Terex S80XCH-3101 Bedienungsanleitung

Operator's Manual

Serial Number Range

S®-80 XC™

from S80XCH-3101

from S85XCH-

3091

S®-85 XC™

with

Maintenance

Information

Original Instructions

Second Edition

Third Printing

Part No. 1311085GT

FrontMatter

Operator's Manual Second Edition • Third Printing

S®-80 XC™• S®-85 XC™Part No. 1311085GT

Manufacturer:

Terex Global GmbH

Bleicheplatz 2

Schaffhausen, 8200

Switzerland

EU Authorized representative:

Genie Industries B.V.

Boekerman 5

4751 XK OUD GASTEL

The Netherlands

UK Authorized representative:

Genie UK Limited

The Maltings

Wharf Road

Grantham

NG31 6BH

Contents

Introduction ............................................................1

Symbol and Hazard Pictorials Definitions..............5

General Safety .......................................................8

Personal Safety................................................... 11

Work Area Safety................................................ 12

Legend ................................................................ 23

Controls............................................................... 24

Inspections.......................................................... 32

Operating Instructions......................................... 47

Transport and Lifting Instructions ....................... 64

Maintenance ....................................................... 67

Specifications...................................................... 71

Second Edition: Third Printing, September 2022

Genie and "S" are registered trademarks of Terex South

Dakota, Inc. in the U.S.A. and many other countries.

"XC" is a trademark of Terex South Dakota, Inc.

Complies with EC Directive 2006/42/EC

See EC Declaration of Conformity

Supply of Machinery (Safety) Regulations 2008

Second Edition • Third Printing Operator's Manual

Introduction

Part No. 1311085GT S®-80 XC™• S®-85 XC™1

Intr od ucti o n

About this manual

Genie appreciates your choice of our machine for

your application. Our number one priority is user

safety, which is best achieved by our joint efforts.

This book is an operation and daily maintenance

manual for the user or operator of a Genie

machine.

This manual should be considered a permanent

part of your machine and should remain with the

machine at all times. If you have any questions,

contact Genie.

Product Identification

The machine serial number is located on the serial

label.

Serial number stamped

on chassis

Serial label

(located under cover)

Intended Use and Familiarization

Guide

The intended use of this machine is to lift

personnel, including tools, and materials to an

aerial work site. Before operating the machine, it’s

the operator’s responsibility to read and

understand this familiarization guide.

Each person must be trained to operate a

Mobile Elevating Work Platform (MEWP).

Familiarization with the MEWP must be given

to each person who is authorized, competent

and trained.

Only trained and authorized personnel should

be permitted to operate the machine.

The operator is responsible to read,

understand, and obey the manufacturer’s

instructions and safety rules provided in the

Operator’s Manual.

The Operator’s Manual is located in the

manual storage container, at the platform.

Operator's Manual Second Edition • Third Printing

Introduction

2 S®-80 XC™• S®-85 XC™Part No. 1311085GT

Platform controls symbology and related

machine movement:

Platform

level

Platform rotate

Jib boom up/down

Boom up/down

Boom extend/retract

Turntable rotate

Drive forward/reverse

Steer right/left

Ground controls symbology and related

machine movement:

Platform level, jib boom

up/down, boom

extend/retract,and boom

up/down

Turntable rotate and

platform rotate

Sequential functions and movement:

•Drive and steer.

Interlocked functions:

•Elevated drive speed.

•Elevated drive in an off-level condition.

•Drive enable when the boom is rotated past the

non-steer wheels.

•All platform and ground controls.

Limitations of use:

•The intended use of this machine is to lift

personnel, including tools, and materials to an

aerial work site.

•Do not elevate the platform unless the machine

is on firm level ground.

Stability enhancing means:

•Foam filled tires (if equipped).

Restricted operating envelope:

•1,000 lbs/454 kg platform capacity.

Second Edition • Third Printing Operator's Manual

Introduction

Part No. 1311085GT S®-80 XC™• S®-85 XC™3

Bulletin Distribution and

Compliance

Safety of product users is of paramount

importance to Genie. Various bulletins are used by

Genie to communicate important safety and

product information to dealers and machine

owners.

The information contained in the bulletins is tied to

specific machines using the machine model and

serial number.

Distribution of bulletins is based on the most

current owner on record along with their

associated dealer, so it is important to register

your machine and keep your contact information

up to date.

To ensure safety of personnel and the reliable

continued operation of your machine, be sure to

comply with the action indicated in a respective

bulletin.

To view any open bulletins for your machine, visit

us on the web at www.genielift.com.

Contacting the Manufacturer

At times it may be necessary to contact Genie.

When you do, be ready to supply the model

number and serial number of your machine, along

with your name and contact information. At

minimum, Genie should be contacted for:

Accident reporting

Questions regarding product applications and

safety

Standards and regulatory compliance information

Current owner updates, such as changes in

machine ownership or changes in your contact

information. See Transfer of Ownership, below.

Transfer of Machine Ownership

Taking a few minutes to update owner information

will ensure that you receive important safety,

maintenance and operating information that

applies to your machine.

Please register your machine by visiting us on the

web at www.genielift.com or by calling us toll free

at 1-800-536-1800.

Operator's Manual Second Edition • Third Printing

Introduction

4 S®-80 XC™• S®-85 XC™Part No. 1311085GT

Danger

Failure to obey the instructions and

safety rules in this manual will result

in death or serious injury.

Do Not Operate Unless:

You learn and practice the principles of safe

machine operation contained in this operator’s

manual.

1 Avoid hazardous situations.

Know and understand the safety rules

before going on to the next section.

2 Always perform a pre-operation inspection.

3 Always perform function tests prior to use.

4 Inspect the workplace.

5 Only use the machine as it was intended.

You read, understand and obey the

manufacturer’s instructions and safety rules—

safety and operator’s manuals and machine

decals.

You read, understand and obey employer’s

safety rules and worksite regulations.

You read, understand and obey all applicable

governmental regulations.

You are properly trained to safely operate the

machine.

Safety Sign Maintenance

Replace any missing or damaged safety signs.

Keep operator safety in mind at all times. Use mild

soap and water to clean safety signs. Do not use

solvent-based cleaners because they may

damage the safety sign material.

Hazard Classification

Decals on this machine use symbols, color coding,

and signal words to identify the following:

Safety alert symbol

—

used to alert

you to potential personal injury

hazards. Obey all safety

messages th

at follow this symbol

to avoid possible injury or death.

Indicates a hazardous situation

which, if not avoided, will result in

death or serious injury.

Indicates a hazardous situation

which, if not avoided, could result

in death or serious

injury.

Indicates a hazardous situation

which, if not avoided, could result

in minor or moderate injury.

Indicates a property damage

message.

Second Edition • Third PrintingOperator's Manual

Symbol and Hazard Pictorials Definitions

Part No. 1311085GT S®-80 XC™• S®-85 XC™5

Symb ol and H az ard Pict or i als De fi nit i on s

Fire hazard Explosion hazard Explosion hazard Do not use ether or

other high energy

starting aids on

machines equipped

with glow plugs.

No smoking.

No flame.

Stop engine.

Fire extinguisher No smoking Explosion hazard Electrocution hazard Maintain required

clearance

Tip-over hazard Tip-over hazard Tip-over hazard Tip-over hazard Tire specifications

Operator's Manual Second Edition • Third Printing

Symbol and Hazard Pictorials Definitions

6 S®-80 XC™• S®-85 XC™Part No. 1311085GT

Wheel load Wind speed Maximum capacity Manual force Weight of welder

reduces capacity

Tie-down point Lifting point Platform tie-down

instructions

Lifting and tie down

instructions

Lanyard anchorage

points

Corrosive acid. Color coded direction

arrows

Runaway hazard Collision hazard Overhead obstruction

Second Edition • Third Printing Operator's Manual

Symbol and Hazard Pictorials Definitions

Part No. 1311085GT S®-80 XC™• S®-85 XC™7

Electrocution hazard Avoid contact Disconnect battery Voltage rating for

power to platform

Pressure rating for air

line to platform

Crush hazard Support the platform

or boom during

maintenance

Read the service

manual

Explosion hazard Relieve all pressure

Recovery procedure if tilt alarm sounds while

elevated.

