Titan Electronics NetUSB-100iX4 Bedienungsanleitung
Edition: September 2014
NetUSB-100iX4 USB Server User Manual
1
The computer programs provided with the hardware are supplied under a license. The
software provided should be used only with the NetUSB series hardware designed and
manufactured by TITAN Electronics Inc.
Trademarks
TITAN and the logo is a registered trademark of TITAN Electronics Inc. in Taiwan.
Microsoft, Windows, Windows XP, Windows Vista, Windows Server, Windows 7,
Windows 8 are trademarks of Microsoft Corporation. All other trademarks and brands
are property of their respective owners.
Copyright
Copyright of TITAN Electronics Inc. All right reserved. Reproduction of the manual and
software without permission is prohibited.
Disclaimer
TITAN Electronics Inc. provides this document and computer programs “as is” without
warranty of any kind, either expressed or implied, including, but not limited to, its
particular purpose. TITAN Electronics Inc. reserves the right to make improvements and
changes to this user manual, or to the products, or the computer programs described in
this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However,
TITAN Electronics Inc. assumes no responsibility for its use, or for any infringements on
the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are
periodically made to the information herein to correct such errors, and these changes
are incorporated into new editions of the publication.
NetUSB-100iX4 USB Server User Manual
2
Contents
Introduction----------------------------------------------------------------------------- 3
Features---------------------------------------------------------------------------------- 3
Specification---------------------------------------------------------------------------- 4
Installation------------------------------------------------------------------------------- 5
Running USB Server Program---------------------------------------------------- 8
System Firewall----------------------------------------------------------------------------------------9
Main Dialog Box ------------------------------------------------------------------------------------- 12
Status of NetUSB-100iX4 USB Servers and Devices ------------------------------------- 13
Accessing a Device----------------------------------------------------------------- 16
Server Configuration--------------------------------------------------------------- 18
Configuration with Web-based Interface------------------------------------------------------ 19
Change Password----------------------------------------------------------------------------------- 22
Configuration with the Utility---------------------------------------------------------------------- 23
Featured Functions----------------------------------------------------------------- 26
Connect Automatically for Printing-------------------------------------------------------------- 26
Create a Shortcut on Your Desktop ------------------------------------------------------------ 27
Auto Disconnect USB Device-------------------------------------------------------------------- 29
Device Property-------------------------------------------------------------------------------------- 32
Quit--------------------------------------------------------------------------------------- 34
Options --------------------------------------------------------------------------------- 35
Language---------------------------------------------------------------------------------------------- 35
Search----------------------------------------------------------------------------------- 38
View-------------------------------------------------------------------------------------- 39
Help -> About------------------------------------------------------------------------- 40
Additional Information------------------------------------------------------------- 41
USB Server Status LED’s ------------------------------------------------------------------------- 41
Hardware Restore Factory Default Button---------------------------------------------------- 42
Hardware Reset Button---------------------------------------------------------------------------- 42
NetUSB-100iX4 USB Server User Manual
3
Introduction
The NetUSB-100iX4 is a network-enabled USB Server for connecting USB devices over
the 10/100/1000 Mbps Ethernet network running TCP/IP. By adding this USB to
Ethernet Server to LAN, you can network-enable the USB device. It breaks the
traditional five-meter USB cabling distance limitation. By this implementation, USB
devices connected to NetUSB-100iX4 can be made available to remote clients over
LAN- without a locally attached host PC.
The NetUSB-100iX4 provides a simple and convenient way to extend a USB device
over long distances and allows for sharing that USB device with multiple users over
Ethernet Network.
Features
Extends USB cabling distance beyond five meters
Allows USB devices to be used and shared by client PCs over LAN
Supports wide variety of USB devices
Compatible with USB 2.0 specification and backward compatible with USB 1.1
Connects up to 4 devices using an additional USB Hub (not included)
Provides Plug-n-Play and hot-swap functions same as on board USB port
Access and monitor USB devices over a user-friendly application interface
Supports wide input power range: DC9V~DC48V
NetUSB-100iX4 USB Server User Manual
4
Specification
The NetUSB-100iX4 USB to Ethernet Server provides:
RJ45 Ethernet to 1 USB 2.0 port
Allows USB Devices to be used and shared by client PC's over LAN
USB 2.0 High Speed Ports up to 480 Mbps speed
Full 500 mA power provided to USB port
Connects up to 4 devices using an additional USB Hub (not included)
Supports wide variety of USB devices
10/100/1000 Mbps Ethernet support
Supports IP addressing: Static and DHCP
LEDs for system/ Ethernet status
Field-upgradeable firmware
Supports “Reset” button for system reset
Supports “Default” button for configuration to default setting
Input power range: DC9V~DC48V
Compatible Windows XP/ 2003 Server/ Vista/ Windows 7/ Windows 8
Regulatory approvals: FCC Class B (DoC) and CE
RoHS compliant
NetUSB-100iX4 USB Server User Manual
5
Installation
Note: The default configuration for the NetUSB-100iX4 USB server is DHCP enabled. If
the USB server is not able to get an IP address from a DHCP server, it will use the IP
address 169.254.10.10 and the subnet mask is 255.255.0.0.
Do not connect your USB device(s) to the USB Server until you have
finished installing the USB Server software and hardware!!!
Step 1 - Connect the NetUSB-100iX4 USB Server to your Network
First connect an Ethernet cable to the NetUSB-100iX4 USB Server's Ethernet port.
Once the Ethernet cable is connected, connect the other end of the cable to your
network. This can be a free Ethernet port on your DSL router, Ethernet Hub/Switch, or
an 802.11n router/ base station.
If you do not have a network, you can connect the USB Server directly to the Ethernet
port on your computer using a Cross-Over cable.
NetUSB-100iX4 USB Server User Manual
6
Step 2 - Connect the USB Server's Power Supply / Read the LEDs
Connect the included power supply to the USB Server's power connector.
Once the USB Server is powered, you will notice the USB Server's red “PWR” LED
turns ON and after few seconds the yellow “1000M”Ethernet’s status LED and the
green “10/100M”Ethernet’s status LED will be flashed for Ethernet status check.
The NetUSB-100iX4 USB Server hardware installation is now complete. Please
proceed to the NetUSB-100iX4 Utility software installation instructions.
The NetUSB-100iX4 utility Setup is an Install Shield based application, which can be
used for installing, uninstalling and upgrading the NetUSB-100iX4 Software.
To install the USB Server program, please double click the USB Server setup file.
NetUSB-100iX4 USB Server User Manual
7
Then follow the instructions of the wizard to complete the installation process.
Once the installation is complete, the NetUSB-100iX4 utility shortcut is placed on the
desktop as well as in the system tray as shown in the figure below.
Please reboot the system as requested by the installer when the process ends,
otherwise the software might not work properly.
NetUSB-100iX4 USB Server User Manual
8
Running USB Server Program
To start the USB Server program, double click the shortcut icon of the USB Server on
the Desktop.
This would bring up the main dialog as shown below.
NetUSB-100iX4 USB Server User Manual
9
System Firewall
When you start the program for the first time, your Windows OS will prompt you for
Firewall Access. Please make sure you unblock the software or grant it access,
otherwise the program will not work correctly.
Windows XP Firewall Access Alert
Please make sure you “Unblock” the program.
Andere Handbücher für NetUSB-100iX4
1
Inhaltsverzeichnis
Andere Titan Electronics Server Handbücher
Beliebte Server Handbücher anderer Marken
iRobo
iRobo IPC2U Bedienungsanleitung
Nortel
Nortel 1000 Con?guration guide Bedienungsanleitung
Asus
Asus AP7500 Bedienungs- und Wartungshandbuch
Avid Technology
Avid Technology AirSpeed 5000 Bedienungsanleitung
HP
HP Integrity rx2600 Installationsanleitung
Milestone
Milestone Husky IVO 350T Bedienungsanleitung