Texi Treccia Bedienungsanleitung
TEXI Treccia operation manual
Operaon manual
High speed interlock
sewing machine
Treccia
TEXI Treccia operation manual
TEXI Treccia operation manual
CONTENTS
1. IMPORTANT SAFETY INSTRUCTIONS ………………………………………………………….…….……………………..
2. LUBRICATION ………………………………………………………………………………………………….……..……..…...
3. HOW TO CHANGE OIL .................................................................................................................................................
4. HOW TO CHANGE OIL FILTER ....................................................................................................................................
5. LUBRICATE AND COOLING OF NEEDLES AND THREADS …………………………………………….……....…...……
6. HOW TO REPLACE THE NEEDLES …………………………………………………………………………………..……….
7. THREADING …………………………………………………………………………………………………………….….……..
8. ADJUSTING THREAD TENSION …………………………………………………………………………………...…….………
9. ADJUSTING NEEDLE THREAD TAKE-UP ……………………………………………………………………...…….………
10. ADJUSTING SPREADER THREAD TAKE-UP ……………………………………………………….……….……....……..
11. ADJUSTING PRESSER FOOT ....................................................................................................................................
12. ADJUSTING STITCH LENGTH ...................................................................................................................................
13. ADJUSTING DIFFERENTIAL FEED RATIO ................................................................................................................
14. ADJSUTING THE PRESSURE OF PRESSER FOOT .................................................................................................
15. THREADING DIAGRAM ...............................................................................................................................................
16. CONVERSION CHART ................................................................................................................................................
2
3
3
3
3
3
4
4
4
4
4
5
5
5
6
6
2
TEXI Treccia operation manual
1. IMPORT SAFETY INSTRUCTIONS
1. Transportation
(1). The machine packed with machine cover.
(2). Put the machine into a carton.
(3). Use a cart or two men's hands to move it.
2. Storage
(1). Use duster-cover to cover the machine when it doesn’t work.
(2). Avoid to storage the machine in the temperature more than 45°C
3. Working
The machine doesn’t work over 40°C.
4. Warning
1) Pay attention to this warning advice as follow
a. Working area is dangerous.
b. Never touch the needle if the machine is still running.
c. Be Careful if you feed fabric.
d. Do not insert your finger between needle and roller for transportation on fabric.
2) Pay attention to the warning sticker
a. Movable parts must be enclosed was guard when you operate.
b. Put out the plug from socket when you adjust thread.
3
TEXI Treccia operation manual
2. LUBRICATION
1. Please oil with TERESSTIC T32 oil or its equivalent.
2. The lubricating oil has been drained from the machine before delivery. Remove screw (A), and fill the oil until the oil level
reaches between lines H and L of oil level gauge (Fig. 3, 4).
3. Be sure to check every day and refill the oil, if oil level is lower than line L of oil level gauge. When you begin operating the
machine, please check whether all the lubricating system is at normal condition.
3. HOW TO CHANGE OIL
1. Loosen Screw (1), drain all the oil from the tank, then fasten the screw (Fig. 5).
2. For extending life of the machine, change oil after the initial 4-week operation. After that, change oil every four months.
4. HOW TO CHANGE OIL FILTER
This machine is equipped with an oil filter, and the filter must be cleaned every mouth, replace the filter if necessary (Fig. 6).
* Before starting a brand-new machine or a machine which has not been used for more than a couple of week oiling
the needle bar.
5. LUBRICATE AND COOLING OF NEEDLES AND THREADS
Fill reservoir (1) and(2) with silicone oil to prevent the thread from breaking (Fig. 7).
6. HOW TO REPLACE THE NEEDLES
1. See specifications of the needles.
2. Loosen Screw (1), then pull out the used needles.
Insert the new needles into the holder holes as far as they can go,
and let the long groove of the needle face you (Fig. 8).
3. Fasten Screw (1).
Needle system: UY 128 GAS
4
TEXI Treccia operation manual
7. THREADING
Follow the procedures shown in (Fig. 9) for threading. Wrong threading may cause thread breaking, skipping stitch, puckering
or unexpected sewing.
8. ADJUSTING THREAD TENSION
The tension of the thread should be adjusted according to:
1. The material and the thickness of the fabric being sewed;
2. The thread;
3. The needle gauge.
If you turn thread tension knob clockwise, thread will be tighter (Fig. 10).
If you turn it counter-clockwise. It will tie looser.
9. ADJUSTING NEEDLE THREAD TAKE-UP
1. When the needle bar is in the lowest position, the top edge of the Needle Thread Take-up should remain horizontal .
To adjust the position of the Take-up, loosen the Screw (4) first (Fig. 11).
