Thrustmaster T3PM Bedienungsanleitung

Europe, Middle East

ENGLISH

FRANÇAIS

DEUTSCH

NEDERLANDS

ITALIANO

ESPAÑOL

PORTUGUÊS

РУССКИЙ

ČESTINA

TÜRKÇE

POLSKI

SVENSKA

SUOMI

SLOVENCINA

MAGYAR NYELV

תירבע

ﺔﻴﺑﺮﻌﻟا

North America/

Norteamérica

ENGLISH

FRANÇAIS

ESPAÑOL

Latin America/

América Latina

ENGLISH

ESPAÑOL

PORTUGUÊS

Asia Pacic

日本語

繁體中文

한국어

ENGLISH

1/12

2/12

TECHNICAL FEATURES

1Pedal set

2Additional hard spring (black)

32.5 mm Allen key

4Spring retaining rod

5Upper retaining head with washer

6Elastomer cushioning ring (white – Shore 70)

7Upper plastic spacer (red)

8Soft spring (silver – installed by default)

9Lower plastic spacer (red)

3/12

WARNING

Before using this product, please read this manual carefully and save it for later reference.

For safety reasons, never use the pedal set with bare feet

or while wearing only socks on your feet.

THRUSTMASTER®DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF

INJURY RESULTING FROM USE OF THE PEDAL SET WITHOUT SHOES.

Warning – Pedal set pinch hazard when playing

* Keep the pedal set out of children’s reach.

* During gameplay, never place your fingers on or anywhere near the sides of the pedals.

* During gameplay, never place your fingers on or anywhere near the pedal’s rear base.

* During gameplay, never place your fingers on or anywhere near the pedal’s front base.

NEVER

4/12

AUTOMATIC CALIBRATION OF THE PEDAL SET

IMPORTANT

- Never connect or disconnect the pedal set from the base of the wheel when the wheel is

connected to the console or PC, or during gaming sessions, to avoid calibration problems.

= Always connect the pedal set to the wheel before connecting the wheel to the console or PC.

- Once the racing wheel’s calibration is complete and the game has been started, the pedals are

automatically calibrated after a few presses.

- Never press the pedals during the racing wheel's self-calibration phase or while a game is loading!

This could result in improper calibration.

- If your racing wheel and/or pedal set do not function correctly, or if they seem to be improperly

calibrated: Power off your console or PC and completely disconnect the racing wheel. Then

reconnect all cables (including the power supply cable and the pedal set), and restart your console

or PC and your game.

5/12

ATTACHING THE PEDAL SET TO A SUPPORT OR COCKPIT

The pedal set can be attached to a variety of different compatible supports (sold separately) using

the five M6-type threaded holes located underneath the base. To do so, screw at least two M6

screws (not included) through the support shelf, and into the threaded holes on the underside of the

pedal set’s base.

Important: the length of the M6 screws must not exceed the thickness of your support by

more than 0.47 inches/12 mm, so as not to risk damaging the pedal set’s internal

components.

The pedal set’s setup diagrams for cockpits and other supports are available at

https://support.thrustmaster.com:click Racing Wheels / T3PM, and then Template - Cockpit

setup.

6/12

ADJUSTING THE PEDAL SET

Each of the three pedals includes:

- A pedal arm (10) with two perforations.

- A plastic head support (11) (placed between the head and the arm) with four perforations.

- A metal head (12) with multiple perforations (nine for the accelerator – six for the brake – six for

the clutch).

ATTENTION: To avoid any calibration problems, be sure to always disconnect your wheel’s

USB cable from the console or PC before making any adjustments to your pedal set.

Adjusting the HEIGHT of the gas pedal

- Using the included 2.5 mm Allen key (3), unscrew the two screws holding the metal head (12) and

its support (11) in place.

- Select your preferred height position, then replace and re-tighten the screws so that the metal

head (12) and its support (11) are held firmly in place.

Low position

High position (default)

7/12

Adjusting the SPACING of the three pedals

- Using the included 2.5 mm Allen key (3), unscrew the two screws holding the metal head (12) and

its support (11) in place.

- Select your preferred position (to the left, centered, or to the right), then replace and re-tighten the

screws so that the metal head (12) and its support (11) are held firmly in place.

Examples illustrating the brake pedal:

Left position Centered position

(default)

Right position

Number of possible spacing positions per pedal:

- Three for gas pedal

- Three for brake pedal

- Three for clutch pedal

Adjusting the INCLINATION of the pedals

- Using the included 2.5 mm Allen key (3), unscrew the two screws holding the metal head (12) and

its support (11) in place.

- Turn the plastic head support (11)180°, then replace and re-tighten the screws so that the metal

head (12) and its support (11) are held firmly in place.

Examples illustrating the gas pedal:

Less inclined position (default) More inclined position

Number of possible inclination positions per pedal:

- Two for gas pedal

- Two for brake pedal

- Two for clutch pedal

8/12

INCLUDED SET OF BRAKE SPRINGS

4 possible configurations and settings for the brake pressure force

This mod lets you experience a different feel and resistance when braking.

You can choose to install it or not, according to your preferences.

Brake resistance Soft

Medium

(by default)

Hard Very hard

Recommended use Desk Desk

Pedal set

support

Cockpit

Soft silver spring (8)

White elastomer cushioning

ring (6)

Hard black spring (2)

1. Pull hard on the lower plastic spacer (9) to compress the spring and remove the spring retaining

rod (4) from its location.

Method 1:

Method 2:

9/12

2. Reposition the different elements on the spring retaining rod (4).

Start with the lower plastic spacer (9), your choice of spring (2) or (8), and then the upper plastic

spacer (7).

3. After your selected configuration, install the elastomer cushioning ring (6).

4. Adjust the upper retaining head with washer (5) and position it in its location.

5. Strongly compress the spring in order to place the spring retaining rod (4) in its location

A video showing how to change the spring is available at https://support.thrustmaster.com: click

Racing Wheels/ T3PM.

Inhaltsverzeichnis

Sprachen:

Andere Thrustmaster Videospielzubehör Handbücher

Thrustmaster

Thrustmaster VIPER TQS Bedienungsanleitung

Thrustmaster

Thrustmaster Rechargeable Wireless Dual Trigger 2-in-1 Bedienungsanleitung

Thrustmaster

Thrustmaster NASCAR Pro Victory RF Bedienungsanleitung

Thrustmaster

Thrustmaster TSS HANDBRAKE Bedienungsanleitung

Thrustmaster

Thrustmaster T-x3 Battery Grip Bedienungsanleitung

Thrustmaster

Thrustmaster T300RS GT Edition Bedienungsanleitung

Thrustmaster

Thrustmaster TH8S Shifter Add-on Bedienungsanleitung

Thrustmaster

Thrustmaster T3PA-PRO Bedienungsanleitung

Thrustmaster

Thrustmaster MFD COUGAR PACK Bedienungsanleitung

Thrustmaster

Thrustmaster SimTask Steering Kit Bedienungsanleitung

Thrustmaster

Thrustmaster Formula Wheel Add-On Ferrari SF1000 Edition Bedienungsanleitung

Thrustmaster

Thrustmaster T128 Bedienungsanleitung

Thrustmaster

Thrustmaster TX racing wheel Bedienungsanleitung

Thrustmaster

Thrustmaster EPIC MICKEY PAINTBRUSH AND THINNER PROTECTION... Bedienungsanleitung

Thrustmaster

Thrustmaster RGT Force Feedback Pro Bedienungsanleitung

Thrustmaster

Thrustmaster FreeStyler Board Gebrauchsanweisung

Thrustmaster

Thrustmaster ferrari 458 spider Bedienungsanleitung

Thrustmaster

Thrustmaster TOP GUN FOX 2 PR FLIGHT STICK Gebrauchsanweisung

Thrustmaster

Thrustmaster T248 Bedienungsanleitung

Thrustmaster

Thrustmaster Enzo Ferrari 2-in-1 Bedienungsanleitung

Thrustmaster

Thrustmaster T300 Bedienungsanleitung

Thrustmaster

Thrustmaster TCA Yoke Pack Boeing Edition Bedienungsanleitung

Thrustmaster

Thrustmaster T80 Ferrari 488 GTB Edition Bedienungsanleitung

Thrustmaster

Thrustmaster T-GT II Bedienungsanleitung

Beliebte Videospielzubehör Handbücher anderer Marken

VENOM

VENOM VS3057 Bedienungsanleitung

LINK-MI

LINK-MI HDVC01 Bedienungsanleitung

Avermedia

Avermedia C875 Bedienungsanleitung

VENOM

VENOM VS2728 Bedienungsanleitung

DGT

DGT 960 Bedienungsanleitung

Sega

Sega Visual Memory Unit Bedienungsanleitung

Datel

Datel Go-tcha Expedition Bedienungsanleitung

TruGolf

TruGolf TruFlight 2 Bedienungsanleitung

CH Products

CH Products CH PRO THROTTLE Bedienungsanleitung

Cube Controls

Cube Controls Mercedes-AMG - GT Edition SIM Wheel Bedienungsanleitung

Hoffmann

Hoffmann Club Pro Bedienungsanleitung

ardistel

ardistel ADT SpeedRacer Bedienungsanleitung

Sven

Sven GC-W150 Bedienungsanleitung

Deltaco Gaming

Deltaco Gaming GAM-131 Bedienungsanleitung

Huffy

Huffy M731324 Bedienungsanleitung

Ace Bayou

Ace Bayou X Rocker Bedienungsanleitung

ButtKicker

ButtKicker BK-GR Bedienungsanleitung

Brook

Brook Sniper Bedienungsanleitung