Thrane&Thrane TT-6007A Bedienungsanleitung
TT-6006A and TT-6007A
Message terminal
INSTALLATION MANUAL
TT-6006AandTT-6007A
Message Terminal
Installation manual
Document number: 98-130088-B
Release date: March 16, 2010
Disclaimer
Any responsibility or liability for loss or damage in connection with the use of this
product and the accompanying documentation is disclaimed by Thrane & Thrane. The
information in this manual is provided for information purposes only, is subject to
change without notice and may contain errors or inaccuracies. Manuals issued by
Thrane & Thrane are periodically revised and updated. Anyone relying on this
information should acquire the most current version e.g. from http://www.thrane.com or
from the distributor.Thrane & Thrane is not responsible for the content or accuracy of
any translations or reproductions, in whole or in part, of this manual from any other
source.
Copyright
© 2010 Thrane & Thrane A/S. All rights reserved.
Trademark Acknowledgements
•Thrane & Thrane is a registered trademark of Thrane & Thrane A/S in the European
Union and the United States.
•Inmarsat is a registered trademark of the International Maritime Satellite
Organisation (IMSO) and is licensed by IMSO to Inmarsat Limited and Inmarsat
Ventures plc.
• Other product and company names mentioned in this manual may be trademarks or
trade names of their respective owners.
iii
Safety summary 1
The following general safety precautions must be observed during all
phases of operation, service and repair of this equipment. Failure to comply
with these precautions or with specific warnings elsewhere in this manual
violates safety standards of design, manufacture and intended use of the
equipment. Thrane & Thrane assumes no liability for the customer's failure
to comply with these requirements.
GROUND THE EQUIPMENT
To minimise shock hazard, the equipment chassis and cabinet must be
connected to an electrical ground and the cable instructions must be
followed.
DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE
Do not operate the equipment in the presence of flammable gases or fumes.
Operation of any electrical equipment in such an environment constitutes a
definite safety hazard.
KEEP AWAY FROM LIVE CIRCUITS
Operating personnel must not remove equipment covers. Component
replacement and internal adjustment must be made by qualified
maintenance personnel.
DO NOT SUBSTITUTE PARTS OR MODIFY EQUIPMENT
Because of the danger of introducing additional hazards, do not substitute
parts or perform any unauthorized modification to the equipment.
COMPASS SAFE DISTANCE
Minimum safety distance: 1 m from the Message Terminal
Failure to comply with the rules above will void the warranty!
iv
About the manual 2
Intended readers
This manual is an installation manual for the Message Terminal.
The manual is intended for installers of the Message Terminal and
service personnel. Personnel installing or servicing the system
must be properly trained and authorized by Thrane & Thrane. It is
important that you observe all safety requirements listed in the
beginning of this manual, and install the system according to the
guidelines in this manual.
Manual overview
Note that this manual does not cover how to use the system. For
information on usage refer to the user manual for the system in
which you are using the Message Terminal.
This manual has the following chapters:
•Installation gives an introduction to the two types of Message
Terminal, explains how to mount the units and gives guidelines
for storage and repacking for shipment.
•Connectors and controls shows outline and pin-out for all
connectors on the Message Terminal and explains the
functions of the buttons in the front panel.
v
Table of Contents
Chapter 1 Installation
In this chapter .................................................................... 1
The Message Terminal .......................................................2
Initial inspection ................................................................4
Installation .........................................................................5
Storage ..............................................................................7
Repacking for shipment .....................................................7
Chapter 2 Connectors and controls
In this chapter ....................................................................9
Connectors ....................................................................... 10
Buttons in the front panel ................................................23
App. A Specifications
In this chapter ..................................................................25
General specifications ......................................................25
App. B Mechanical outlines
In this chapter .................................................................. 27
Outline drawing: Bottom, front and top ............................28
Outline drawing: Rear ......................................................29
Outline drawing: Side and perspective view .....................30
Outline drawing: Flush mount plate ..................................31
Outline drawing: Cable Relief Plate ..................................32
Table of Contents
vi
Glossary .........................................................................................33
Index .........................................................................................37
1
Chapter 1
1111
Installation
Installation 1
In this chapter
This chapter provides a short description of the two types of Message
Terminal, including descriptions of:
•The Message Terminal
•Initial inspection
•Installation
•Storage and
•Repacking for shipment
Chapter 1: Installation
2TheMessageTerminal
The Message Terminal
GMDSS or general purpose terminal
There are two variants of the Message Terminal: The TT-6006A and the
TT-6007A. The only visible difference is the Distress button on the TT-6006A,
which is a GMDSS approved terminal. The next sections describe the two
terminals.
TT-6006A
The TT-6006A Message Terminal is a maritime terminal for use in GMDSS
installations, providing several types of interfaces for connection to external
equipment, such as a Mini-C transceiver, MF/HF Radio Telex applications and
an Alarm panel. The Message Terminal has a touch-screen for operating the
terminal. However, in GMDSS installations a keyboard is mandatory. A
suitable keyboard is available from Thrane & Thrane.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Thrane&Thrane Touch-Terminal Handbücher
Thrane&Thrane
Thrane&Thrane TT-3000LRIT mini-C Bedienungsanleitung
Thrane&Thrane
Thrane&Thrane TT-3710A EXPLORER 500 Bedienungsanleitung
Thrane&Thrane
Thrane&Thrane Explorer 727 Bedienungsanleitung
Thrane&Thrane
Thrane&Thrane BGAN Thrane&Thrane Explorer 700 Bedienungsanleitung
Thrane&Thrane
Thrane&Thrane Explorer 300 Bedienungsanleitung
Thrane&Thrane
Thrane&Thrane Explorer 300 Bedienungsanleitung
Thrane&Thrane
Thrane&Thrane Sailor 250 FleetBroadband Bedienungsanleitung
Thrane&Thrane
Thrane&Thrane EXPLORER 122 Bedienungsanleitung
Thrane&Thrane
Thrane&Thrane TT-3606E Handbuch
Thrane&Thrane
Thrane&Thrane EXPLORER 500 Bedienungsanleitung
Beliebte Touch-Terminal Handbücher anderer Marken
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung
Ingenico
Ingenico AXIUM EX4000 Bedienungsanleitung
Heisei Electronics
Heisei Electronics Q-POS 815 Bedienungsanleitung
Amano
Amano MTX-15 Bedienungsanleitung
FLOWBIRD
FLOWBIRD CWT Compact Touch Bedienungsanleitung
Demco
Demco SP7 Bedienungsanleitung
Motorola
Motorola MTP850 Bedienungsanleitung
YASKAWA
YASKAWA 62H-MDC0 Bedienungsanleitung
MVG industries
MVG industries NeptuLink Bedienungsanleitung
Price Industries Limited
Price Industries Limited FDC Gebrauchsanweisung
Honeywell
Honeywell TemaKey Bedienungsanleitung
EBN
EBN BPC65-B-A16G Bedienungsanleitung