TLS Electronics QuickControl XL Bedienungsanleitung

TLS electronics GmbH

Tel.: +49 (0) 2103 50 06 - 0

Marie-Curie-Straße 20

Fax: +49 (0) 2103 50 06 - 90

D –40721 Hilden

e-mail: info@tls-electronics.de

QuickControl XL

Installation and user manual

Ident. Nr.: 8705663

Installation and user manual

2 Stand 09/17

Content

C 1 Allgemeine Informationen ............................................................3

C 2 Bestimmungsgemäße Verwendung und Einsatz.........................7

C 3 Geräteansicht/Gehäuse ...............................................................8

C 4 Montage/Verkabelung................................................................11

C 5 Inbetriebnahme ..........................................................................16

C 6 Bedienung..................................................................................50

C 10 Optionen...................................................................................51

C 11 Pflege, Wartung, Entsorgung, Support ....................................54

C 12 FAQ..........................................................................................55

C 13 Anschlussplan und Diagramme ...............................................57

Installation and user manual

Stand 09/17 3

C 1 General Information

C 1.1 Identification

Manufacturer: ..................................................... TLS electronics GmbH

Marie-Curie-Straße 20

D-40721 Hilden

Tel: +49 (0) 2103 5006 0

email: info@tls-electronics.de

Product:....................................................................... QuickControl XL

Version:.............................................................................................1.0

Installation and user manual:..............................................State 09/17

These operating instructions are a part of this product. They contain

important notes on handling the device. Please remember this also if

you pass on the device to third parties. Keep these operating

instructions for further reference.

Imprint

This operating instructions are published by TLS Communication

GmbH. All rights, including translation, reserved. Reproduction of any

kind, e.g. photocopies, microfilms or capturing through electronic data

processing equipment requires written approval by the publisher.

Reprint, also in part, is prohibited. These operating instructions reflect

the technical status at the time of going to press. Technological and

design changes are reserved.

Installation and user manual

4 Stand 09/17

C 1.2 Scope of delivery

QuickControl XL Ident. Nr.:

1x QuickControl XL..................................................................8640045

1x Infrared emitter single .......................................................8705445

1x Mains adaptor 5V/1000mA .................................................8706599

1x Screwdriver.........................................................................8705602

1x Cable USB 1m Am/BMini5m ..............................................8705594

Optional:

Adaptor (installation version) ..................................................8640024

C 1.3 Technical Data

External power supply: ................... 230 VAC, 50 Hz auf 7,0 VDC,

.................................................................................................0,5 A

Switching outputs max:................................................30V / 300mA

Connections:........................................2 x 9 pin Wago Klemmleiste

Inputs:.............................................................1 x Schlüsselschalter

........................................................................2 x externe Eingänge

Outputs ...................................................................................2 x IR

..............................................................................4 x Schaltkontakt

............................................................ 1 x Schaltkontakt GreenLine

.........................................................................................1 x RS232

Weight:.......................................................................................96 g

Dimensions (D/H/W):.............................................81 x 26 x 81 mm

C 1.3.1 PC System requirements

PC with INTEL® based or compatible Processor

256 MB RAM

50 MB available hard disc

Graphics card Minimum resolution 1024x768 Pixel

From Windows XP

Microsoft ® .NET Framework from Version 2.0

C 1.4 Environmental conditions

Operating temperature:............................................+5°C bis +40°C

Installation and user manual

Stand 09/17 5

Rel. humidity:....................................................................Max. 85%

Atmospheric pressure:.........................................600 bis 1000 hPA

C 1.5 In case of damage in transport

In case of transport damage, please observe the following:

Do not change the goods and the packaging in any way.

Let the deliverer sign for the damage.

Do not use the damaged device.

In case of delivery by a forwarding agent or parcel service,

please notify us of the damage telephonically or in writing

within 5 calender days.

Do not return the device without prior consultation!

Please note that we only accept returned goods if agreed to

accept the return in advance.

Non-compliance with these regulations invalidates any claim

for compensation!

The following regulations and safety notes regarding installation

and maintenance must be observed:

C 1.6 Standards and regulations

VDE 0100 Regulations for erection of power installations for rated

voltages below 1000V.

VDE 0105 Operating power installations, general stipulations.

EN 60335-1 Safety of household and similar electrical appliances.

C 1.7 General safety notes

Installation and user manual

6 Stand 09/17

This operating instructions contains basic notes to be observed when

operating TLS QuickControl XL. Follow the instructions closely to

avoid errors. It is therefore imperative to read these operating

instructions before working with TLS QuickControl XL.

The safety notes contained in these instructions that result in hazards

to persons unless observed, are indicated by the

Safety symbol in acc. With DIN 4844-W8 and the word “Danger”.

Work on electrical components or component groups may only be

performed by a qualified electrician in acc. with electrical regulations

(e.g. EN 60204, DIN VDE 0100/0113/0160).

Plug connections and cables may be destroyed. Connect plugs and

sockets without using force. Do not kink cables when laying; lay with

an adequate radius (R>5 x cable diameter).

Screws, bolts and threads may be damaged. Use suitable tools to

loosen screws and bolts.

Use device indoors only, i.e. not in open air. Never expose the device

to moisture!

C 1.8 Assembly notes

Installation and user manual

Stand 09/17 7

Danger

Before starting any work, unplug all devices / equipment / areas and

secure against accidental re-connection.

C 1.9 Warranty

TLS warranty for TLS QuickControl XL is 36 months. Damages

arising from improper operation or through use of force are not

covered by this warranty. The warranty is invalidated if unauthorised

persons open the device.

C 1.10 Safety

Danger

Voltage and current fluctuations when connecting the TLS

QuickControl XL may damage electronic components. Connect all

inputs and outputs before connecting the power supply.

Danger

Allow technical staff only to connect the device. (e.g. EN 60204, DIN

VDE 0100/0113/0160)

Danger

Electrical shocks from the power supply units may be fatal or lead to

grave injury to health. Never open the housing of the TLS

QuickControl XL.

C 2 Application area and intended use

Installation and user manual

8 Stand 09/17

TLS QuickControl XL is a multifunctional room control system for

small and mid-size conference rooms. QuickControl XL trasmits

control commands over long distances via IR commands and RS232

protocols to playback and display devices and controls via I/O

contacts connected screens, ceiling lifts and similar media techno-

logial devices.

QuickControl XL can be mounted space-saving in wall or integrated

in every table installation module. With each button at QuickControl

XL 8 functions can be executed simultaneously. With 8 internal and 2

optionally connectable external buttons a total of up to 80 functions

can be executed in that way.

The labelling of QuickControl XL can be done according to

individual needs.

QuickControl XL can be easily configurated via itsConfiguration

Tool,

The integrated GreenLine function of QuickControl XL diconnects

automatically all connected devices after the presentation from the

230 V~/110 V~ mains and puts all devices back into their initial state.

Thus this room control system helps to save energy costs and to

extend the devices’ life cycle.

C 3 View of device/Housing

Installation and user manual

Stand 09/17 9

C 3.1 Front view, operating mode

Sketch 1

C 3.2 Front view

Sketch 2

The transparent plastic cover for the inscription area is engaged at

the top and bottom. Using the miniature screwdriver, the cover

Mechanical

installation lock

PC output

Infrared receiver

Dip switch

Installation and user manual

10 Stand 09/17

can be loosened at the recess. The mechanical installation lock

and the PC connection, operating mode switch and infrared

learning eye can now be used.

C 3.3 Button numbering

Sketch 3

C 3.4 Rear view with cable terminal strips

Two 9-pole terminal strips X1 and X2 are located at the back of

QuickControl. The mains adaptor, 2 infrared emitters, 4 relays and

the mechanical installation lock can be connected to these terminal

strips (key switch to lock the keypad against unauthorised users).

Sketch 4

Inhaltsverzeichnis

Andere TLS Electronics Steuerungssystem Handbücher

TLS Electronics

TLS Electronics 875760 Bedienungsanleitung

Beliebte Steuerungssystem Handbücher anderer Marken

Pentair Pool Products

Pentair Pool Products Compool Bedienungsanleitung

ComfortNET

ComfortNET CTK04 Bedienungsanleitung

Fireye

Fireye InSight II 95DSS3 Bedienungsanleitung

CAME

CAME G3000 Bedienungsanleitung

Idemia

Idemia MorphoAccess VP MD Bedienungsanleitung

Axis

Axis P1445-LE-3 Bedienungsanleitung

HEIDENHAIN

HEIDENHAIN TNC 150 B Bedienungsanleitung

CNC-Step

CNC-Step High-Z T-Series Bedienungsanleitung

Doosan

Doosan DVF Series Bedienungsanleitung

Honeywell

Honeywell KAP 140 Bedienungsanleitung

Honeywell

Honeywell vk41 series Bedienungsanleitung

AirBench

AirBench FPW Installationsanleitung

Cypress

Cypress HHR-3160 Bedienungsanleitung

CAME

CAME GLT40AOS Bedienungsanleitung

Zonex

Zonex GEN II -VVT Benutzerhandbuch

Altronics

Altronics K 9650 Bedienungsanleitung

micro-trak

micro-trak RoadMaster Bedienungsanleitung

micro-trak

micro-trak Calc-An-Acre II Bedienungsanleitung