Thor Broadcast H-IP-HDMI Bedienungsanleitung

User Manual

4K HEVC IP and USB HD Video Decoder

IP Stream Input HDMI Output

H-IP-HDMI

Tel: (800) 521-8467 Email: sal[email protected]om http://www.thorbroadcast.com 2

A Note from Thor Broadcast about this Manual

Intended Audience

This user manual has been written to help people who have to use,

integrate and to install the product. Some chapters require some

prerequisite knowledge in electronics and especially in broadcast

technologies and standards.

Disclaimer

No part of this document may be reproduced in any form without the

written permission of Thor Broadcast.

The contents of this document are subject to revision without notice due

to continued progress in methodology, design and manufacturing. Thor

shall have no liability for any error or damage of any kind resulting from

the use of this document.

Copy Warning

This document includes some confidential information. Its usage is

limited to the owners of the product that it is relevant to. It cannot be

copied, modified, or translated in another language without prior written

authorization from Thor Broadcast.

H-IP-HDMI

Tel: (800) 521-8467 Email: sal[email protected]om http://www.thorbroadcast.com 3

SAFETY INSTRUCTIONS

CONNECTING TO THE POWER SUPPLY

This product has to be connected to the power supply.

Before carrying out maintenance operation or modification of the installation, the

Device has to be disconnected.

OVERVOLTAGE

An over-voltage cause short-circuits or fire. Never overload the power lines. Always use

the 12VDC power supply provided for single channel series.

LIQUIDS

Keep the unit protected from liquids;

Do not place objects filled with liquids on it;

If any liquid should accidentally fall into the cabinet, disconnect the power plug.

CLEANING

Disconnect the module before cleaning. Use only a humid cloth without solvent.

VENTILATION

Ventilation holes should not be obstructed;

Not be installed in a hermetically sealed environment;

Other electronic products or heat producing items keep a minimum distance of 15

cm around the apparatus for sufficient ventilation;

ACCESSORIES

Only use the supplied power adaptor;

The use of accessories not manufactured by the manufacturer can cause damage to the module.

INSTALLATION OF THE MODULE

Do not expose the unit to rain or moisture;

Do not installed in direct sunlight or in humid place;

Respect the minimum and maximum temperature specifications

In The Box

IP Decoder

1pc

16GB SD Card

1pc

Power Adapter

1pc

User Manual

1pc

H-IP-HDMI

Tel: (800) 521-8467 Email: sal[email protected]om http://www.thorbroadcast.com 4

GENERAL DESCRIPTION

The Decoder can bring IP streaming, USB storage to any HDMI devices and also playback

your multimedia files to come from FTP server. The H-IP-HDMI can be widely used in

broadcasting, Hotel TV systems, advertising signage etc.

APPLICATION DIAGRAM

Cloud Media

FTP Server

LAN

Network

IP camera

UDP

HTTP

RTP

RTSP

Unitcast

Rtmp

Multicast

Hls(m3u8)

You Tube Live

USB drive

IP IN

SD card

HDMI

NMS Control

IP IN

Router or Switch

HD Monitor Encoder Modulator

HD TV

H-IP-HDMI

Tel: (800) 521-8467 Email: sal[email protected]om http://www.thorbroadcast.com 5

KEY FEATURES

■HEVC/H.265/H.264/MPEG-2 decoder

■Resolution up to 1920x1080 @60fps, 3840x2160 @30fps

■Multiple network streaming protocols

■Local media player

■USB playback

SPECIFICATIONS

Interface

Input

RJ45x2 10/100 Base-T (1x Management, 1x

Streaming)

USB2.0-(FAT32)

Micro SD-Delivered 16GB USB flash

Output

HDMI*1

Video Decoding

Resolution

Max. up to 1920x1080 @60fps, 3840x2160 @30fps

Protocol

IPv4/v6, TCP, UDP, HTTP, HLS, RTP, RTSP,RTMP,

FTP, IGMP(Multicast)

Media formats

MPEG-TS, MPEG4, AVI, MOV, MPEG

Audio Decoding

Format

Mpeg1L2, MP3, AAC-LC, HE-AAC, WMA

Sample rate

32/44.1/48KHz

System

Management

Web NMS –IP 192.168.0.168

Language

English

Security

Password protection, IP address filtering

General

Power supply

12V DC

Dimensions

180 x 105 x 34 mm

Weight

270g

H-IP-HDMI

Tel: (800) 521-8467 Email: sal[email protected]om http://www.thorbroadcast.com 6

APPEARANCE INTRODUCTION

CONNECTION DIAGRAM

Typical Connection

1. The HDMI connector is connected directly to a monitor.

2. Check if the provided SD Card is connected to the Micro SD slot.

3. Then connect the supplied connector to the DC 12V socket.

4. The connection to an FTP server is established via the network

connection. The connection can be local or via the Internet.

Remark

[1] Do not remove the SD card. (Format:FAT32)

Internet

RJ45

HDMI

SD Must had SD Card

Power DC 12V

RJ45

NMS Control

Default IP:

192.168.0.168

1. USB Port

2. SD Card Port

3. IP Data Port

4. HDMI Output

5. Power & Status LED

6. Factory Reset Button

7. NMS control Port

8. Power Input

3 4 5 6 7 8

H-IP-HDMI

Tel: (800) 521-8467 Email: sal[email protected]om http://www.thorbroadcast.com 7

UDP Server Connection

Decoder and computer are connected to the same network(switch). The UDP settings, description

as the “UDP server streaming”.

Router

Video Encoder

GIGA Switch

UDP Server

Internet

URL:239.1.1.1

RJ45

Port:1234

IP:192.168.2.1

RJ45 Data

HDMI Input

IP: Data 192.168.2.5

Video Decoder

STB

HDMI Output

RJ45

RJ45 NMS

IP:192.168.2.6

IP: 192.168.2.7

Decoder and computer point to point Connection. Decoder’s default IP is 192.168.0.168,

make sure the computer’s IP is on the same IP segment. The UDP settings, description as the

“UDP server streaming”.

Router

Video Encoder

UDP Server

GIGA Switch

Internet

RJ45

URL:239.1.1.1

IP:192.168.2.1

RJ45 Data

IP:192.168.2.10

Port:1234

HDMI Input

IP: Data 192.168.2.5

Video Decoder

STB

HDMI Output

RJ45 NMS

IP:192.168.0.168

TV IP NB:192.168.0.5

H-IP-HDMI

Tel: (800) 521-8467 Email: sal[email protected]om http://www.thorbroadcast.com 8

OPERATION INSTRUCTION

The device is configured using NMS. Access to the NMS is via the network connection.

FTP configuration and system settings are performed.

1. IP Address of Computer Setting

The IP Address of the computer must be in the same participation as the IP Address of

the IP Video Decoder.

System Control>Network Connections>LAN Connection>Properties>Internet Protocol

Version 4 TCP/IPv4 (or Version6 TCP/IPv6)>Properties>Use the following IP address:

IP address Computer:192.168.0.20 and Subnet mask:255.255.255.0.

2. NMS Log in

If you want to operate decoder, please

Default IP is 192.168.0.168;

Username: admin Password: admin

3.NMS Home Page

Contents of the home page includes :Status/Media Source/Setting/Update/Log out.

H-IP-HDMI

Tel: (800) 521-8467 Email: sal[email protected]om http://www.thorbroadcast.com 9

Status

Here you can know the NMS FW version,

System FW version, IP information,

current playback source.

Click “Status” label and click the “ Refresh

”button to read the current status.

Media Source Settings

1. IP streaming

Click IP Streaming item in Media Source.

Enter your URL of Network streaming in the Full URL field.

(ex. UDP://@239.1.1.1: 3990)

(ex. RTP://@239.1.1.1: 3990)

(ex. RTSP://192.168.1.100:8554/1.mp4)

(ex.rtmp://202.69.69.180:443/webcast/bshdlive-pc)

(ex.http://125.12.7.172:9981/stream/channelid/086640851)

H-IP-HDMI

Tel: (800) 521-8467 Email: sal[email protected]om http://www.thorbroadcast.com 10

(ex. http://ivi.bupt.edu.cn/hls/cctv1hd.m3u8)

(ex. https://www.youtube.com/watch?v=cSUtWVFaG4I)

Click the “Apply” button to start playing.

Remark:

You can enter the URL of the network stream such as RTSP, RTMP, Http, etc.

2. M3U Playlist

Click M3U Playlist item in Media Source,

then click the “Choose file” button to select

your m3u or m3u8 file.

It will list from which you can select a

network streaming file. Click the program

that you want to start playing.

Remark :

Current implementation of playlist.

(m3u) is intended for live stream

selection only. Continuous file playback

with m3u file will be added later.

Settings

Setting Page including Network Setting/Log in Password Changed.

1.NMS Network Setting

The Default IP of NMS is 192.168.0.168. In

the IP Address/Subnet Mask/Default

Gateway /MAC Address field,enter the IP

address/ Subnet Mask/Gateway/MAC

Address you want to change.

Click “Apply” button and wait a moment, it will

change to the IP information of your choice.

Inhaltsverzeichnis

Andere Thor Broadcast Medienkonverter Handbücher

Thor Broadcast

Thor Broadcast H-H.264IP-E Bedienungsanleitung

Thor Broadcast

Thor Broadcast H-HDPerformux- 8 Bedienungsanleitung

Thor Broadcast

Thor Broadcast Thor Fiber HD-IRD-V3-ATSC-DVBS2 Bedienungsanleitung

Thor Broadcast

Thor Broadcast H-IRD-V3 Bedienungsanleitung

Thor Broadcast

Thor Broadcast H-4HD-EMS Bedienungsanleitung

Thor Broadcast

Thor Broadcast H-12HDMI-QAM-IPLL Bedienungsanleitung

Thor Broadcast

Thor Broadcast H-H.264IP-E Bedienungsanleitung

Thor Broadcast

Thor Broadcast H-MPEG2-H264-E2 Bedienungsanleitung

Thor Broadcast

Thor Broadcast H-IRD-V4 Bedienungsanleitung

Thor Broadcast

Thor Broadcast H-4HD-EMH Bedienungsanleitung

Thor Broadcast

Thor Broadcast H-1SDI-QAM-IPLL Bedienungsanleitung

Beliebte Medienkonverter Handbücher anderer Marken

SoundTraxx

SoundTraxx Blunami BLU-2200 Bedienungsanleitung

SPROLINK

SPROLINK VA1 Bedienungsanleitung

Acclaim Lighting

Acclaim Lighting DDC-1-AC Bedienungsanleitung

Nikon

Nikon AF-S TC-20E III Bedienungsanleitung

Axis

Axis AXIS Q7406 Bedienungsanleitung

Omega

Omega TAC80B-J Bedienungsanleitung

Zoom

Zoom Thunderbolt TAC-2R Bedienungsanleitung

OST

OST iConverter 10/100M Bedienungsanleitung

Vertiv

Vertiv Netsure Bedienungsanleitung

birddog

birddog MINI Bedienungsanleitung

Roland

Roland GI-10 Bedienungsanleitung

Wallenstein

Wallenstein WX310 Bedienungsanleitung

Pace

Pace MSS 200-1 Bedienungsanleitung

Solar Converters

Solar Converters EQ 12/24-50 Bedienungsanleitung

CYP

CYP EL-7400V Bedienungsanleitung

TIE

TIE MIDI 1i1o Bedienungsanleitung

DCS

DCS Vivaldi Upsampler Bedienungsanleitung

Westermo

Westermo MCW-211 SERIES Bedienungsanleitung