Titan Electronics NetUSB-100iX4 Bedienungsanleitung
NetUSB-100iX4 USB SERVER
USER’S MANUAL
2017 May Edition
Titan Electronics Inc.
Web: www.titan.tw
1
The computer programs provided with the hardware are supplied under a license.
The software provided should be used only with the NCOM series hardware
designed and manufactured by TITAN Electronics Inc.
Trademarks
TITAN and the logo is a registered trademark of TITAN Electronics Inc. in Taiwan.
Microsoft, Windows, Windows XP, Windows Vista, Windows Server, Windows 7,
Windows 8, Windows 10 are trademarks of Microsoft Corporation. All other
trademarks and brands are property of their respective owners.
Copyright
Copyright © TITAN Electronics Inc. 2016. All right reserved. Reproduction of the
manual and software without permission is prohibited.
Disclaimer
TITAN Electronics Inc. provides this document and computer programs “as is” without
warranty of any kind, either expressed or implied, including, but not limited to, its
particular purpose. TITAN Electronics Inc. reserves the right to make improvements
and changes to this user manual, or to the products, or the computer programs
described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However,
TITAN Electronics Inc. assumes no responsibility for its use, or for any infringements
on the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes
are periodically made to the information herein to correct such errors, and these
changes are incorporated into new editions of the publication.
2
Contents
INTRODUCTION..............................................................................................................4
FEATURES.......................................................................................................................5
SPECIFICATIONS .............................................................................................................6
INSTALLATION................................................................................................................7
Step 1 - Connect the NetUSB-100iX4 USB server to your network ...........................7
Step 2 - Connect the USB server's power supply/Read the LEDs ..............................8
RUNNING USB SERVER PROGRAM.................................................................................9
System Firewall ........................................................................................................10
Main Window...........................................................................................................12
Status of NetUSB-100iX4 USB Servers and Devices.................................................13
ACCESSING A DEVICE ...................................................................................................15
SERVER CONFIGURATION ............................................................................................17
Configuration with Web-based Interface ................................................................18
Network Information and Setting........................................................................19
Server Reset .........................................................................................................20
Password Change.................................................................................................21
Configuration with the Utility ..................................................................................22
FUNCTIONS ..................................................................................................................24
Featured Functions ..................................................................................................24
Connect Automatically for Printing .....................................................................24
Create Shortcut....................................................................................................25
Connect Device when Application Starts.............................................................26
Automatically Disconnect USB Device.................................................................27
Device Property....................................................................................................29
Quit ..........................................................................................................................31
Options.....................................................................................................................32
Language ..............................................................................................................32
Server Settings .....................................................................................................32
Device Settings.....................................................................................................33
Search.......................................................................................................................34
View .........................................................................................................................35
Help ..........................................................................................................................36
Additional Information ............................................................................................37
USB Server Status LEDs ........................................................................................37
3
Hardware Restore Factory Default Button ..........................................................37
Hardware Reset Button .......................................................................................38
4
INTRODUCTION
The NetUSB-100iX4 is a network-enabled USB server for connecting USB devices over
the 10/100/1000Mbps Ethernet network running TCP/IP. By adding this USB to
Ethernet server to LAN, you can network-enable USB devices. It breaks the traditional
five-meter USB cabling distance limitation. With this implementation, USB devices
connected to NetUSB-100iX4 can be made available to remote clients over LAN
without a locally attached host PC.
The NetUSB-100iX4 provides a simple and convenient way to extend a USB device over
long distances and allows for sharing that USB device with multiple users over
Ethernet network.
5
FEATURES
Extends USB cabling distance beyond five meters
Allows USB devices to be used and shared by client PCs over LAN
Supports wide variety of USB devices
Compatible with USB 2.0 specification and backward compatible with USB 1.1
Connects up to 4 devices using an additional USB Hub (not included)
Provides plug and play and hot-swap functions akin to an on-board USB port
Access and monitor USB devices over a user-friendly application interface
Supports a wide input power range: DC 9V~DC 48V
6
SPECIFICATIONS
RJ45 Ethernet to one USB 2.0 port
USB 2.0 high speed ports up to 480Mbps
Full 500mA power provided to USB port
Connects up to 4 devices using an additional USB Hub (not included)
10/100/1000Mbps Ethernet support
Supports IP addressing: static and DHCP
LEDs for system/Ethernet status
Field-upgradeable firmware
Supports “Reset” button for system reset
Supports “Default” button for configuration to default setting
Input power range: DC9V~DC48V
Compatible with Windows 8, Windows 7, Windows Vista, Windows XP, Windows
2003 Server
Regulatory approvals: FCC Class B (DoC) and CE
RoHS compliant
7
INSTALLATION
Note: The default configuration for the NetUSB-100iX4 USB server is DHCP enabled. If
the USB server is not able to get an IP address from a DHCP server, it will use the IP
address 169.254.10.10 and the subnet mask 255.255.0.0.
Do not connect your USB device(s) to the USB server until you have finished installing
the USB server software and hardware!!!
Step 1 - Connect the NetUSB-100iX4 USB server to your network
First connect an Ethernet cable to the NetUSB-100iX4 USB server's Ethernet port.
Once the Ethernet cable is connected, connect the other end of the cable to your
network. This can be a free Ethernet port on your DSL router, Ethernet Hub/Switch, or
an 802.11n router/base station.
If you do not have a network, you can connect the USB server directly to the Ethernet
port on your computer using a crossover cable.
8
Step 2 - Connect the USB server's power supply/Read the LEDs
Connect the included power supply to the USB server's power connector.
Once the USB server is powered, the USB server's red “PWR” LED turns ON. After a
few seconds, the yellow “1000M” Ethernet’s status LED and the green “10/100M”
Ethernet’s status LED will flash for an Ethernet status check.
The NetUSB-100iX4 USB server hardware installation is now complete. Please proceed
to the NetUSB-100iX4 utility software installation instructions.
The NetUSB-100iX4 utility setup is an InstallShield based application, which can be
used for installing, uninstalling and upgrading the NetUSB-100iX4 software. To install
the USB server program, please double click the USB server setup file.
Follow the instructions of the wizard to complete the installation process. Once the
installation is complete, the NetUSB-100iX4 utility shortcut is placed on the desktop
as well as in the system tray as shown in the figure below.
Please reboot the system as requested by the installer when the process ends,
otherwise the software might not work properly.
9
RUNNING USB SERVER PROGRAM
To start the USB server program, double click the shortcut icon of the USB server on
the desktop.
This will bring up the main window as shown below.
Andere Handbücher für NetUSB-100iX4
1
Inhaltsverzeichnis
Andere Titan Electronics Server Handbücher
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung