Testrite Visual Charisma Frame XSMA Bedienungsanleitung

Page 1 of 2Version: 1

1. Mount the wall plates using the screws and anchors appropriate for your surface.

2. Slide the rail sections through the wall mounts.

3. Connect the rail sections using the joiners and screws provided.

4. Connect the caps to the ends of the joined rail.

5. Assemble the frame. See next page for detailed instructions.

6. Install the graphic. See next page for detailed instructions.

7. Hang the frame on the rail.

Hang-On Perimeter Rail System with Charisma Frame - XSMA™

1. 2.

4.3. 5.

6. 7.

Screws mount

on back

After

Page 2 of 2Version: 1

Hang-On Perimeter Rail System with Charisma Frame - XSMA™

For proper assembly, it is important to notice that two frame-sides have brackets pre-mounted, and two sides do not.

1. Using the screws provided, attach the two frame-sides without bracket to the rst frame side with brackets.

2. Connect the second frame-side with brackets to the assembled portion of the frame.

3. Insert center support bracket into bottom extrusion channel. Repeat for top frame extrusion. Tighten the set screws to secure.

4. Once the entire frame is assembled, go back and fully tighten all screws (not shown).

5. To install the graphic, take the corner with the pull tag on it and press about 6”-10” of silicone into the frame channel corner A. Repeat

for the opposite corner B. Repeat for the next corner C. Lastly, repeat for the nal corner D.

6. After all corners are pressed in, press the silicone into the frame channel at the mid-points on all four sides.

7. Press silicone into frame evenly between the corners and midpoints.

This prevents the graphic from bunching up or stretching too much and will ensure a smooth and tight t.

8. To remove the graphic from the frame, simply pull up on the pull tag.

6.5.

pull tag

1. 2.

Loosen

Tighten

Hangers are

pre-mounted

Stand-os are

pre-mounted

Inhaltsverzeichnis

Andere Testrite Visual Rack & Stand Handbücher

Testrite Visual

Testrite Visual Skyscraper Mightee Mount SKMM Series Bedienungsanleitung

Testrite Visual

Testrite Visual Charisma SEG XSS Custom Adjustable Series Bedienungsanleitung

Testrite Visual

Testrite Visual Privacy Stand PVC3 Bedienungsanleitung

Testrite Visual

Testrite Visual Charisma SEG Expo Stand XP Series Bedienungsanleitung

Testrite Visual

Testrite Visual Charisma SEG Epic Stand XS Series Bedienungsanleitung

Testrite Visual

Testrite Visual Charisma SEG XSS Custom Adjustable Series Bedienungsanleitung

Testrite Visual

Testrite Visual Rolling Teacher Shield Series Bedienungsanleitung

Testrite Visual

Testrite Visual Charisma SEG XSS Series Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung