Textron STAMPEDE 900 Bedienungsanleitung
TEXTRON STAMPEDE 900
PLOW MOUNT
Plow Mount PART # 105815
Hardware Kit: HK-173
Kit Components:
INSTALLATION INSTRUCTIONS:
Note: Make sure all of the hardware needed to complete this
mount are in the package. Read through and understand the
instructions before installing.
1. Remove the two bolts (A) and four bolts (B) from
the factory holes in the bottom of the front lower
bumper plate. Shown in Figure 2.
2. Line the clips (C) with the OEM holes on the skid
plate (D). Shown on Figure 3.
3. Set the skid plate (D) on the the plow mount (1)
Shown on Figure 3.
4. Place the mount assembly back up to the bumper
and re-attach it using the four included ange bolts
(3). Shown in Figure 4.
Item # Qty. Description
1 1 Plow Mount
2 1 Spacer Plate
3 4 M10-1.50 X 35mm Hex Flange Bolt
4 2 M10-1.50 X 60mm Hex Flange Bolt
©2016 Copyright Kappers Fabricating, Inc. All rights reserved
Figure 1
1
3
4x
4
2x
2
AFigure 2
B
D
Figure 3
C
D
1
Figure 4
3
©2016 Copyright Kappers Fabricating, Inc. All rights reserved
Figure 5
Figure 6
1
4
1
5. Set the spacer plate (2) between the frame of the
machine and the mount (1). Shown in Figure 6.
6. Bolt the rear of the plow mount (1) up to the frame
into the OEM holes usings the two bolts (4). Shown
in Figures 5 & 6.
7. Tighten all hardware down.
8. See ATV Plow Tube System instruction manual for
tube attachment.
D
2
4
Inhaltsverzeichnis
Andere Textron Rack & Stand Handbücher
Beliebte Rack & Stand Handbücher anderer Marken
Salamander
Salamander Acadia AC/W/L400/WH Bedienungsanleitung
Fohhn
Fohhn VAT-09 Benutzerhandbuch
ricoo
ricoo FS0522 Bedienungsanleitung
AMSOIL
AMSOIL BMK-22 Kurzanleitung
Kargo Master
Kargo Master 48220 Bedienungsanleitung
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung
