Timex T237 Bedienungsanleitung

Model T237

Dual Alarm Clock Radio

Para instruccionese en Espanol, llame al 1-800-888-4491.

For questions or comments regarding this or other products,

please call our toll-free number 1-800-888-4491.

For additional information, online registration,

and exclusive special offers visit our website:

www.timexaudio.com

Note: The manufacturer is not responsible for any radio or TV interference cause

by unauthorized modifications to this equipment. Such modification

could void the user’s authority to operate the equipment.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

The lightning flash with arrowhead in an equilateral triangle is intended to alert the

user of the presence of uninsulated “dangerous voltage” within the product’s enclosure

that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user of the

presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

The symbols above are located at the back of the cabinet.

CAUTION: To prevent electric shock, match wide blade of plug to wide

slot. Fully insert.

ATTENTION: Pour éviter les choc électriques. Introduire la lame la plus

large de la fiche dans la borne correspondante de la prises et pousser

jusqu’au foud.

This device complies with part 15 of the FCC Rules. Operation is subject to the

condition that this device does not cause harmful interference.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

A Consumer Guide to Product Safety

IMPORTANT SAFETY INSTRUCTIONS

This unit has been designed and manufactured to assure your personal safety. Improper use can result in potential

electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use. Keep

these instructions handy for future reference. Take special note, adhere to all warnings, and always follow the instruction on

the unit and in the instructions and service manuals.

1. Water and Moisture - The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink,

laundry tub, swimming pool or in a wet basement.

2. Ventilation - The unit should be situated so that its location or position does not interfere with it’s proper ventilation.

For example, it should not be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it

should not be placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the

ventilation openings.

3. Heat - The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances

(including amplifiers) that produce heat.

4. Power Sources - The unit should be connected to a power supply only of the type described in the operating instructions

or as marked on the appliance.

5. Grounding or Polarization - This product is equipped with a polarized alternating-current line plug (a plug having one

blade wider than the other). As a safety feature this plug will fit into the power outlet only one way. If you are unable to

fit the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your

obsolete outlet. Do not defeat the safety purpose of your polarized plug.

6. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched

by items placed upon or against them. It is always best to have a clear area from where the cord exits the unit to where

it is plugged into an AC outlet.

7. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleansers or aerosol cleaners.

use a damp cloth for cleaning.

A Consumer Guide to Product Safety

8. Non-Use Periods — the power cord of the unit should be unplugged from the outlet when it is to be left unused for

a long period of time.

9. Objects and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the

enclosure through openings.

10. Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards.

11. Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused

for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent

damage to the product due to lightning and power-line surges.

12. Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in

a risk of fire or electric shock.

13. Damage Require Service - The unit should be serviced by qualified service personnel when:

A. The power supply cord or plug has been damaged.

B. Objects have fallen into or liquid has been spilled into the enclosure.

C. The unit has been exposed to rain.

D. The unit has been dropped or the enclosure damaged.

E. The unit does not appear to operate normally or exhibits a marked change in performance.

14. Servicing - The user should not attempt to service the unit beyond that described in the user’s operating instructions.

All other servicing should be referred to qualified service personnel. If you have any questions, call SDI Technologies

Inc. Timex Audio Products Division Customer Service, 1-800-888-4491.

15. Safety Check — Upon completion of any service or repairs to this product, ask the service technician to perform

safety checks to determine that the product is in proper operating condition.

16. Antenna - Do not connect to an external antenna.

For questions or comments regarding this or other products, please call our toll-free

number: 1-800-888-4491.

Table of Contents

A Consumer Guide to Product Safety .................................................................................................3-4

Battery Backup Installation ......................................................................................................................6

Maintenance.................................................................................................................................................6

Controls and Indicators..............................................................................................................................7

LCD Display..................................................................................................................................................8

Adjusting The Display Brightness ...........................................................................................................9

Setting Clock Time .....................................................................................................................................9

Listening to Radio ..................................................................................................................................10

Sleeping to Radio ....................................................................................................................................10

Operating the Alarms ...............................................................................................................................11

Operating the Snooze Feature ................................................................................................................11

“Sure Alarm” Battery Backup Installation

It is strongly recommended that a 9-Volt battery be installed into the unit, as directed below, in order to activate

this product’s “Sure Alarm” Battery Backup feature. In the event that the AC power cord is disconnected or a

power failure or other interruption occurs, the “Sure Alarm” Battery Backup will maintain clock and alarm settings

for the life of the battery, ensuring that the alarm (buzzer only) will sound at the set time. During any interruptions

the clock display will be blank, but time and alarm settings will be saved and automatically restored when AC

power is again active.

Note: The Snooze button will not operate if the alarm goes off during a power failure.

To install the battery:

1. Open the battery compartment cover.

2. Install one 9-Volt battery (alkaline is recommended for longer life), making sure

that the large terminal matches to the large outlet.

After installing the battery and reading the Maintenance notes, plug the AC power

cord into an outlet, being sure to match the wide blade of the plug to the wide

slot of the outlet. Never force the plug into an outlet. When the unit is connected

to AC power for the first time, the display may blink until the time is set.

Note: You should replace the battery every six months, or after any extended power outage that could drain

the battery power.

Battery Compartment

1. Place the unit on a level surface away from direct sunlight or sources of excessive heat.

2. Protect your furniture when placing the unit on natural wood or wood with a lacquered finish. A cloth or other

protective material should be placed between the unit and the furniture.

3. Clean the casing with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such

as thinner, benzine, or similar materials are not recommended, as they may damage the surface of the case.

4. If the unit is not to be used for a prolonged period, such as a month or longer, remove the batteries to prevent

possible corrosion. Should the battery compartment become corroded or dirty, clean the compartment

thoroughly and replace all the batteries.

Maintenance

Controls and Indicators

Snooze Button

Radio On / Off Button 

Volume Control

Tuning Control

Band Switch

Alarm-1 Selector Switch 

Alarm-2 Selector Switch 

Fast FWD. Button

Sleep Button

Dimmer Switch (back) 

Alarm Set / Time Set Button 

Slow REV. Button 

Alarm Reset/Sleep Off Button 

LCD Display

PM Indicator

Alarm 1 Indicator

Time

Alarm 2 Indicator

Adjusting the Display Brightness

1. This unit features the option of selecting either a bright or dim clock display. To set a bright clock

display, slide the Dimmer Switch, located on the back of the unit, to “Hi.” To set a less-bright clock

display, slide the Dimmer Switch to “Lo.”

Setting Clock Time

1. Slide the Alarm Set/Time Set Button to the TIME position.

2. Set the clock time using the Fast Forward Buttonand theSlow Rewind Button. The best

method of setting the clock is advancing the time rapidly using the Fast Forward Button until it is a few

minutes past the desired time, then using the Slow Rewind Button to reach the desired time. To

reverse the time setting at a high speed, press and hold both buttons simultaneously. Remember to set the

correct AM or PM alarm time, as shown by the PM Indicator on the display.

3. After setting the time, slide the Alarm Set/Time Set Button to the OFF position.

Note: Extend FM wire antenna fully for best FM reception. Rotate radio, as required, for best AM reception.

1. Set Radio On/Off Button to ON position to turn on the radio.

2. Set the Band Switch on the right-hand side to the desired band, AM or FM. Rotate the Tuning

Control thumbwheel to select a station. Adjust the Volume Control thumbwheel as desired.

3. To turn off the radio, set Radio On/Off Button to OFF position.

4. If you have chosen to wake to the radio, the alarm will sound with the station and volume that you have

selected.

Listening to Radio

This unit features a radio sleep timer which can be programmed to play the radio for a set amount of time

(maximum 59 minutes) before automatically turning off.

1. Press the Sleep Button in order to turn on the radio and start the sleep timer. The timer will start at

the maximum 59-minute setting.

2. Select the station and adjust the volume to the desired level (see the Listening to Radio section). If you have

chosen to wake to the radio, the alarm will sound with the station and volume that you have selected.

3. To adjust the sleep timer, press and hold the Sleep Button. The display will begin counting down from

“59.” Release the Sleep Button when the display reaches your desired sleep time. When the display

reaches “00” the radio will shut off automatically.

4. To stop the radio at any time before the timer reaches “00” press the Alarm Reset/Sleep Off

Button.

Sleeping to Radio

Inhaltsverzeichnis

Andere Timex Radiowecker Handbücher

Timex

Timex T235Y Bedienungsanleitung

Timex

Timex T2351 Bedienungsanleitung

Timex

Timex T736 Bedienungsanleitung

Timex

Timex TW500 Bedienungsanleitung

Timex

Timex T435 Bedienungsanleitung

Timex

Timex T234 Bedienungsanleitung

Timex

Timex TM80 - Clock Radio / Digital Audio Player Bedienungsanleitung

Timex

Timex T715 Bedienungsanleitung

Timex

Timex T433 Bedienungsanleitung

Timex

Timex T433 Bedienungsanleitung

Timex

Timex T626S Bedienungsanleitung

Timex

Timex Satellite Series Bedienungsanleitung

Timex

Timex T618 Bedienungsanleitung

Timex

Timex T2312 Bedienungsanleitung

Timex

Timex T609 Bedienungsanleitung

Timex

Timex T600 Bedienungsanleitung

Timex

Timex T248T Bedienungsanleitung

Timex

Timex T2351 Bedienungsanleitung

Timex

Timex T308 Bedienungsanleitung

Timex

Timex T1308 Bedienungsanleitung

Timex

Timex T231Y Bedienungsanleitung

Timex

Timex TS70 Bedienungsanleitung

Timex

Timex T618 Bedienungsanleitung

Timex

Timex T228B Bedienungsanleitung

Beliebte Radiowecker Handbücher anderer Marken

Denver

Denver CRQ-105 Bedienungsanleitung

Audiovox

Audiovox CE90 Bedienungsanleitung

Sony

Sony Dream Machine ICF-C763L Bedienungsanleitung

Sanyo

Sanyo DMP-P6 Bedienungsanleitung

Yamaha

Yamaha ISX-80 Bedienungsanleitung

Pyle

Pyle PLMR20W Bedienungsanleitung

Blaupunkt

Blaupunkt CR7BK Bedienungsanleitung

Philips

Philips AJ3180 Bedienungsanleitung

HoMedics

HoMedics SS-5500-2EU Bedienungsanleitung

RCA

RCA RC66i Bedienungsanleitung

Versaudio

Versaudio Vers Bedienungsanleitung

SOUNDMASTER

SOUNDMASTER UR8100 Bedienungsanleitung

Audiovox

Audiovox CE90 Bedienungsanleitung

Jensen Audio

Jensen Audio JCR-222 - AM/FM Projection Alarm Clock Radio Bedienungsanleitung

Roberts

Roberts ChronoDAB Bedienungsanleitung

AEG

AEG MRC 4132 BT Bedienungsanleitung

Tokai

Tokai TC-155 Bedienungsanleitung

Sony

Sony DREAM MACHINE ICF-C318 Bedienungsanleitung