Tiger Lana Bedienungsanleitung

TIGER

LANA

LOG CABIN

GENERAL ASSEMBLY

INSTRUCTIONS

TIG/INS41

BEFORE YOU GET STARTED

PLEASE READ INSTRUCTIONS CAREFULLY

• Check the pack and make sure you have all the parts listed.

• When you are ready to start, make sure you have the right tools at hand (not supplied).

• Ensure there is plenty of space and a clean dry area for assembly.

TIMBER

As with all natural materials, mber can be aected during various weather condions. For the duraon of

heavy or extended periods of rain, swelling of the wood logs may occur. Warping of the wood may also occur

during excessive dry spells due to an interior moisture loss. Unfortunately, these processes cannot be avoided

but can be migated. It is suggested that the outdoor building is sprayed with water during extended periods of

warm sunshine and sheltered as much as possible during rain or snow.

Please do not paint or treat your cabin mbers before assembly as they must stay dry for a snug tongue and

groove t. To validate your guarantee and ensure longevity of the product, it is ESSENTIAL that your building is

treated with an appropriate high-quality oil or solvent based preservave AFTER assembly, both internally and

externally, then annually thereaer.

BUILDING A BASE

Care must be taken to ensure the product is placed on a suitable base. When thinking about where the building

and base is going to be constructed, ensure that there will be access to all sides for maintenance work and

annual treatment.

Ensure the base is rm and level and is built on rm ground, to prevent distoron.

The constructed base must be at least the size of tanalised oor bearers as referenced in supplied construct

diagram. It is also recommended that the oor be at least 25mm above the surrounding ground level to avoid

ooding.

TYPES OF BASE

• Durable plasc grid*.

• Concrete 75mm laid on top of 75mm hard-core.

• Slabs laid on 50mm of sharp sand.

• Timber base - Self constructed/Buy pre-made.

*We recommend a Fastt EcoBase for your building. It is durable, lightweight, exible, and easy to put in place.

Please see gersheds.com for details.

WOOD WARPING

MAY OCCUR

WINTER

EXPANSION

SUMMER

CONTRACTION

02 gersheds.com 0113 205 4189 sales@gersheds.com

PLASTIC BASE TIMBER BASE BROKEN SLABS BARE SOIL LOOSE GRAVELCONCRETE BASE SLAB BASE

Please retain instrucons for future reference

CAUTION:

All buildings should be erected

by two competent adults.

CAUTION:

It is advisable to wear safety

gloves during building installaon.

Whilst all products manufactured are made to the highest standards of safety, we cannot accept responsibility for your safety whilst erecng or

using this product.

GO WITH THE PRO!:

We understand how busy life can be. Our Pro-Installaon service can take the stress and strain out of assembling your

quality Tiger building for you. We recommend using professional and dedicated installers to erect your building. With their

knowledge and experience, they will ensure that your cabin is put properly in place ready for you to enjoy your space for

years to come.

If you have not booked our Pro-Installaon service and would like to arrange an installaon, please contact our friendly

customer support team on 0113 205 4189 (Mon – Fri 9am-5pm) or email sales@gersheds.com.

• The pro-install team will contact you to arrange a suitable me and date for the ng.

• Sit back, relax and let our professional home installaon service do all the hard work for you!

• Please view our Pro Installaon page on our website for full terms and condions.

MADE IN THE UK SINCE 1913.

We have been making our high quality,

great value garden buildings here in

Britain for decades.

BEFORE YOU GET STARTED

TOOLS REQUIRED

We recommend using the following tools (not supplied):

SCREWDRIVER +

Unpacking supplied cabin.

• Remove all wrapping from delivery. From top to boom, cut banding holding all components together and

remove the cabin components.

NOTE: PARTS MAY HAVE BECOME LOOSE OR MOVED DURING TRANSPORTATION.

• Lay components on a dry, horizontal surface.

RUBBER MALLET DRILL LADDER TAPE MEASURE SHARP KNIFE SPIRIT LEVELHAMMER

WOOD SAW

FIXING KIT CONTENTS:

SPANNER

04 gersheds.com 0113 205 4189 sales@gersheds.com

C20

Clout Nails (20mm Galvanised - QTY

300)

N40

Nails (40mm Galvanised - QTY 30)

N65

Nails (65mm Galvanised - QTY 300)

S40

Screws (40mm - QTY 30)

S60

Screws (60mm - QTY 8)

S80

Screws (80mm - QTY 16)

CB40

M6 Coach Bolts (40mm - QTY 8)

BA40

Nails (40mm Bright Annular - QTY 400)

Please retain instrucons for future reference

ASSEMBLY

• Assembly is straighorward if you follow these step-by-step instrucons.

• We recommend geng everything aligned properly before screwing together and that

screw holes should be pre-drilled to avoid spling the mber. (Do not come pre-drilled).

IMPORTANT

• Before assembly, please make sure you have a suitable base ready to erect your building on.

• Your base MUST be rm and level to ensure that the building is assembled properly and is square.

• Please carefully remove the packaging and unpack the components in your delivery.

NOTE: ADDITIONAL TIMBER MAY BE INCLUDED AS PACKING MATERIALS.

• DO NOT start your build unl you have checked that all the parts of your building are present and in a suitable condion.

• If you are organising a third party to install your building, it is best pracce not to schedule this immediately on receipt of

your order, to give you me to check your delivery.

BUILDING PACK CONTENTS:

For full details of what should be included please see the Product Construct Diagram and itemised cung list

that is supplied with the delivery. They are also available on request in pdf form from our helpful Customer

Support team – please call 0113 205 4189 or use the Items Delivered Query form at gersheds.com/contact.

TIGER LANA LOG CABIN GENERAL INSTRUCTIONS

Step 1:

UNPACKING CABIN COMPONENTS:

• Unpack all components from your supplied cabin pack(s) and place each individual component in the correct

order using the supplied construct diagram and parts list as a guide. Ensure all components are present and in

the correct posion before beginning assembly.

• Each log interlocks in a staggered paern.

NOTE: SOME LOGS FEATURE ADDITIONAL FULL NOTCHES & HALF NOTCHES.

• Before securing, ensure that the logs are ed properly in their respecve tongue and grooves, gently tapping

down with a mallet. (Detail A1 & A2)

TOP TIP

Use packing materials to protect when

tapping logs into place.

A1 A2

06 gersheds.com 0113 205 4189 sales@gersheds.com

Please retain instrucons for future reference

Step 2:

DOUBLE DOOR ASSEMBLY

• For cabins with double doors, build up door frame using the four door components provided.

Remove supplied key. This is usually stapled over keyhole.

• Arrange the door framing onto a rm and level surface, with hinges to the ground. Slot the door sill (base) then

the door head into place. Secure the 4 secons together through the joints using 1x S60 per corner. (Detail B)

NOTE: HOLES FOR FRAMING ARE PRE-DRILLED IN THE FACTORY.

NOTE: THIS IMAGE IS FOR ILLUSTRATIVE PURPOSES AND DOOR STYLE MAY DIFFER FROM YOUR

SUPPLIED PRODUCT.

DOOR HEAD

DOOR SILL (BASE)

S60

Step 3:

LAY DOWN TANALISED BEARERS

• Refer to the oor plan of your construct diagram, posion the tanalised bearers on prepared base.

• Spread out the tanalised bearers equally at approx. 400mm centres. (Detail C For Orientaon)

NOTE: ON LARGER CABINS, TANALISED BEARERS MAY BE SUPPLIED IN MORE THAN 1 PIECE.

PLEASE REFER TO YOUR CONSTRUCT DIAGRAM FOR THIS.

TIGER LANA LOG CABIN GENERAL INSTRUCTIONS

08 gersheds.com 0113 205 4189 sales@gersheds.com

Please retain instrucons for future reference

Step 4:

BEGIN BUILDING WALLS

• Place 1st layer of logs on the edges of the bearers. Ensure half logs are put down rst. See construct diagram

for build order.

• Use oorboard to mark o measuring point as shown.

• Measure to check the oor is square by measuring the points shown. If both measurements are the equal,

then your building is square. If not, manually adjust unl both measurements are equal.

• Screw logs into tanalised bearers using 3x S80 per log. (1x S80 in centre, 1x S80 per end notch)

• For xing through notches. (Detail D1)

• For xing through half log. (Detail D2 & D3)

• Check that oor is level using a spirit level.

D1 D2 D3

S80 S80 S80

4 3

FLOORBOARD

MEASURE POINT

TIGER LANA LOG CABIN GENERAL INSTRUCTIONS

Step 5:

SECURING FLOOR

• Check oorboards are correct size. Do not mix up with roof boards.

• Lay 5 longer & 3 shorter oorboards in posion and tack in place. Leave approx. 2.5mm gap between the

edge of the oorboards and the inside of external walls. (Detail E)

NOTE: DO NOT FULLY SECURE AS THESE ARE ONLY TO KEEP THE FLOOR SQUARE WHILE BUILDING

THE LOG CABIN.*

• *For cabins with internal paron, the oorboards will need to be fully installed at this stage to allow

paron base logs to be installed. Please jump to Step 16 for details.

10 gersheds.com 0113 205 4189 sales@gersheds.com

Inhaltsverzeichnis

Andere Tiger Gartenhaus Handbücher

Tiger

Tiger MAYFLOWER SUMMERHOUSE Bedienungsanleitung

Tiger

Tiger BLAKE Bedienungsanleitung

Tiger

Tiger CORBETTI Bedienungsanleitung

Tiger

Tiger PRESSURE TREATED OCTAGONAL Konfigurationshandbuch

Tiger

Tiger PETHOUSE & RUN Bedienungsanleitung

Tiger

Tiger SHERE TIG/INS16 Bedienungsanleitung

Tiger

Tiger Delta Bedienungsanleitung

Tiger

Tiger TIGERFLEX Elysia Bedienungsanleitung

Tiger

Tiger MALAYAN Bedienungsanleitung

Tiger

Tiger Gamma Bedienungsanleitung

Tiger

Tiger OPTIMA Bedienungsanleitung

Tiger

Tiger Tigercub Crazy Cottage Bedienungsanleitung

Tiger

Tiger RAYNER Bedienungsanleitung

Tiger

Tiger Tigercub Magic Mansion Bedienungsanleitung

Tiger

Tiger KERR Bedienungsanleitung

Tiger

Tiger KIPLING LOG CABIN Bedienungsanleitung

Tiger

Tiger SIGMA TIG/INS48 Bedienungsanleitung

Tiger

Tiger ROSEN Bedienungsanleitung

Tiger

Tiger LAKRA Bedienungsanleitung

Tiger

Tiger GARDEN SHELTER Bedienungsanleitung

Tiger

Tiger Tigercub Groovy Garage Bedienungsanleitung

Tiger

Tiger GARDEN STUDIO Bedienungsanleitung

Tiger

Tiger INS32 Bedienungsanleitung

Tiger

Tiger TIGERFLEX TIG/INS39 Bedienungsanleitung

Beliebte Gartenhaus Handbücher anderer Marken

Mercia Garden Products

Mercia Garden Products 0628LOG181-V4 Bedienungsanleitung

Lemeks

Lemeks Palmako PA120-5930-6 Installationshandbuch

Gartenhaus-King

Gartenhaus-King Valery Bedienungsanleitung

Rion

Rion Hobby Gardener Bedienungsanleitung

POD

POD Camping 480 Bedienungsanleitung

Select

Select ISAAC E9682 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 01DTSHPWOR1010DDOW-V4 Gebrauchsanweisung

Palmako

Palmako Saale Bedienungsanleitung

Lemeks

Lemeks Palmako Kira EL16-3623 Installationshandbuch

Mercia Garden Products

Mercia Garden Products 0644LOG186-V4 Gebrauchsanweisung

Palmako

Palmako Roger FR44-5953-2 Bedienungsanleitung

Mercia Garden Products

Mercia Garden Products 03DTSHHP1206HGD4MW-V1 Gebrauchsanweisung

WAR-LOCK

WAR-LOCK GARDENSHED Skillion Series Bedienungsanleitung

Pergola kits USA

Pergola kits USA PREMIUM VINYL PAVILION Bedienungsanleitung

G21

G21 Boston 882 Bedienungsanleitung

Lemeks

Lemeks Palmako Grace PM56-4529 Installationshandbuch

Mercia Garden Products

Mercia Garden Products 03WES0808-V1 Gebrauchsanweisung

Shire

Shire Salcey Bedienungsanleitung