IV
USING THE PRODUCT SAFELY
CAUTION
Input/output terminal
Maximum input to the input terminals is specified to prevent the
product from being damaged.
Do not supply input, exceeding the specifications that are indicated
in the "Rating" or "Caution on use" column in this manual of the
product. Otherwise, a product failure is caused.
Also, do not supply power to the output terminals from the outside.
Otherwise, a product failure is caused.
When the product is left unused for a long time
Be sure to remove the power plug from the outlet.
Calibration
Although the performance and specifications of the product are
checked under strict quality control during shipment from the factory,
they may slightly change because of secular changes in its parts. It
is recommended to periodically calibrate the product so that it is used
with its performance and specifications stable. For consultation
about the product calibration, call the distributor or the company
where you bought the product.
Daily maintenance
When you clean off the dirt of the product covers, panels, and knobs,
avoid solvents such as thinner and benzene. Otherwise, paint may
peel off or the resin surface may be affected.
To wipe off the covers, panels, and knobs, use a soft cloth with
neutral detergent in it.
During cleaning, be careful that water, detergents, and other foreign
matters do not get into the product.
If a liquid or metal gets into the product, an electric shock and fire are
caused. During cleaning, remove the power cord plug from the outlet.
Use the product correctly and safely, observing the above warning and
caution items.
Because this manual indicates caution items even in individual items,
observe those caution items to correctly use the product.
If you have questions or comments about the content of this manual,
call the company or our distributor.
