Tion O2 MAC Bedienungsanleitung

USER MANUAL

Compact Ventilation Unit Tion О2

Breezer

User manUal

Compact Ventilation Unit Tion О2 Breezer

Table of Contents

1. GENERAL................................................................6

2. PACKING LIST ...........................................................7

3. SAFETY REQUIREMENTS .................................................8

4. TECHNICAL PARAMETERS ................................................8

5. SCHEMATIC DIAGRAM AND OPERATING PRINCIPLE .........................9

6. GETTING STARTED ......................................................24

7. MAINTENANCE .........................................................26

8. STORAGE, TRANSPORTATION, DISPOSAL..................................28

9. WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

ACCEPTANCE CERTIFICATE .................................................31

SALES CERTIFICATE ........................................................32

Compact Ventilation Unit

Dear Customer!





The Compact Ventilation Unit Tion O2 Breezer (the «device» in what follows) is de-

signed for active supply of considerable volumes of outside air into the building. This

involves the following:

• fresh air is continuously supplied by a silent fan from outside in a controlled flow;

• a lter set cleans the air of the main contaminants;

• when necessary, the intake air can be heated to a preset temperature (except for

Tion O2 Lite version);

• the device is compatible with the MagicAir system (section 5.4; this applies to

the Tion О2 MAC and Tion О2 MAC Base congurations; other versions can be

optionally upgraded with this compatibility feature).

Technical and user-dened parameters may vary depending on the particular set

purchased, installation and operating environment, and lter conguration and condi-

tion.

The Manufacturer reserves the right to introduce necessary changes into the de-

vice or into the design of its separate parts, without detracting from the performance

of the equipment.

Before using the device please read the operation manual and the warranty condi-

tions carefully, make sure that the warranty certicate has been lled out correctly, and

check the completeness and the appearance of the device.

PLEASE NOTE!

• The device is not intended to be used for heating premises.

• The device is not designed as a medical device.







For more details about the product, manufacturer, sales and service center adress

and contact information please visit: tion.global





Package option Tion O2

MAC

Tion O2

Standard

Tion O2

MAC

Base

Tion O2

Base

Tion O2

Lite

Device •••••

F7 base lter •••••

High-efciency Е11 (H11) lter • • – – –

Adsorption catalytic lter AK • • – – –

Heater ••••–

Remote control •••••

AAA batteries, 2 pcs. •••••

Interface Unit (compatibility with

MagicAir) •–•– –

User Manual •••••

Mounting template •••••

Anchor bolt, 2 pcs. •••••

Warranty card •••••

Shipping package •••••

The version of the device is indicated in the warranty card and in the certicate of pur-

chase, included in this Manual.

In the Tion О2 MAC and Tion О2 Standard versions (conguration sets), the devices

clean the air from all types of contaminants, heat it if necessary and supply it into the

room. They are recommended for use in all regions, especially in locations with unfa-

vorable environmental settings.

The Tion O2 Lite version is recommended for use in regions with warm climate (see

outdoor temperature applicability chart in section 4, Table of Technical Parameters).

Tion O2 Lite, Tion O2 Base and Tion О2 MAC Base versions are recommended for use

in environmentally clean regions. To ensure enhanced air cleaning, Tion O2 Lite, Tion

O2 Base, Tion О2 MAC Base devices should be outtted with the appropriate additional

lters.

The Tion О2 MAC and Tion О2 MAC Base versions include an interface module for

connection to the MagicAir smart microclimate control system (section 5.4). All other

versions can be updated to install such an interface unit at any authorized service cen-

ter of the Manufacturer.

The Tion O2 Lite version can be upgraded to Tion O2 Base upon the user’s request.

Compact Ventilation Unit

Please contact any authorized service center of the Manufacturer to install the optional

heater system (at additional cost).

The user can upgrade the Tion O2 Base version to Tion O2 Standard without spe-

cialist assistance, by installing additional lters. The Tion О2 MAC Base version can be

similarly upgraded to Tion О2 MAC with additional lters.

The lters are available from the ofcial Tion online store tion.global or from autho-

rized dealers.



1. The device should be installed in a location that ensures free and safe access.

2. Do not use in premises with temperature below 5°С or above 40°С.

3. Do not use in premises with relative humidity above 80% at 20°С.

4. Avoid direct sunlight.

5. During a lightning storm, turn the device off and unplug it from the mains

supply.

6. The device should be unplugged from the power supply system prior to main-

tenance or scheduled servicing.

7. The user is not authorized to perform any repairs or alterations to the device

design.

8. No foreign objects or water should be allowed to get into the device.

9. The device must not be used if the power supply cord insulation or any part of

the housing is damaged.

10. If any damage or possible signs of abnormal operation are detected, pull the

plug out of the power socket and contact an authorized service center for ad-

vice on further operation of the device.



Package option Tion O2

MAC

Tion O2

Standard

Tion O2

MAC Base

Tion O2

Base Tion O2 Lite

Power consumption

(min/max), W 18/1450 18/1450 18/1450 18/1450 18/30

Permissible outdoor

temperature range,

°С

-40...+50 -40...+50 -40...+50 -40...+50 0*...+50

Noise level, dBA 32/39/

45/52

32/39/

45/52

32/39/

45/52

32/39/

45/52

32/39/

45/52

Air flow rate**, m3/

35/60/

75/120

35/60/

75/120

40/65/

85/120

40/65/

85/120

40/65/

85/120

Package option Tion O2

MAC

Tion O2

Standard

Tion O2

MAC Base

Tion O2

Base Tion O2 Lite

Power supply ~220 V,

50 Hz

~220 V,

50 Hz

~220 V,

50 Hz

~220 V,

50 Hz

~220 V,

50 Hz

Net weight, kg 8.0 8.0 7.4 7.4 6.8

Overall dimensions

(H х W х D), mm

514 x 454 x

163

514 x 454 x

163

514 x 454 x

163

514 x 454 x

163

514 x 454 x

163

Assigned lifetime,

years 5 5 5 5 5

Guarantee period,

years 1 1 1 1 1

Compatibility with

MagicAir Yes No Yes No No

* Use of the Tion O2 Lite version at negative outside air temperatures may reduce its service life.

** Device performance depends on the operating conditions.





A schematic diagram of the device with maintenance panel removed (Tion O2

Standard version) is shown in Fig.1.

Figure 1. Device layout

Compact Ventilation Unit

PLEASE NOTE! The device is equipped with an electromechanically

driven air duct flap (“the flap” in what follows). It opens the air inlet duct

when the device is turned on. After turning the device off the flap closes

the channel to prevent cold air from penetrating into the room. The flap

takes 7-10 s to open/close. If the flap is not fully closed because of an

unexpected failure, a double warning beep is issued.



Oxygen-rich air from outside is drawn into the air intake pipe of the device. The air

intake section prevents rainwater from penetrating into the housing. The air is then fed

into the device through the flap via a heat insulated channel. If the device is turned off,

the flap closes the channel for outside air into the device. The air cleaning is performed

inside the casing. The schematic of the operation is shown in Fig.2.

1. Air duct flap

2. Control buttons and LCD display

3. Power switch

4. Base lter F7 (retainer of coarse

dust F7)

5. Heater

6. High-efciency HEPA E11 (H11)

lter (retaining ne dust)

7. Adsorption catalytic lter AK (ab-

sorber of noxious gases)

8. Maintenance panel latches

9. The device must not be used if the

power supply cord insulation or any

part of the housing is damaged.

10. If any damage or possible signs

of abnormal operation are detect-

ed, pull the plug out of the power

socket and contact an authorized

service center for advice on further

operation of the device.

Figure 2. Device operating principle

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Tion Lüfter Handbücher

Tion

Tion Breezer Lite Bedienungsanleitung

Tion

Tion Breezer Lite Bedienungsanleitung

Tion

Tion Breezer 3S Bedienungsanleitung

Tion

Tion Breezer Lite Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Hinkley

Hinkley HIGHLAND Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung