Titon CME1 Bedienungsanleitung

ventilation systems

Product Manual

Titon CME1

Mechanical Extract Ventilation Unit

Online Version

PCT Patent Application No PCT/GB2009/000114

Online Version

This is the Product Manual for the Titon CME1 (Not the CME1 Q Plus)

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Ventilation is Vital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

How the System Works. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

How to Use the System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installation

Safety and Guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Transportation, Packaging & Storage . . . . . . . . . . . . . . . . . . . . . 9

Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Component Identication . . . . . . . . . . . . . . . . . . . . . . . . . 11

Fixing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Ducting Best Practice . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Ducting Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Commissioning

Speed Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

How to Change Speeds . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Maintenance

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Service Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Contents

Online Version

Interior comfort, air quality and energy eciency are vitally important considera-

tions in buildings today. The Titon CME1 has been developed to meet these de-

mands by extracting stale polluted air from the building whilst fresh air is provided

by passive means.

For the home owner or occupant, this Product Manual explains:

Why ventilation is vital for the good health of your home and its occupants.

How your Titon CME1 system works.

How to operate and maintain your Titon CME1.

For the professional installer, this Product Manual explains:

How to install the Titon CME1.

How to commission the unit.

How to maintain the unit.

It is important to read this Product Manual to ensure your ventilation system is

installed, commissioned and used properly and continues to operate eectively.

Failure to follow the guidance provided in this manual can have an adverse eect

on health.

•

Introduction

Online Version

Ventilation is Vital

Construction methods used in older homes resulted in uncontrolled ventila-

tion via air leaking through the building structure, such as small gaps around

windows and doors or between walls and oors. These leaks allowed a large

amount of air to move through a home largely unnoticed by the occupants. Other fac-

tors, such as open replaces, people being at home more often and opening windows

to “air” rooms during daytime, all helped maintain reasonable levels of air quality in

homes.

However, because this form of ventilation was uncontrolled, a large proportion of

heat escaped to the outside and more energy was needed to make up for this loss.

Modern homes have greatly reduced air leaks and indoor air quality can deterio-

rate rapidly without the use of products

made to control ventilation Chemicals,

gases and moisture produced by every-

day products and activities may lead to

the build up of excessive levels of pol-

lutants which are harmful to the health

of the occupants and may damage the

building.

Poor ventilation can be a major

contributory factor of heart disease, lung

disease, mental illness and many more

threats to our health.

The World Health Organisation and

responsible Governments around the world recognise the vital importance of good in-

door air quality. That is why building regulations govern the way homes are designed

and built. Once homes are occupied it is the responsibility of the occupants to make

sure they use and maintain the ventilation products following the guidance provided.

Ventilation an essential ingredient

Online Version

The Titon CME1 works by continually extracting stale polluted air from rooms

where most moisture is generated. Fresh air is provided passively from outside

to habitable rooms, creating a ow of fresh, clean air throughout the home. The

air travels from terminals built into the ceiling which are connected by hidden ducts to

the unit. The unit is usually installed in a roof space or cupboard.

Each unit is commissioned individually so the amount of air moved is set to suit

the specic size and style of the home.

Most systems will also have a facility to boost the extraction rate at times when

more moisture is being generated, such as when bathing or cooking. This may be

done automatically by electronic sensors or by a conveniently located boost switch for

manual operation.

DO NOT switch o the unit; it is designed to run continuously. If the unit is switched

o indoor pollutant and moisture levels may increase and become a danger to

your health and damage your house.

It is important to follow the advice in this user manual and correctly maintain the

system to ensure a healthy indoor environment.

How the System Works

Typical system layout

Extract Terminals

CME1

Exhaust

Online Version

How to Use the System

The unit runs automatically and should not be switched o, except for mainte-

nance. If a boost switch has been installed, it can be used to increase the extract

ventilation rate at times when moisture or pollutant levels are considered exces-

sive. You may have electronic sensors which detect high levels of moisture and pollut-

ants which boost the system automatically.

All ventilation units require periodic maintenance and this must only be carried

out by a suitably qualied and competent person. See the servicing and maintenance

section for further details.

Product Features

Boost Control (normally via a two-way switch)

Compact low prole unit

Hidden installation xings.

All duct ports on one level

Accepts 204mm x 60mm or 110mm x 54mm ducting.

Unit can be cleaned and serviced without disturbing any ducting.

Straightforward installation.

•

Online Version

Installation

Safety and Guidance

The electrical installation of the appliance MUST be carried out by a suitably quali-

ed competent person and all wiring must be in accordance with current I.E.E.

Regulations and all appropriate standards and applicable regulatory guidance.

The appliance must be connected to a local isolation switch with a contact sepa-

ration of at least 3mm.

The appliance is suitable for 230V ~ 50/60Hz single phase with a fuse rating of 3A.

Ensure that external grills are located away from any ue outlet, in accordance

with relevant Building Regulations.

Always ensure ducting is free from blockages before switching the unit on.

We recommend a minimum distance of 200mm between the appliance and any

sharp bends in duct work.

Installation of the appliance MUST be carried out by a qualied and suitably

competent person and should be carried out in clean, dry conditions where dust

and humidity are at minimal levels.

The appliance is not suitable for installation to the exterior of the dwelling.

For ducting recommendations see Ducting Best Practice, page13.

Failure to comply with any of the above points will have an impact on the validity

of your guarantee.

•

Online Version

Installation

Transportation, Packaging & Storage

Great care should be taken when transporting the appliance, DO NOT drop as

damage may occur.

The unit must always be stored in a clean and dry environment.

Remove all packaging before installation but leaving duct port covers/bungs in

place (if tted) until connecting ducting.

Inspection

Inspect the appliance for damage.

Check all accessories have been supplied.

•

Parts List

CME1 Unit x 1.

Port covers x 3.

Product manual x 1.

•

CME1 Screw Pack x 1.•

All shortages or damage must be reported to the supplier.

Preparation

Important: read these instructions fully before the installation of this appliance

NEVER install the CME1 in an area which does not have sucient access the for

future maintenance (see Dimensions) , or‘box-in’the unit, as the area may subse-

quently surface nished making access to the unit dicult.

NEVER install the appliance in an environment which contains:

Excessive oil or a grease laden environment.

Hazardous gases, liquids or vapours that are ammable or corrosive.

Ambient temperatures above 40°C or below -5°C.

Humidity levels above 90% or a wet environment.

•

Online Version

Installation

Dimensions

This diagram shows the overall dimensions of the unit, and the additional space

required around the unit once installed to allow for future servicing and maintenance.

450

421

355

390

252

550

450

590

Service Void

All dimensions in mm

Online Version

Inhaltsverzeichnis

Andere Titon Lüfter Handbücher

Titon

Titon HRV1.25 Q Plus ECO Montageanleitung

Titon

Titon TP325 Bedienungsanleitung

Titon

Titon HRV1.35 Q Plus ECO Montageanleitung

Titon

Titon HRV20 Q Plus ECO Bedienungsanleitung

Titon

Titon HRV10 Q Plus Bedienungsanleitung

Titon

Titon TP408HMBE Bedienungsanleitung

Titon

Titon Solace TP200/RT Bedienungsanleitung

Titon

Titon CME2 Q Plus LS Bedienungsanleitung

Titon

Titon TP440MB Bedienungsanleitung

Titon

Titon CME3.1Q+ Bedienungsanleitung

Titon

Titon CME3Q+ Betriebsanleitung

Titon

Titon HRV2.75 Q Plus Bedienungsanleitung

Titon

Titon PIV L3 Bedienungsanleitung

Titon

Titon HRV1.3 Q Plus ECO Bedienungsanleitung

Titon

Titon TP577 Bedienungsanleitung

Titon

Titon CME2Q+ Betriebsanleitung

Titon

Titon Titon Ultimate dMEV Bedienungsanleitung

Titon

Titon TP221T Bedienungsanleitung

Titon

Titon CME3Q+ Betriebsanleitung

Titon

Titon TP461BC Bedienungsanleitung

Titon

Titon solitude Bedienungsanleitung

Titon

Titon HRV1.25 Q Plus ECO Bedienungsanleitung

Titon

Titon TP406HMB Bedienungsanleitung

Titon

Titon MVHR Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Hinkley

Hinkley HIGHLAND Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung