Texecom Veritas Excel Master Bedienungsanleitung
Installation Manual
Veritas Excel Keypad
INS165
2 INS165
Installation
The Veritas Excel Remote Keypad (RKP) is only suitable for use with
the Texecom Veritas Excel Control Panel. Any combination of the
Veritas RKP & Veritas Excel keypad may be used, up to 6 in total,
with the Veritas Excel.
Mounting
Open the keypad by carefully inserting a small flat-blade
screwdriver into each slot at the base of the unit. Gently push the
screwdriver to ease the retaining clips upward, DO NOT LEVER OR
TWIST. Excessive force is NOT required. The front flap and front
cover can now be removed.
Mount the keypad using at least two appropriate countersunk
screws (no larger than No. 8). A keyhole slot has been provided to
assist mounting and aid levelling.
INS165 3
Wiring
It is strongly recommended that the system is completely powered
down (mains and battery) before wiring a keypad.
Connect the keypad to the control panel using 4-core cable as
follows:
Keypad
Control Panel
12V AUX+
0V AUX-
T T
R R
Up to six keypads may be connected in parallel (star) or series
(daisy-chain) or any combination.
!
"
When using long cable runs or connecting keypads in series
(daisy-chain) ensure that the voltage at the keypad is not
more than 2V less than the voltage at the control panel.
When using 6-core or 8-core cable always use the spare
cores to “double-up” on 0V. This will allow longer cable runs
particularly when connecting keypads in series (daisy-chain).
As a rule ‘trebling-up’ on 0V will be more beneficial than
‘doubling-up’ on 12V and 0V.
4 INS165
Selecting an Address
Each keypad MUST be given a different address using the DIP
switch on the PCB as follows:
Address
DIP 1
DIP 2
DIP 3
DIP 4
1 N/A Off Off Off
2 N/A Off Off On
3 N/A Off On Off
4 N/A Off On On
5 N/A On Off Off
6 N/A On Off On
!
"
NEVER set two RKPs to the same address.
Keypads are factory set to address 1.
If the keypad is powered but offline (i.e. T and R not
connected) it will display its address.
If an invalid address is selected, the keypad will sound an
error tone
INS165 5
Configuring The Keypad
When the system is powered up it automatically checks and
configures all connected keypads. It is strongly recommended that
the system is completely powered down (mains and battery) before
wiring a keypad. If a keypad is added without removing power then
it must be configured as follows:
From the unset state:
Enter your Engineer code
!!!!
!!!!!!!!
!!!!
Press
"
""
"to access the Programming Menu
Enter
#$
#$#$
#$ to select the Configure RKPs option
Press
"
""
", the system will chime & scan for RKP addresses 1 - 6
Press
%
%%
%to return to the Programming Menu
Press
%
%%
%to return to the unset state
!
"
If an RKP is configured but off-line the system will have a
tamper fault.
6 INS165
Programming Mode
To access the Installer programming mode:
Enter the Engineer Access code
!!!!
!!!!!!!!
!!!! and press
"
""
",the display will read as follows for 10 seconds:
!"#$%&'()#*#(
+,"#-"(.#%*///(
(
After 10 seconds the display will read as follows:
+01'0#2(31$"(
4&*"0(56*%1&(((7(
To quit programming press
%
%%
%and the system will return to
unset.
!
"
If you encounter problems, press
%
%%
%to return the system
to unset.
If no keys are pressed, the system will automatically return to
unset after 4 minutes.
There are two ways to select options whilst in the programming
mode:
1. Select an option directly by entering a 2-digit number (e.g. for
changing your Access code, enter
&#).
2. Wherever a
'symbol appears on the display, use the
'key to scroll up and down through the menus and press
(or
"to access the menu.
INS165 7
(+01'0#2(31$"(
4&*"0(56*%1&(((7(
(
'(+01'0#2(31$"(
3%-8/(56*%1&-((7(
(
'(+01'0#2(31$"(
91&"(:;6"-(((((7(
(
'(+01'0#2(31$"(
91&"(<=#&'"-(((7(
(
'(+01'0#2(31$"(
)#*"(>(:%2"((((7(
(
'(+01'0#2(31$"(
?;-*"2(:%2"0-((7(
(
'(+01'0#2(31$"(
@%".(A1'(((((((7(
(
'(+01'0#2(31$"(
?B%*"-(((((((((7(
(
'(+01'0#2(31$"(
<1$"(+CD-((((((7(
(
'(+01'0#2(31$"(
<1$"(:;6"-(((((7(
(
'(+01'0#2(31$"(
<122B&%8#*10(((7
(
'(+01'0#2(31$"(
?;-*"2(:"-*-(((7
!
"
Wherever a
'symbol
appears on the display,
use the
'key to
scroll up and down
through the menus and
press
(or
"to
access the menu option.
!
"
To display an explanation
of the Misc. or Comm.
options associated with a
particular number, press
and hold the
corresponding key
!.
!
"
To display the descriptive
text associated with a
particular zone number,
press and hold the
corresponding key
!.
((
'(+01'0#2(31$"(
:"E*(((((((((((7(
8 INS165
)+01'0#2(31$"(
3%-8/(56*%1&-((7(
(
)+01'0#2(31$"(
91&"(:;6"-(((((7(
##
)
3%-8/(56*-(F(((7(
56*-/(G(/HI///J/(
(
**
)
9KL(91&"(K(((((7(
G4&*0;M4E%*(
#*
)
3%-8/(56*-(K(((7(
56*-/(G(KHI////N(
(
*+
)
9HL(91&"(H(((((7(
GC&=%O%*"$(4&*0;(
#+
)
3%-8/(56*-(H(((7(
56*-/(G(//////J/(
(
*,
)
9IL(91&"(I(((((7(
GPB#0$(
#,
)
3%-8/(56*-(I(((7(
56*-/(G(////////(
(
*-
)
9QL(91&"(Q(((((7(
GPB#0$(
#-
)
R,2(R8*%S#*%1&-7(
GFI(
(
*.
)
9TL(91&"(T(((((7(
GPB#0$(
#/
)
A1#$()"U#B,*-((7(
+0"--(V+01'W(
(
*&
)
9XL(91&"(X(((((7(
GPB#0$(
#0
)
?YZ(5B*6B*(((((7(
G?"*(+1-(Z(!"-"*(
(
*/
)
9JL(91&"(J(((((7(
GPB#0$(
#$
)
INS165 9
)+01'0#2(31$"(
91&"(<=#&'"-(((7(
(
)+01'0#2(31$"(
)#*"(>(:%2"((((7(
+#
)
<=#&'"(1&(+?"*(7(
+#0*(?"*-(GK/I/(
(
+.
)
<B00"&*()#*"(((7(
GFKMFQMFF(
+*
)
<=#&'"(*1(4M4&*7(
91&"-(G(/H//////(
(
+&
)
<B00"&*(:%2"(((7(
KHLFF/FF(
++
)
<=#&'"(*1(CM4&*7(
91&"-(G(////////(
(
+/
)
?"0S%8"(:20(K((7(
GHTMKHMFF(
+,
)
<=#&'"(*1(PB#0$7(
91&"-(G(K///////(
(
+0
)
?"0S%8"(:20(H((7(
GKQMFJMFF(
)(
(
+$
)
?"0S%8"(:20(I((7(
GFKMFKMFK(
!
"
To display the descriptive text associated with a particular
zone number, press and hold the corresponding key
!
!!
!.
Options 27, 28 and 29 (Service Timers 1, 2 and 3) can only be
accessed once the time and date have been programmed.
10 INS165
)+01'0#2(31$"(
?;-*"2(:%2"0-((7(
(
)+01'0#2(31$"(
@%".(A1'(((((((7(
,*
)
\B,,(?"*(4E%*((7(
GIF(-"81&$-(
(
$-
)
4E*"&$"$(A1'(((7(
V+01'W(*1(@%".(
,+
)
+#0*(?"*(4E%*((7(
GIF(-"81&$-(
(
+-
)
?%*"(C)((((((((7(
C)L(FKHIQTX(
,,
)
\B,,(?"*(4&*0;(7(
GIF(-"81&$-(
(
-*
)
]#-%8(A1'(4S*(K7(
R,#02-(K////////(
,-
)
+#0*(?"*(4&*0;(7(
GIF(-"81&$-(
(
-+
)
]#-%8(A1'(4S*(H7(
R,#02-(/H///////(
,.
)
]",,(<B*(5UU(((7(
GKT(2%&B*";-(
(
-,
)
]#-%8(A1'(4S*(I7(
R,#02-(//I//////(
,&
)
+#0*(?"*(3B*"((7(
GKF(-"81&$-(
(
--
)
]#-%8(A1'(4S*(Q7(
R,#02-(///Q/////(
,/
)
]",,()",#;(((((7(
GFF(2%&B*"-(
(
-.
)
]#-%8(A1'(4S*(T7(
R,#02-(////T////(
,0
)
H&$(C&*0B$"0(((7(
GQT(2%&B*"-(
(
-&
)
]#-%8(A1'(4S*(X7(
R,#02-(/////X///(
,$
)
91&"(?1#^(:"-*(7(
GKQ($#;-(
(
-/
)
]#-%8(A1'(4S*(J7(
R,#02-(//////J//
)(
(
-#
)
<,"#0(]#-%8(A1'7(
+0"--(V+01'W
!
"
To display the descriptive text associated with a particular
zone number, press and hold the corresponding key
!.
Andere Handbücher für Veritas Excel Master
3
Inhaltsverzeichnis
Andere Texecom Tastenfeld Handbücher
Texecom
Texecom Premier Series Bedienungsanleitung
Texecom
Texecom Premier Elite Series Bedienungsanleitung
Texecom
Texecom Premier LCDLP Bedienungsanleitung
Texecom
Texecom Premier Elite LCDLP-W Bedienungsanleitung
Texecom
Texecom Premier Elite LCDLP-W Bedienungsanleitung
Texecom
Texecom Premier RKP8 Bedienungsanleitung
Texecom
Texecom Veritas RKP Bedienungsanleitung
Texecom
Texecom PREMIER RKP8PLUS Bedienungsanleitung
Texecom
Texecom Premier RKP4 Bedienungsanleitung
Texecom
Texecom Premier LCDLP Bedienungsanleitung
