8
Select the speed required for making cookies by setting the control knob and switch on the machine; we recommend setting the
speed control to 4 to 5 for making cookies.
Take out the cookies coming from the attachment and set them aside onto a prepared tray (21).
Drum grater
Assemble the grater before attaching it to the machine. Place the chosen stainless steel blade for coarse grating, fine grating
or slicing into the body of the grater and make sure that it is firmly attached to the protrusions inside the grater (22). Set the
arresting collar onto the grater so that the protrusion is aligned with the releasing symbol and arrest the collar by rotating it to
the tightening position (23). Attach the assembled drum grater to the machine in the same way as the meat mincer.
Grating and slicing food
The drum blade with large holes and the drum blade with small holes are intended for coarsely and finely grating vegetables, fruit,
nuts, chocolate, cheese, as well as for preparing bread crumbs (only the blade with small holes). The slicing blades are used for
evenly slicing fruit and vegetables.
Place a container under the end of the grater to collect the grated food (24). Select the speed required for grating or slicing and
switch on the machine; we recommend setting the speed control to 3 to 4 for grating and slicing.The maximum permitted period
of grating is 6 minutes at a time.
Always use the tamper to fill the grater; never push food with your fingers or other unauthorised tools (25).
Blender
Remove the cover of the blender connecting piece (26). Attach the blender jar to the connecting piece so that the mark in the
bottom part is aligned with the releasing symbol . Rotate the jar so that the arrow is aligned with the tightening symbol and
attach the blender jar to the body of the machine (27).
Remove the lid, pour at least 200 ml of liquid into the blender jar and fill the jar with ingredients cut into pieces no larger than
2 × 2 cm; do not exceed the 1,250 ml mark (28).
Notice: Never blend in the jar without liquid inside; the minimum amount of liquid is 200 ml.
Set the cap onto the jar. Select the required blending speed by setting the control knob and switch on the machine; we recommend
setting the speed control to 6 for blending. The maximum period of blending is 2 minutes at a time. Set the control knob to the
OFF position to stop blending.
Safety lock
The blender connecting piece has a safety lock activated by removing the cover of the blender connecting piece. If the blender jar
is not attached to the blender connecting piece while the cover is removed, the machine cannot be switched on. Do not remove
the cover of the blender connecting piece while whipping, mixing, kneading, making sausages and meat rolls, making cookies
and grating, otherwise the machine will stop. If the machine stops, set the cover of the connecting piece back on and switch the
machine on again by setting the control knob.
Pulse blending with gradually added ingredients
To prepare drinks or food with a high content of solid ingredients such as root vegetables, pumpkins, nuts, yogurt, ice cream, etc.,
use the pulse function with gradually added ingredients. After blending the liquid with a small amount of ingredients using the
pulse function, remove the closure of the filling hole from the lid of the jar by rotating counter-clockwise and add another small
amount of cut ingredients through the opening (29). Set the closure back on and continue running the pulse function with
gradually added ingredients.
Notice: Do not use the blender to chop ice and meat. Do not place into the blender jar any liquids and ingredients that have
a temperature exceeding 50 °C. Do not use the glass blender jar in a microwave oven. If the fruit or vegetables being blended are too
hard or cut into pieces that are too large, the blender will stop. Set the speed control to the OFF position and remove the pieces that are
