Toa AM-CF1B Benutzerhandbuch

SETUP MANUAL

Thank you for purchasing TOA’s Integrated Audio Collaboration System.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

INTEGRATED AUDIO COLLABORATION SYSTEM

AM-CF1B, AM-CF1W

TABLE OF CONTENTS

1. OVERVIEW OF SYSTEM SETTINGS ................................................... 3

2. SYSTEM REQUIREMENTS ........................................................................ 3

3. CONNECTIONS ................................................................................................. 4

4. SETTINGS ............................................................................................................. 5

4.1. Settings Screen Switching ..................................................................................... 5

4.2. Mixer Screen Settings ........................................................................................... 5

4.3. How to Set the Audio Settings Screen .................................................................. 9

4.4. Preset Data Loading and Storage Screen Settings ............................................ 11

4.5. Configuration Settings ........................................................................................ 12

1. OVERVIEW OF SYSTEM SETTINGS

Connecting the AM-CF1 unit to a PC by way of a LAN cable allows the following function settings and

maintenance to be performed using the PC’s browser:

[Unit Settings]

• Network settings

• Clock settings

• User account settings

• Bluetooth® name settings

• Key lock setting

[Operation Settings]

• Volume adjustment and current value conrmation of various audio inputs and outputs

• EQ parameter adjustment

• Settings for microphone sound collection

• Echo and noise cancellation settings

• Operation settings for control input and output terminals by contact input and output signals

• Operation setting for the multifunction indicators

• Saving and reading of the above setting data

[Maintenance Function]

• Firmware update

2. SYSTEM REQUIREMENTS

PC hardware requirements are as follows:

Display 1366 x 768 resolution or higher

Conrmed PC operation environments are as follows:

OS Windows 10, 64-bit

macOS 10.4.3 Mojave

Browser Google Chrome 72.0.3626.81, Safari 12.0.3

3. CONNECTIONS

Step 1. Start up the web browser and enter “Unit’s IP address” in the address eld.

Example: 192.16 8.14.1

The login screen is displayed.

Tip: The IP address is factory-preset to “192.168.14.1”.

Step 2. Enter a user name and a password.

The mixer screen is displayed.

Note

Do not launch multiple web browsers at the same time.

Tip

Default user name and password are as follows:

User name: amcf1

Password: amcf1guest

4. SETTINGS

4.1. Settings Screen Switching

Click the following screen name or icon to switch the settings screen to the desired screen. Perform necessary

settings on each screen.

Screen Name or Icon Setting Contents

Mixer screen (Mixer) Used to set input and output gains, etc. Equalizer settings are possible

for both speaker and AUX outputs. (See below.)

Audio settings screen (Audio

Setting)

Used to set microphone collection sound parameters, echo cancellers

and noise cancellers. (See p. 9.)

Preset data loading and storage

screen (Preset Load/Store)

Used to perform settings regarding the methods of loading and storing

preset data. (See p. 11.)

Conguration icon Used to perform settings related to networks, contact control/front

panel LED indication and day and time/rmware update. (See p. 12.)

4.2. Mixer Screen Settings

(1) Input signal adjustment section (INPUT)

Perform settings related to input signals.

The following four input types are made available:

USB

Bluetooth

CODEC

AUX

Name Description

AInput gain display Input gains are displayed numerically.

Numerical values can be changed with the arrows to the right of each value.

Initial setting: 0 dB

Tip: Linked to faders (C).

BInput level indicators Display input levels.

CFaders Used to change input gains.

Tip: Linked to input gain display (A).

DMute button Click to mute corresponding input. Clicking again returns input to the previous

level.

EReset button Click to return all input adjustment settings to their initial settings.

(2) Output signal adjustment section (OUTPUT)

Perform settings related to output signals.

Settings for the following ve types of output can be performed:

Speaker

USB

Bluetooth

CODEC

AUX

Name Description

F EQ button Performs equalization on both speaker and AUX outputs. Clicking this button

opens the Equalizer Screen. (See p. 7.)

GOutput gain display Output gains are displayed numerically. Numerical values can be changed

using the arrows to the right of each value.

