Texas Instruments HSS-MOTHERBOARDEVM Bedienungsanleitung

SLVUBD4A–January 2018–Revised December 2018

High Side Switch Motherboard Evaluation Module

User's Guide

SLVUBD4A–January 2018–Revised December 2018

High Side Switch Motherboard Evaluation Module

The HSS-MOTHERBOARDEVM evaluation module is designed to evaluate the <50-mΩRon devices in

TI's high side switch portfolio. These devices include TPS1HA08-Q1, TPS2HB08-Q1, TPS2HB16-Q1,

TPS2HB35-Q1, and TPS2HB50-Q1. This board does not come with the devices populated but allows any

of the devices to be soldered down on the sample daughter card and used in the main motherboard. This

user's guide provides the connectors and test point description, schematic, bill of materials (BOM), and

board layout of the EVM.

NOTE: This EVM does NOT come with devices populated on the board. The user MUST order

samples separately.

Contents

1 Introduction ................................................................................................................... 2

1.1 Descriptions ......................................................................................................... 2

1.2 Applications.......................................................................................................... 2

1.3 Features.............................................................................................................. 3

2 HSS-MOTHERBOARDEVM Schematic .................................................................................. 4

3 Connections Descriptions................................................................................................... 7

3.1 Connectors and Test Points....................................................................................... 7

3.2 Jumpers.............................................................................................................. 8

4 TPS2HB08-50EVM EVM Assembly Drawings and Layout............................................................. 9

5 Current Limit ................................................................................................................ 11

6 Current Sense .............................................................................................................. 11

7 Transient Protection........................................................................................................ 11

8 Soldering Down U2 ........................................................................................................ 11

9 Bill of Materials ............................................................................................................. 11

List of Figures

1 HSS-MOTHERBOARDEVM Motherboard Schematic.................................................................. 5

2 HSS-MOTHERBOARDEVM Sample Daughter Card Schematic...................................................... 6

3 HSS-MOTHERBOARDEVM Layout and Routing (Top View) ......................................................... 9

4 HSS-MOTHERBOARDEVM Layout and Routing (Bottom View).................................................... 10

List of Tables

1 Connector and Test Point Descriptions................................................................................... 7

2 Jumper Descriptions......................................................................................................... 8

Trademarks

All trademarks are the property of their respective owners.

Introduction

www.ti.com

2SLVUBD4A–January 2018–Revised December 2018

Submit Documentation Feedback

High Side Switch Motherboard Evaluation Module

1 Introduction

Texas Instruments' HSS-MOTHERBOARDEVM evaluation module has a central socket for the supporting

daughtercard with the high side switch device to be populated. The EVM supports the entire single-

channel and dual channel low Ron (≤50-mΩ) high-side driver applications. The purpose of this EVM is to

facilitate evaluation of the low Ron high side switches for the diagnostic features and drive resistive,

capacitive, and inductive loads.

The EVM is a combination of a central motherboard and a row of daughterboards. The mother board has

all connectors, jumpers, and test points. The daughter board has different footprints to support the low

Ron family of TI's high side switch portfolio. The daughter board also has limiting resistors for the channel

devices (TPS2HBxx-Q1) and since the 1 channel device (TPS1HA08-Q1) has a NC pin in that location the

daughtercards will work for all of the devices.

The daughterboards have 2 different footprints: 24 pin PWP and 16 pin PWP. For installation, a single

board from the panel has to broken, a device soldered down onto the main footprint, and connected to the

motherboard.

NOTE: Caution must be taken when soldering down the device as the main power pad on the back

needs to be soldered correctly as to not affect performance. Please see PowerPAD

Thermally Enhanced Package app note for more details about the solder profile and

techniques.

The current-limiting resistors are on the bottom side of the daughterboard. They are all 10-kΩ, 0805

package. For the desired current limit value, the resistor can be replaced with different value. Also for the

single channel devices the second resistor should be depopulated.

The jumpers are not installed. Refer to Table 1 and Table 2 for installation.

1.1 Descriptions

The Texas Instruments HSS-MOTHERBOARDEVM helps designers evaluate the operation and

performance of the TPS1HA08-Q1, TPS2HB08-Q1, TPS2HB16-Q1, TPS2HB35-Q1 and TPS2HB50-Q1

devices.

These devices are fully-protected high-side switches, with an integrated NMOS power FET, and charge

pump. Full diagnostics and high-accuracy current sense features enable intelligent control of the load.

The device diagnostic reporting supports load current status and device temperature on an analog sense

output pin SNS. The SNS pin sources a current proportional to the selected parameter. By adding a

pulldown resistor on the SNS pin, the developed voltage is proportional to the selected parameter as well.

The diagnostics can be disabled for multiplexing the sense pin between different devices.

1.2 Applications

The EVM is used in the following applications:

• High-side relay drivers

• High-side power switch for submodule power supply

• Bulb driver

• General resistive, inductive, and capacitive loads

• Replace electromechanical relays and fuses

www.ti.com

Introduction

SLVUBD4A–January 2018–Revised December 2018

High Side Switch Motherboard Evaluation Module

1.3 Features

The EVM supports the following features:

• Single or Dual-channel high-side power switches, tested according to AECQ100-12

• Operating voltage 3 V to 18V

• Operating temperature: –40ºC to 125ºC

• Microcontroller input control: 3.3-V and 5-V logic compatible

• High-accuracy current sense

– Analog current sense as a ratio of the load current or device temperature

• Protection:

– Reverse battery protection with external ground network

– Short-circuit protection

– Overvoltage protection

– Thermal shutdown and thermal swing with self-recovery

– ESD protection

• Diagnostic:

– On and off state output open or short to battery detection

– Overload and short-to-ground detection and power limiting

– Thermal shutdown and thermal swing diagnostic

– Immediate shutdown or continuous clamping during fault current condition

– Diagnostic enable function for multiplexing of MCU analog or digital port

HSS-MOTHERBOARDEVM Schematic

www.ti.com

4SLVUBD4A–January 2018–Revised December 2018

Submit Documentation Feedback

High Side Switch Motherboard Evaluation Module

2 HSS-MOTHERBOARDEVM Schematic

Figure 1 and Figure 2 illustrate the TPS2HB08-50EVM motherboard and daughterboard schematics, respectively.

www.ti.com

HSS-MOTHERBOARDEVM Schematic

SLVUBD4A–January 2018–Revised December 2018

High Side Switch Motherboard Evaluation Module

Figure 1. HSS-MOTHERBOARDEVM Motherboard Schematic

HSS-MOTHERBOARDEVM Schematic

www.ti.com

6SLVUBD4A–January 2018–Revised December 2018

Submit Documentation Feedback

High Side Switch Motherboard Evaluation Module

Figure 2. HSS-MOTHERBOARDEVM Sample Daughter Card Schematic

www.ti.com

Connections Descriptions

SLVUBD4A–January 2018–Revised December 2018

High Side Switch Motherboard Evaluation Module

3 Connections Descriptions

3.1 Connectors and Test Points

Table 1 lists the EVM connector and test point descriptions.

Table 1. Connector and Test Point Descriptions

Connectors and Test Points Descriptions

J23 High-current input terminal for VBB

J26 High-current output for VOUT1

J27 High-current output for VOUT2

J28 High-current output for paralleling 2 channels into single channel VOUT

J25 High-current input terminal for GND

Vbb_Sense (TP11) Test point used to measure VBB Votlage

Vout1_Sense (TP10) Test point to measure VOUT1 Voltage

Vout2_Sense (TP12) Test point to measure VOUT2 Voltage

EN1 (TP3) Test point used to apply power to EN1, only use when J9 is not connected to 5V or GND

EN2 (TP7) Test point used to apply power to EN2, only use when J13 is not connected to 5V or GND.

Only for 2 channel devices.

DIA_EN (TP4) Test point used to apply power to DIA_EN, only use when J10 is not connected to 5 V or

GND

SEL1 (TP5) Test point used to apply power to SEL1, only use when J12 is not connected to 5 V or GND

SEL2 (TP6) Test point used to apply power to SEL2, only use when J11 is not connected to 5 V or GND

LATCH (TP2) Test point used to apply power to LATCH, only use when J8 is not connected to 5 V or GND

SNS (TP1) Test point used to measure SNS

TP17 Connects to ISNS1 on the daughtercard

TP18 Connects to ISNS2 on the daughtercard. Only for 2 channel devices.

TP8 5-V external input terminal for 5-V EVM

TP13, TP14, TP15, TP16 This is a direct connection to the GND plane of the EVM

Connections Descriptions

www.ti.com

8SLVUBD4A–January 2018–Revised December 2018

Submit Documentation Feedback

High Side Switch Motherboard Evaluation Module

3.2 Jumpers

Table 2 lists the EVM jumper descriptions.

Table 2. Jumper Descriptions

Jumpers Description

J9 This jumper is used to connect the EN1 pin to 5 V (1-2) or GND (2-3).

J13 This jumper is used to connect the EN2 pin to 5V (1-2) or GND (2-3). Only for 2 channel devices

J10 This jumper is used to connect the DIA_EN pin to 5 V (1-2) or GND (2-3)

J12 This jumper is used to connect the SEL1 pin to 5 V (1-2) or GND (2-3).

J11 This jumper is used to connect SEL2 pin to 5 V (1-2) or GND (2-3)

J4 This jumper connects the TLV70450DBVR ground pin 1 to EVM GND. This with J5 enables LDO

J24 This jumper is used to bypass the ground network used for reverse polarity protection

J3 This jumper is used to power the 5-V TLV70450DBVR LDO with the VBB input for the EVM

J8 This jumper is used to connect the LATCH pin to 5 V (1-2) or GND (2-3)

J5 This jumper connects TLV70450DBVR output to LDO_5V. This with J4 enables LDO.

J6 This jumper connects LDO_5V to the 5-V supply net on the EVM (1-2) or Extern_5V (2-3)

J1, J2, J16 These jumpers connect the motherboard to the daughterboard

J17, J18, J19 Connect Vout1 to single channel

J20, J21, J22 Connect Vout2 to single channel

www.ti.com

TPS2HB08-50EVM EVM Assembly Drawings and Layout

SLVUBD4A–January 2018–Revised December 2018

High Side Switch Motherboard Evaluation Module

4 TPS2HB08-50EVM EVM Assembly Drawings and Layout

Figure 3 show the design of the HSS-MOTHERBOARDEVM and daughterboard PCB. The EVM was

designed using FR4 material on a two-layer board. All components are located in an active area on the

top side and active traces are provided in the top and bottom layers to allow the user to easily view,

probe, and evaluate. Moving components to both sides of the PCB can offer additional size reduction for

space-constrained systems.

Figure 3. HSS-MOTHERBOARDEVM Layout and Routing (Top View)

TPS2HB08-50EVM EVM Assembly Drawings and Layout

www.ti.com

10 SLVUBD4A–January 2018–Revised December 2018

Submit Documentation Feedback

High Side Switch Motherboard Evaluation Module

Figure 4. HSS-MOTHERBOARDEVM Layout and Routing (Bottom View)

Andere Handbücher für HSS-MOTHERBOARDEVM

Inhaltsverzeichnis

Andere Texas Instruments Steuereinheit Handbücher

Texas Instruments

Texas Instruments DRV10974 EVM Bedienungsanleitung

Texas Instruments

Texas Instruments TPS1213Q1EVM Bedienungsanleitung

Texas Instruments

Texas Instruments TPS55165Q1-EVM Bedienungsanleitung

Texas Instruments

Texas Instruments TAS5782M Bedienungsanleitung

Texas Instruments

Texas Instruments BoosterPack BOOSTXL-ADS1119 Bedienungsanleitung

Texas Instruments

Texas Instruments TPS73633EVM Bedienungsanleitung

Texas Instruments

Texas Instruments DLP DLPC4420AEVM Bedienungsanleitung

Texas Instruments

Texas Instruments DLP LightCrafter 3010 Gen2 Bedienungsanleitung

Texas Instruments

Texas Instruments ADS5237 EVM Bedienungsanleitung

Texas Instruments

Texas Instruments TPS54362B EVM Bedienungsanleitung

Texas Instruments

Texas Instruments MCT8316ZT Bedienungsanleitung

Texas Instruments

Texas Instruments DRV8833C Bedienungsanleitung

Texas Instruments

Texas Instruments SimpleLink BoosterPack BOOSTXL-CC3120MOD Bedienungsanleitung

Texas Instruments

Texas Instruments TLC6A598 Bedienungsanleitung

Texas Instruments

Texas Instruments AWR1443 Bedienungsanleitung

Texas Instruments

Texas Instruments BQ25672EVM Bedienungsanleitung

Texas Instruments

Texas Instruments INA901EVM-CVAL Bedienungsanleitung

Texas Instruments

Texas Instruments TPS54331 Bedienungsanleitung

Texas Instruments

Texas Instruments DAC38RF8xEVM Series Bedienungsanleitung

Texas Instruments

Texas Instruments TPS54521EVM-607 Bedienungsanleitung

Texas Instruments

Texas Instruments CC1101EMK Bedienungsanleitung

Texas Instruments

Texas Instruments bq2060AEVM-001 Bedienungsanleitung

Texas Instruments

Texas Instruments BOOSTXL-SENSORS BoosterPack Bedienungsanleitung

Texas Instruments

Texas Instruments TPA152 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung