TMG TMG-LSN10 Bedienungsanleitung
►www.tmgindustrial.com P0 / 17 Toll Free: 1-877-761-2819
13.5
►www.tmgindustrial.com P1 / 17 Toll Free: 1-877-761-2819
Introduction
We congratulate you on your new path to better health! Thousands of users enjoy the
benefits of an infrared sauna every day. Now you can enjoy the great benefits of
infrared heat within the privacy of your own home.
Please read this manual carefully and thoroughly before using an Infrared Sauna for the
first time. We recommend for you to keep this manual for future reference.
Benefits:
Superior Detoxification: Removes Heavy Metals & Fat-stored Toxins
Increased Cardiovascular Conditioning
Stimulated Immune System
Improved Circulation
Pain Relief
Weight Loss and Cellulite Reduction
Beautiful Skin
Stress Reduction
Features:
High quality wood craftsmanship
High quality electronic control system & digital control panel
Pre-assembled board and build-in electrical elements makes the installation easy
Accurate temperature sensor
Energy efficient
Considerate detailed designs
►www.tmgindustrial.com P2 / 17 Toll Free: 1-877-761-2819
For any missing parts please contact your local distributor.
TMG-LSN10/20/30 Part List
S/N
PART
PART DESCRIPTION
QTYS
NOTE
1
HY001
Front panel
1
2
HY002
Back panel
1
3
HY003
Side panel (L)
1
4
HY004
Side panel (R)
1
5
HY005
Top panel
1
6
HY006
Bench
1
7
HY007
Floor panel
1
8
HY008
Bench heater
1
9
HY009
Handle
2
Interior&Exterior
10
HY010
Hinge
2
11
HY011
Control panel
1
12
HY012
Heat panel for Back panel
2
13
HY013
Heat panel for side panel
2
14
HY014
Heat panel for bench heater
1
15
HY015
Speaker
2
16
HY016
Glass door
1
1565*540*6mm
17
HY017
Control box
1
18
HY018
Bluetooth
1
19
HY019
Screws: For installing the bench &
the roof panel
10
M4*40
20
HY020
Screws: For installing the handle
2
M6*75
►www.tmgindustrial.com P3 / 17 Toll Free: 1-877-761-2819
1
1
1
1
1
►www.tmgindustrial.com P4 / 17 Toll Free: 1-877-761-2819
Installation Requirements
Install the sauna on a completely level floor.
Do not spray the exterior with water. If the floor is damp, install a floor separator to keep
the sauna high & dry.
Do not store flammable objects or chemical substances near the sauna.
The sauna must be placed indoors and in a dry area. Moisture will cause damage to the
interior and exterior of the sauna.
Assembly Instructions
Assembly of the sauna requires at least 2 adults to complete. Please read
the instructions thoroughly before and during assembly to ensure proper
installation of the sauna.
Step 1: LOCATION OF SAUNA
When you find a good location for your sauna, please notethe following.
The main power cord on the sauna must be easily accessible.
The location must be dry and leveled.
Step 2: PLACING BOTTOM PANEL
Place the bottom panel on the floor. Make sure that the FRONT direction of your sauna
room.
1
1
►www.tmgindustrial.com P5 / 17 Toll Free: 1-877-761-2819
Step 3: CONNECTING THE BACK PANEL TO BOTTOM PANEL
Attach the back panel to the bottom panel by lining up the back panel on the bottom panel.
(Please hold the back panel until one of the side-panel had been installed.)
Step 4: CONNECTING SIDE PANELS WITH BACK PANEL
Align the side panels with back panels’ corresponding outside-buckles. Make sure the
outside-buckles on both side panels and fixed in place.
►www.tmgindustrial.com P6 / 17 Toll Free: 1-877-761-2819
Step 5: INSTALLING THE BENCH HEATER
Slide down the bench heater panel by lining up its sides with the vertical guides on side
panel.
1. The heater grill is facing outward (toward the front of the sauna).
2. Push the bench heater panel all the way down until it is touching the bottom panel and
securely in place.
Step 6: CONNECT THE WIRE OF BENCH HEATER AND THE FLOOR
HEATER
Connect the wire of bench heater and floor heater to the back panel.
►www.tmgindustrial.com P7 / 17 Toll Free: 1-877-761-2819
Step 7: INSTALLING THE BENCH
1. Install the bench by sliding it over the horizontal bench guides on the side panels.
2. Push the bench all the way in until it can touch the back panel and is securely in place.
Step 8: CONNECTING THE FRONT PANEL TO SIDE PANEL
►www.tmgindustrial.com P8 / 17 Toll Free: 1-877-761-2819
Step 9: PLACING TOP PANEL
Lower the roof panel onto the assembled panels.
1. Gently place the top panel onto the rest of the assembled panels. When four corners
are in place, gently push down the roof panel from the outside corners until it is snugly
fit over the rest of panels.
2. Make sure the cables do not get pinched between the panels.
3. Leading the wires of heaters onto the board through the corresponding hole.
4. Fix the roof panels by 8 screws to make sure it is stable enough.
►www.tmgindustrial.com P9 / 17 Toll Free: 1-877-761-2819
Step 10: THE MAIN POWER CONNECTION ON THE ROOF PANEL
1. Connect all the wires for heaters.
2. Connect the control panel wires.
3. Check if all connections to the control box are secure.
Step 11: INSTALLING DOOR HANDLE
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere TMG Sanitärprodukte Handbücher
