Texecom Premier 412 Bedienungsanleitung

User Guide

Premier 412/816/832

IINS195-3

Premier 412/816/832 User Guide

INS195 2

Operating Your Alarm System

This document covers the everyday operation of your alarm system, for details on

more advanced operation and system programming, please refer to the Premier

412/816/832 Master User Manual.

Away Arming the System

Enter your Access code  followed by the /key. The Armed

light will flash and the exit sounder will sound for the duration of the exit time.

Stay Arming the System

Enter your Access code  followed by the key. The system will

normally arm immediately, the Armed light will flash slowly indicating that the

system is Stay armed.

Disarming During Entry

Enter the premises via the designated entry point. The entry tone will sound,

proceed directly to the remote keypad and enter your Access code

.

Disarming When Not in Entry

Proceed directly to the remote keypad and enter your Access code

 followed by the /key. Note: If your system consists of

only one partition you will not have to press the /key.

Bypassing Zones

Enter your Access code  followed by the !key. Enter the zone

or zones to be bypassed e.g. 02, 04 etc. When all required zones have been

selected, press:

/to Away arm the system with the selected zones bypassed

to Stay arm the system with the selected zones bypassed

to return to the normal disarmed state with the selected zones bypassed

Reset Alarms/Faults

Enter your Access code , then enter  or press .

Last Alarm Log

Enter your Access code , and then enter . The remote

keypad will display the zones that caused an alarm when the system was last

armed. Press to return to the normal disarmed state.

Premier 412/816/832 User Guide

INS195 3

Acknowledging a New Service Fault

Should the Service light start flashing, enter your Access code ,

and then enter . The remote keypad will display all Service Faults (see

Service Faults Table on back page). Press or to acknowledge the fault

and return to the normal disarmed state.

Toggle Chime On and Off

Enter your Access code , and then enter ) or .

Change User Access Code

Enter your existing Access code , and then enter . Enter

your new Access code  followed by the /key. Now re-

enter your new Access code  for confirmation.

Abort Communications

Enter your Access code , and then enter .

Operating Your Alarm System with Quick Commands

If your Installer has programmed the Quick Commands the following procedures

can be used:

Away Arming the System

Press the /key. The Armed light will flash and the exit sounder will sound

for the duration of the exit time.

Stay Arming the System

Press the key. The system will normally arm immediately, the Armed light will

flash slowly indicating that the system is Stay armed.

Bypassing Zones

Press the !key. Enter the zone or zones to be bypassed e.g. 02, 04 etc. When

all required zones have been selected, press:

/to Away arm the system with the selected zones bypassed

to Stay arm the system with the selected zones bypassed

to return to the normal disarmed state with the selected zones bypassed

Premier 412/816/832 User Guide

INS195 4

Service Faults Displayed on LED Keypads

Light Fault Condition

1 AC Fail

2 Telephone Line Fault

3 2-Wire Smoke Alarm

Box Tamper & Auxiliary Input:

Press )to view type, lights 1 - 5 indicate:

Light 1 = Box Tamper

Light 2 = Auxiliary Tamper

Light 3 = Auxiliary PA

Light 4 = Auxiliary Tamper (UK Bell Module)

Light 5 = Bell Tamper (UK Bell Module)

5 Date or Time Lost

6 Zone Tamper/Trouble

Press to view zone number

7 Keypad Tamper/Removed

Press to view keypad number

Equipment Faults

Press to view fault type:

Light 1 = Output 1 Fault

Light 2 = Output 2 Fault

Light 3 = Siren/Bell Fault

Light 4 = 2-Wire Smoke Sensor Fault

Light 5 = Auxiliary Fuse Failed

Light 6 = Battery Fault

Light 7 = Service Timer/Zone Soak Test Failed

Light 8 = Communication Fault

Premier 412/816/832 User Guide

FCC Statement

Operation is subject to the following conditions.

•The device must not cause harmful Interference.

•The device must accept any interference received, including interference

that may cause undesired operation.

LAB545 Premier 816 UL label LAB545 Premier 832 UL label

LAB558 Premier 832 RTC UL Label

Canadian Emissions Statements

This class B digital apparatus complies with Canadian ICES – 003

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du

Canada

INS195 5

Premier 412/816/832 User Guide

ANSI/SIA CP-01-2007 Defaults.

For the following please see INS141 Master User Manual

FEATURE REQUIREMENT DEFAUL

Exit Time Required

(programmable)

60 Seconds

Progress Annunciation / Disable - for

Silent Exit

llowed

ll annunciators enabled

Exit Time Restart

Required Option

Enabled

uto Stay Arm on Unvacated Premises Required Option

(except for remote arm)

Enabled

Exit Time and Progress Annunciation /

Disable - for Remote Arm

llowed Option

(for remote arm)

Enabled

Entry Delay(s)

Required

(programmable)

30 Seconds

bort Window

–

or Non-Fire Zones Required Option

Enabled

bort Window Time – for Non-Fire Zones

Required

(programmable)

30 Seconds

bort annunciation Required Option

Enabled

Cancel Window

Required

Not required to be

programmable.

Cancel Annunciation Required Option

Enabled

Duress Feature

llowed Option

Disabled

Cross Zoning Required Option

Disabled

Programmable Cross Zoning Time

llowed

Per manufacturer

Swinger Shutdown Required

(programmable)

One trip

Swinger Shutdown Disable

llowed

Enabled

Fire Alarm Verification Required Option

Disabled

Arming and Disarming the alarm system please refer to the UL-CUL notes on Page 7 & 8

System Programming Menus. Please refer to UL-CUL Notes on Page 16

Glossary Please see page 25

INS195 6

Premier 412/816/832 User Guide

Notes

Premier 412/816/832 User Guide

Texecom Limited, Bradwood Court, St. Crispin Way, Haslingden, Lancashire BB4 4PW, England.

INS195

Andere Handbücher für Premier 412

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Texecom Sicherheitssystem Handbücher

Texecom

Texecom Premier Elite Impaq Contact-W Bedienungsanleitung

Texecom

Texecom Premier Elite 8XP-W Bedienungsanleitung

Texecom

Texecom Premier Elite Series Bedienungsanleitung

Texecom

Texecom Ricochet Impaq Contact-W Bedienungsanleitung

Texecom

Texecom Premier Elite 8XP-W Bedienungsanleitung

Texecom

Texecom Azura 360 Bedienungsanleitung

Texecom

Texecom Premier 816 Bedienungsanleitung

Texecom

Texecom Premier Elite 8XP-W Bedienungsanleitung

Texecom

Texecom Premier Elite Series Bedienungsanleitung

Texecom

Texecom Veritas Bedienungsanleitung

Texecom

Texecom PREMIER 640 Bedienungsanleitung

Texecom

Texecom Speech Dialler Bedienungsanleitung

Texecom

Texecom Premier Elite Ricochet Kits Bedienungsanleitung

Texecom

Texecom Premier Elite 8XP-W Bedienungsanleitung

Texecom

Texecom Premier Elite XT-W Bedienungsanleitung

Texecom

Texecom Premier 412 Betriebsanleitung

Texecom

Texecom Premier Elite iProx Bedienungsanleitung

Texecom

Texecom Veritas Excel Master Bedienungsanleitung

Texecom

Texecom Premier Elite Impaq Contact-W Bedienungsanleitung

Texecom

Texecom Ricochet Impaq Contact-W Bedienungsanleitung

Texecom

Texecom PrestigeCompact IR Bedienungsanleitung

Texecom

Texecom Premier Elite Series Bedienungsanleitung

Texecom

Texecom PREMIER 48 Bedienungsanleitung

Texecom

Texecom Speech Dialler Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung