Thuraya IP+ Bedienungsanleitung

QUICK SETUP GUIDE

Thuraya IP

Quick Setup Guide

www.thuraya.com

Quick Setup Guide

Setting up

1. Obtaining a GPS ﬁx

2. Connecting to the computer

3. Pointing to the satellite

4. Connecting to the network

Readiness

Prerequisites

1. Location readiness

2. Thuraya IP+ readiness

3. Computer readiness

Quick Setup Guide

Setting up

1. Obtaining a GPS ﬁx

2. Connecting to the computer

3. Pointing to the satellite

4. Connecting to the network

Readiness

Prerequisites

1. Location readiness

2. Thuraya IP+ readiness

3. Computer readiness

Location Readiness

Location with a clear line of sight is critical

Be aware of the location of the satellites.

Obtain a clear line of sight with the satellite.

Avoid obstruction of any objects in front of the

Thuraya IP+ terminal or the external antenna (if

used).

Though the Thuraya IP+ is a battery operated device,

please have enough power supply & sockets or power

extension ready, just in case.

Service available

Service possible

This map represents Thuraya ex pectations ofcoverage. Fo r furtherinformation, please contact Thuraya CustomerCare at customer.care@thuraya.com or visitwww.thuraya.com

/thurayatelecom

Thuraya Coverage Map

Thuraya IP+ Readiness

Appropriately provisioned and active SIM Card is vital

1 - Charge the Thuraya IP+ battery for 3 hours.

2 - Ensure the Thuraya IP+ has the latest ﬁrmware. Check

www.thuraya.com/product_upgrades/927 for the latest release.

3 - Power adapter and cable (included in package).

4 - Ethernet cable (included in package).

5 - Appropriately provisioned and active Thuraya IP+ SIM card to be inserted

into the SIM slot of the Thuraya IP+ terminal.

6 - Be aware of the details of the Thuraya IP+ terminal and the SIM Card (you

shall need these for any troubleshooting).

IMEI number of the Thuraya IP+ terminal

Firmware version

MSISDN and serial number of the SIM card

Thuraya IP+ Readiness

Appropriately provisioned and active SIM Card is vital

1 - Charge the Thuraya IP+ battery for 3 hours.

2 - Ensure the Thuraya IP+ has the latest ﬁrmware. Check

www.thuraya.com/product_upgrades/927 for the latest release.

3 - Power adapter and cable (included in package).

4 - Ethernet cable (included in package).

5 - Appropriately provisioned and active Thuraya IP+ SIM card to be inserted

into the SIM slot of the Thuraya IP+ terminal.

6 - Be aware of the details of the Thuraya IP+ terminal and the SIM Card (you

shall need these for any troubleshooting).

IMEI number of the Thuraya IP+ terminal

Firmware version

MSISDN and serial number of the SIM card

1 - Desktop PC/laptop with any standard internet browser and Java installed

2 - Ensure the proxy server settings in your browser are disabled

(If using Internet Explorer, select Tools > Internet Options > Connections > LAN

Settings and uncheck the box labeled ‘Use a proxy server for your LAN’).

3 - Disconnect any other active LAN connection on your PC

(Control Panel>Network and Dial-Up Connections>Local Area Network>Click on

Internet Protocol (TCP/IP)>Select ‘Obtain an IP address automatically’ and

‘Obtain DNS server address automatically’>OK).

Ensure that the browser is Java-enabled and the proxy settings

are disabled

Computer Readiness

Setting up – Step-by-Step Guide

Follow each step to obtain a ﬁx on the satellite and connect to the network

Obtaining a GPS ﬁx

Connecting to the computer

Pointing to the satellite

Connecting to the network

1 - Desktop PC/laptop with any standard internet browser and Java installed

2 - Ensure the proxy server settings in your browser are disabled

(If using Internet Explorer, select Tools > Internet Options > Connections > LAN

Settings and uncheck the box labeled ‘Use a proxy server for your LAN’).

3 - Disconnect any other active LAN connection on your PC

(Control Panel>Network and Dial-Up Connections>Local Area Network>Click on

Internet Protocol (TCP/IP)>Select ‘Obtain an IP address automatically’ and

‘Obtain DNS server address automatically’>OK).

Ensure that the browser is Java-enabled and the proxy settings

are disabled

Computer Readiness

Setting up – Step-by-Step Guide

Follow each step to obtain a ﬁx on the satellite and connect to the network

Obtaining a GPS ﬁx

Connecting to the computer

Pointing to the satellite

Connecting to the network

1 - Place the Thuraya IP+ terminal outside on a ﬂat surface with a clear view of the sky (avoid

buildings, trees and other objects that may cause obstruction).

2 - Power on the Thuraya IP+ terminal by pressing the power button.

3 - Thuraya IP+ will automatically attempt to locate itself using GPS. This may take up to ﬁve

minutes. The small GPS satellite icons on the display (shaded area in the illustration)

illustrate how many GPS satellites are in view at any given time. You need all three satellite

icons to be solid to obtain a GPS ﬁx.

If any of the GPS satellite icons are missing or ﬂashing, then the GPS signal is being

blocked. When the GPS icon stops ﬂashing, then the Thuraya IP+ terminal has successfully

updated the GPS position.

Step 1 - Obtaining a GPS Fix

Clear line of sight with no obstructions is essential to obtaining a GPS ﬁx

Step 2 - Connecting to the Computer

Connect Thuraya IP+ to a computer via Ethernet or WLAN

1 - Using Ethernet

Connect the Ethernet cable to your laptop’s network interface and

insert the other end of the cable into the Thuraya IP+ terminal as

illustrated.

2 - Using WLAN

Press and hold the WLAN button on the Thuraya IP+ terminal until the

WLAN icon is displayed.

Switch on Wi-Fi on your computer and refresh the “Available Wireless

Networks”. Once Thuraya IP+ is displayed, press “Connect” to Thuraya

IP+.

1 - Place the Thuraya IP+ terminal outside on a ﬂat surface with a clear view of the sky (avoid

buildings, trees and other objects that may cause obstruction).

2 - Power on the Thuraya IP+ terminal by pressing the power button.

3 - Thuraya IP+ will automatically attempt to locate itself using GPS. This may take up to ﬁve

minutes. The small GPS satellite icons on the display (shaded area in the illustration)

illustrate how many GPS satellites are in view at any given time. You need all three satellite

icons to be solid to obtain a GPS ﬁx.

If any of the GPS satellite icons are missing or ﬂashing, then the GPS signal is being

blocked. When the GPS icon stops ﬂashing, then the Thuraya IP+ terminal has successfully

updated the GPS position.

Step 1 - Obtaining a GPS Fix

Clear line of sight with no obstructions is essential to obtaining a GPS ﬁx

Step 2 - Connecting to the Computer

Connect Thuraya IP+ to a computer via Ethernet or WLAN

1 - Using Ethernet

Connect the Ethernet cable to your laptop’s network interface and

insert the other end of the cable into the Thuraya IP+ terminal as

illustrated.

2 - Using WLAN

Press and hold the WLAN button on the Thuraya IP+ terminal until the

WLAN icon is displayed.

Switch on Wi-Fi on your computer and refresh the “Available Wireless

Networks”. Once Thuraya IP+ is displayed, press “Connect” to Thuraya

IP+.

1 - Open the internet browser on your

laptop/computer and enter

http://192.168.128.100.

(Compass direction)

The above is displayed in the browser (wMMI).

Step 3 - Pointing to the Satellite

Location with a clear line of sight is critical for a successful setup

Step 3 - Pointing to the Satellite

Location with a clear line of sight is critical for a successful demo

2 - You must have a valid GPS location for the compass direction and antenna angle

to be displayed. If the GPS is not valid, go back to step 1 and allow Thuraya IP+ to

obtain GPS ﬁx.

3 - Observe the wMMI home page display and note the compass direction and

elevation for both the satellites in the “Satellite Location” section. The recommended

satellite for your location will be highlighted in green. With the Thuraya IP+ terminal

upside down, use the integrated compass to determine the

direction of the recommended satellite that will be highlighted in

green. You must be able to obtain a clear view of the satellite in

the sky for Thuraya IP+ to connect to the network. If the view to

the recommended satellite is obstructed from your location,

consider using the alternate satellite instead. If neither satellite

is accessible from your location, you will need to move to a

location that has visibility to at least one of the satellites.

Andere Handbücher für IP+

Inhaltsverzeichnis

Andere Thuraya Marine-GPS-System Handbücher

Thuraya

Thuraya XT I 01 Bedienungsanleitung

Thuraya

Thuraya ATLAS IP Bedienungsanleitung

Thuraya

Thuraya XT-PRO Bedienungsanleitung

Thuraya

Thuraya IP Commander Bedienungsanleitung

Thuraya

Thuraya SO-2510 Bedienungsanleitung

Thuraya

Thuraya XT Satellite Bedienungsanleitung

Thuraya

Thuraya XT-PRO Bedienungsanleitung

Thuraya

Thuraya XT-LITE Bedienungsanleitung

Thuraya

Thuraya seastar Kurzanleitung

Thuraya

Thuraya XT-LITE Bedienungsanleitung

Thuraya

Thuraya MarineStar Kurzanleitung

Thuraya

Thuraya XT-PRO Bedienungsanleitung

Thuraya

Thuraya XT-LITE Bedienungsanleitung

Thuraya

Thuraya SO-2510 Bedienungsanleitung

Thuraya

Thuraya SatSleeve Bedienungsanleitung

Thuraya

Thuraya ATLAS IP Bedienungsanleitung

Thuraya

Thuraya XT-PRO Bedienungsanleitung

Thuraya

Thuraya MarineStar MNB-01 Bedienungsanleitung

Thuraya

Thuraya ATLAS IP+ Bedienungsanleitung

Thuraya

Thuraya SatSleeve Hotspot Bedienungsanleitung

Thuraya

Thuraya MarineStar PSDD04102021 Bedienungsanleitung

Thuraya

Thuraya XT Bedienungsanleitung

Thuraya

Thuraya TU-2500 Bedienungsanleitung

Thuraya

Thuraya SF2500 Bedienungsanleitung

Beliebte Marine-GPS-System Handbücher anderer Marken

JRC

JRC JHS-183 Bedienungsanleitung

Furuno

Furuno GP-1610CF Bedienungsanleitung

Raytheon

Raytheon NautoPilot NP 5100 Bedienungsanleitung

Garmin

Garmin GPSMAP 8008 MFD Bedienungsanleitung

Furuno

Furuno GP-1650WDF Bedienungsanleitung

Iridium

Iridium Pilot Bedienungsanleitung

Beam

Beam Terra 800 Bedienungsanleitung

Sailmon

Sailmon E4 Bedienungsanleitung

AUTOHELM

AUTOHELM ST50 PLUS Bedienungsanleitung

ASTRO

ASTRO X-5 twin B Bedienungsanleitung

Garmin

Garmin GPS 16 Series Referenzhandbuch

Iridium

Iridium EXTREME Bedienungsanleitung

Satcube

Satcube Ku Bedienungsanleitung

Radio Zeeland DMP

Radio Zeeland DMP Sigma 120 Bedienungsanleitung

METRACKCO

METRACKCO SVT600/T1/T3 Bedienungsanleitung

Garmin

Garmin GPSMAP 190-01120-00 Bedienungsanleitung

Humminbird

Humminbird 532162-1_B Bedienungsanleitung

Garmin

Garmin GPSMAP 8500 Black Box Bedienungsanleitung