Platform downhill:

1 Retract boom.

2 Lower boom.

Platform uphill:

1 Lower boom.

2 Retract boom.

Read the operator’s

manual

Auxiliary lowering Access by trained and

authorized personnel

only

Operator's Manual Second Edition • Third Printing

General Safety

8 S®-80 XC™• S®-85 XC™Part No. 1311085GT

Gener al Saf et y

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Terex Hubarbeitsbühne Handbücher

Terex

Terex Genie SX-180 Bedienungsanleitung

Terex

Terex Genie GS-2669DC Bedienungsanleitung

Terex

Terex Gyro 4020 Bedienungsanleitung

Terex

Terex Genie S-80 Installations- und Betriebsanleitung

Terex

Terex Genie Z-135/70 Installations- und Betriebsanleitung

Terex

Terex Z60H-3506 Bedienungsanleitung

Terex

Terex Genie S-80 XC Series Installations- und Betriebsanleitung

Terex

Terex Genie S-60 FE Bedienungsanleitung

Terex

Terex SX15015-101 Bedienungsanleitung

Terex

Terex Z-30/20N RJ Bedienungsanleitung

Terex

Terex C5000 Series Bedienungsanleitung

Terex

Terex Genie Z-45 Bedienungsanleitung

Terex

Terex Z30NF-23000 Bedienungsanleitung

Terex

Terex Genie Lift Guard S-40 Bedienungsanleitung

Terex

Terex Genie Z-34/22 IC Installations- und Betriebsanleitung

Terex

Terex Genie Z-45 XC Bedienungsanleitung

Terex

Terex S40XCH-3292 Bedienungsanleitung

Terex

Terex Genie GTH-636 Bedienungsanleitung

Terex

Terex Genie ZX-135/70 Bedienungsanleitung

Terex

Terex Genie Z-45/25 Bi-Energy Bedienungsanleitung

Terex

Terex GTH10T-16501 Installations- und Betriebsanleitung

Terex

Terex ZX13515-2558 Bedienungsanleitung

Terex

Terex Z-33 Bedienungsanleitung

Terex

Terex Genie Z-40N Bedienungsanleitung

Beliebte Hubarbeitsbühne Handbücher anderer Marken

Genie

Genie Z-80 Bedienungsanleitung

Genie

Genie Z-45/25 Bedienungsanleitung

JLG

JLG Skytrak 6036 Gebrauchs- und Pflegehandbuch

LGMG

LGMG T65JE Bedienungsanleitung

Genie

Genie Z-135/70 Bedienungsanleitung

Oshkosh Corporation

Oshkosh Corporation JLG H800AJ Gebrauchs- und Pflegehandbuch

Oshkosh

Oshkosh JLG 1500SJ Installations- und Benutzerhandbuch

Skyjack

Skyjack SJ30AJE Bedienungsanleitung

Oshkosh

Oshkosh JLG 800A Installations- und Benutzerhandbuch

Skyjack

Skyjack SJ 46AJ Bedienungsanleitung

Molift

Molift Quick Raiser 205 Bedienungsanleitung

Snorkel

Snorkel SL26RTE Kurzanleitung

Oshkosh Corporation

Oshkosh Corporation JLG E300A Bedienungsanleitung

Skyjack

Skyjack SJ45 T+ Bedienungsanleitung

Genie

Genie S-105 Bedienungsanleitung

nifty

nifty 170SD series Montageanleitung

JLG

JLG 15MVL Series Bedienungsanleitung

Genie

Genie Z-45 XC Bedienungsanleitung