2. Loosen Screw (2)and adjust the length between point A and B to about 75mm,then fasten Screw (2) tightly.
Note: To loosen the Needle Thread, turn the Needle Thread Take Up (3) toward the left. To tighten turn it toward the right.
3. Do not move the Spreader Thread Take-up (5) when making above adjustments.
10. ADJUSTING SPREADER THREAD TAKE-UP
1. When the Spreader Thread Take-up (1) is adjusted to the top, the small hole (A) of the other Spreader Thread Take-up
must be at the same level with the long Groove of the Spreader Thread.
2. To adjust, loosen Screw (3) and (4), and move the Spreader Thread Take-up (2) up or down, and then tighten screw again.
11. ADJUSTING PRESSER FOOT
Loosen Screw (1) and adjust Presser Foot (2) left and right to a proper position to let the needle may get into the center of
Presser Foot ‘s eyelet. After adjusting, tighten screw (1). (Fig. 13)
5
TEXI Treccia operation manual
12. ADJUSTING STITCH LENGTH
Stitch length can be adjusted variably in range from 1.2 mm - 4.0 mm, or 6 - 18 stitches per inch.
1. Keep pressing the push button (A) with your left hand, then turn the hand-wheel with your right hand until your left hand
finger feels the push button lock in (Fig. 14).
2. Keep turning hand-wheel for an inquired stitch length, whose scale indicated on the hand-wheel must be aligned with, then
stop pressing the button (Fig. 15).
3. Rotate the hand-wheel counter clock-wide to increase the stitch length, and clockwise to decrease.
4. After adjusting stitch length the differential ratio will usually be changed too. So adjustment of differential ratio is required.
13. ADJUSTING DIFFERENTIAL FEED RATIO
The differential Feed Ratio of this machine is adjustable from 1:0.5 to 1:1.3 (Fig. 16).
To adjust the ratio, loosen the nut (2), move the indicator (1) up or down.
* To stitch the cloth, move the indicator (1) upward;
* To gather the cloth, move the indicator (1) upward;
14. ADJUSTING THE PRESSURE OF PRESSER FOOT
Pressure of the Presser Foot should be as light as possible, so that cloth can be fed and sewed smoothly.
6
TEXI Treccia operation manual
15. THREADING DIAGRAM
16. CONVERSION CHART
MODEL NEEDLE
CLAMP
NEEDLE
PLATE
MAIN
FEED
DOG
KIFF
FEED
DOG
PRESSER
FOOT
SPREAD-
ER LOOPER NEEDLE
TEXI TRECCIA 10011295 10011337 10011725 10011736 10014315
10011662 10012780 UY 128
GAS
OPTIONAL
GAUGE 6.4 MM 10011863 10011906 10011725 10011736 10014105
7
TEXI Treccia operation manual
Notes
8
TEXI Treccia operation manual
CE DECLARATION OF CONFORMITY
Distributor:
Strima Sp. z o.o.
Swadzim, ul. Poznańska 54
62-080 Tarnowo Podgórne, Poland
We declare, that the following product:
High speed interlock sewing machine
model Treccia
(ZJ1500-156M-BD)
With this declaration relates, complies with following directives:
Machine directive 2006/42/EC
Low voltage directive 2006/95/EC
Harmonized norm used: EN 60204-1
Andere Handbücher für Treccia
1
Inhaltsverzeichnis
Andere Texi Nähmaschine Handbücher
Texi
Texi Tronic 7 NF Bedienungsanleitung
Texi
Texi O Bedienungsanleitung
Texi
Texi Integra 5 Bedienungsanleitung
Texi
Texi Catenaccio Bedienungsanleitung
Texi
Texi Joy 25 Bedienungsanleitung
Texi
Texi Black&White Bedienungsanleitung
Texi
Texi Post DD Bedienungsanleitung
Texi
Texi Ziggy Bedienungsanleitung
Texi
Texi Fox 25 Bedienungsanleitung
Texi
Texi Catenaccio Bedienungsanleitung
Texi
Texi Tronic 3 NEO Bedienungsanleitung
Texi
Texi Tronic 1 Bedienungsanleitung
Texi
Texi joy 48 Bedienungsanleitung
Texi
Texi Ballerina Bedienungsanleitung
Texi
Texi 1501 TS PREMIUM Bedienungsanleitung
Texi
Texi Tronic 1 NEO Bedienungsanleitung
Texi
Texi ART AUTO Bedienungsanleitung
Texi
Texi Tutu Bedienungsanleitung
Texi
Texi Tre 04 T Bedienungsanleitung
Texi
Texi Art Auto 2 Bedienungsanleitung