Initial setting as follows:

Speaker, USB, CODEC, AUX: 0 dB

Bluetooth: –20 dB

Tip: Linked to faders (I).

H Output level indicators Display output levels.

IFaders Used to adjust output gains.

Tip: Linked to output gain display (G).

JMute button Click to mute corresponding output. Clicking again returns output to the

previous level.

KReset button Click to return all output adjustment settings to their initial settings.

(3) APPLY button

Click this button after all settings on this screen are completed. Setting contents are applied.

[Equalizer Settings]

Clicking the EQ button (see the previous page) displays the equalizer screen.

Both speaker and AUX outputs allow equalizer settings on 5 points and PEQ (parametric equalizer) parameters

can be set on all of the 5 points. In addition, PEQ or HPF (high-pass lter) settings can be performed on the

leftmost point, and PEQ or LPF (low-pass lter) settings can be performed on the ringhtmost point.

(Example: Speaker Output Equalizer Screen)

(1) Back icon

Clicking this icon returns the screen to the Mixer Screen.

(2) EQ curve display section

EQ curves are displayed depending on parameter settings.

(3) PEQ/HPF setting section

Used to set PEQ or HPF parameters.

Name Description

APEQ/HPF selection Select the parameter type (PEQ or HPF).

Initial setting as follows:

Speaker output: HPF

AUX output: PEQ

BParameter settings Set parameters for Freq (frequency), Gain and Q.

The setting range and initial settings are shown in the table below.

Note: Gain and Q cannot be set if HPF is selected in the PEQ/HPF selection.

[Setting Ranges and Initial Settings]

Setting Item Setting Contents Setting Range Initial Setting

Speaker Output AUX Output

PEQ Freq (Hz) 20 to 20000 300 200

Gain (dB) –15 to 15, 0.5 dB steps 0 0

Q0.267 to 69.249 0.718 4.318

HPF Freq (Hz) 20 to 20000 300 200

3 4 5

BC D E

(4) PEQ setting section

Set Frequency, Gain and Q parameters.

The setting range and initial settings are as shown in the table below:

Setting Item Setting Contents Setting Range Initial Setting

Speaker Output AUX Output

PEQ Freq (Hz) 20 to 20000 C: 300

D: 600

E: 4000

C: 630

D: 1600

E: 4000

Gain (dB) –15 to 15, 0.5 dB steps C: –6

D: –3

E: 8

C: 0

D: 0

E: 0

Q0.267 to 69.249 C: 4.318

D: 4.318

E: 2.145

C: 4.318

D: 4.318

E: 4.318

(5) PEQ/LPF setting section

Used to set PEQ or LPF parameters.

Name Description

APEQ/HPF selection Select the parameter type (PEQ or LPF).

Initial setting: PEQ

BParameter settings Set parameters for Freq (frequency), Gain and Q.

The setting range and initial settings are shown in the table below.

Note: Gain and Q cannot be set if LPF is selected in the PEQ/HLPF selection.

[Setting Ranges and Initial Settings]

Setting Item Setting Contents Setting Range Initial Setting

Speaker Output AUX Output

PEQ Freq (Hz) 20 to 20000 10000 10000

Gain (dB) –15 to 15, 0.5 dB steps 0 0

Q0.267 to 69.249 4.318 4.318

HPF Freq (Hz) 20 to 20000 10000 10000

(6) Reset button

Click this button to change the values (3) – (5) of speaker output and AUX output, respectively, as follows:

Setting Item Setting Contents (3) PEQ/HPF setting

section (4) PEQ setting section (5) PEQ/LPF setting

section

PEQ Freq (Hz) 200 C: 630

D: 1600

E: 4000

10000

Gain (dB) 0 C: 0

D: 0

E: 0

Q4.318 C: 4.318

D: 4.318

E: 4.318

4.318

(7) APPLY button

Click this button after all settings on this screen are completed. Setting contents are applied.

4.3. How to Set the Audio Settings Screen

Perform settings related to microphone sound collection.

(1) Tracking Field

Set the range of sound source tracking with the microphone position (AM-CF1) as a reference. Use distances

to the left and right from the center of the microphone position (AM-CF1) and the distance directly in front

of the microphone to set the range.

Name Description

ARange display The sound source tracking range is displayed in orange.

BX1 axis setting Set the distance from the microphone position in the direction of the X1 axis.

Setting range: 0 to 300 cm (0 to 120 inch)

Initial setting: 200 cm (80 inch)

C X2 axis setting Set the distance from the microphone position in the direction of the X2

axis.

Setting range: 0 to 300 cm (0 to 120 inch)

Initial setting: 200 cm (80 inch)

DShortest distance setting Set the shortest distance in front of the microphone position.

Setting range: 20 to 590 cm (8 to 236 inch)

Initial setting: 20 cm (8 inch)

EFarthest distance setting Set the farthest distance in front of the microphone position.

Setting range: 30 to 600 cm (12 to 240 inch)

Initial setting: 400 cm (160 inch)

F Unit selection Click to set the unit of distance to either centimeters (cm) or inches. The

selected unit is displayed in orange.

Initial setting: cm

(2) Tracking Sensitivity

Set the sensitivity to be used to specify a sound source.

Setting range: Low, Mid and High

Initial setting: Mid

GHI

J K

(3) Steering Mode

Set whether or not to track a sound source by clicking “Auto” or “Fixed.”

The set mode is displayed in orange.

“Auto”: Select this when tracking the sound source.

“Fixed”: Select this when the sound source position is xed and thus not being tracked.

Initial setting: Auto

(4) Echo Canceller (AEC)

Name Description

GON/OFF switching Turns the [AEC] (Acoustic Echo Canceller) mode ON or OFF.

The selected mode is displayed in orange.

Initial setting: ON

H NLP Level setting Sets the setting level for Non-Linear AEC processing.

Setting range: Low, Mid, High

Initial setting: Mid

I Microphone Gain setting Sets the output volume level of the beam steering microphone.

Setting range: –6, –4, –2, 0, 2, 4 and 6 dB

Initial setting: 0 dB

(5) Noise Cancellation

Name Description

JON/OFF switching Turns the noise cancellation mode ON or OFF.

The selected mode is displayed in orange.

Initial setting: ON

KAttenuation setting Sets the amount of noise attenuation in dB.

Setting range: 6, 9 and 12 dB

Initial setting: 9 dB

(6) APPLY button

Click this button after all settings on this screen are completed. Setting contents are applied.

Andere Handbücher für AM-CF1B

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toa Konferenzsystem Handbücher

Toa

Toa TS-D1000 Series Bedienungsanleitung

Toa

Toa TS-D1000 Series Bedienungsanleitung

Toa

Toa TS-910 Series Bedienungsanleitung

Toa

Toa TS-700 Betriebsanleitung

Toa

Toa AM-CF1B Bedienungsanleitung

Toa

Toa TS-910 Series Bedienungsanleitung

Toa

Toa TS-801 Bedienungsanleitung

Toa

Toa TS-770 Handbuch

Toa

Toa IP-1000 Series Bedienungsanleitung

Toa

Toa TS-780 Bedienungsanleitung

Toa

Toa TS-910 s Bedienungsanleitung

Toa

Toa TS-821 Bedienungsanleitung

Toa

Toa TS-801 Bedienungsanleitung

Toa

Toa TS-800 Series Bedienungsanleitung

Toa

Toa TS-920 Series Bedienungsanleitung

Toa

Toa TS-920RC Bedienungsanleitung

Toa

Toa TS-911 Bedienungsanleitung

Toa

Toa Venas VM-2120 Bedienungsanleitung

Toa

Toa YW-1022 Bedienungsanleitung

Toa

Toa TS-700 Bedienungsanleitung

Toa

Toa TS-800 Series Bedienungsanleitung

Toa

Toa AM-1 Bedienungsanleitung

Toa

Toa TS-900 Series Bedienungsanleitung

Toa

Toa TS-D1000-CU Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung

AXIWI

AXIWI AT-350 Bedienungsanleitung