Toa WM-5420-AS Bedienungsanleitung

OPERATING INSTRUCTIONS

Press-to-Talk Wireless Microphone

WM-5420

TABLE OF CONTENTS

1. SAFETY PRECAUTIONS ........................................................................................................... 2

2. GENERAL DESCRIPTION ......................................................................................................... 3

3. FEATURES.................................................................................................................................. 3

4. HANDLING PRECAUTIONS ...................................................................................................... 3

5. NOMENCLATURE AND FUNCTIONS ....................................................................................... 4

6. BATTERY INSERTION ............................................................................................................... 5

7. CHANNEL NUMBER SETTING.................................................................................................. 6

8. OPERATION................................................................................................................................ 6

9. A/B SWITCH FUNCTION AND USAGE METHOD .................................................................... 7

10. TALK SWITCH SETTING ......................................................................................................... 8

11. CHIME SETTING....................................................................................................................... 8

12. MICROPHONE SENSITIVITY SETTING .................................................................................. 9

13. WHEN USING EXTERNAL MICROPHONE............................................................................. 9

14. USING POCKET CLIP .............................................................................................................. 10

15. TROUBLESHOOTING .............................................................................................................. 11

16. FREQUENCY TABLE ............................................................................................................... 11

17. CERTIFICATIONS..................................................................................................................... 12

18. SPECIFICATIONS..................................................................................................................... 12

Accessories.................................................................................................................................. 12

Optional products......................................................................................................................... 12

Thank you for purchasing TOA Press-to-Talk Wireless Microphone.

Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

WARNING

CAUTION

1. SAFETY PRECAUTIONS

Be sure to read the instructions in this section carefully before use.

Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded as

very important precautions are included.

We also recommend you keep this instruction manual handy for future reference.

Indicates a potentially hazardous situation which, if mishandled, could

result in death or serious personal injury.

To prevent the electromagnetic wave from badly influencing medical equipment,

make sure to switch off the unit's power when placing it in close proximity to the

medical equipment.

Prohibited

Indicates a potentially hazardous situation which, if mishandled, could

result in moderate or minor personal injury, and/or property damage.

When the unit is not in use for 10 days or more, be sure to take the battery out of the unit because

battery leakage may cause personal injury or contamination of environment.

Make sure to observe the following handling precautions so that a fire or personal injury does not

result from leakage or explosion of the battery.

· Do not short, disassemble heat nor put the battery into a fire.

· Do not solder a battery directly.

· Be sure to use the specified type of battery.

· Note correct polarity (positive and negative orientation) when inserting a battery in the unit.

· Avoid locations exposed to the direct sunlight, high temperature and high humidity when storing

batteries.

When the battery becomes inflated or leaks, discontinue use and replace with new one immediately.

CAUTION TO USER: Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

Compulsory

2. GENERAL DESCRIPTION

WM-5420 is a multifunctional press-to-talk wireless microphone, employing a unidirectional condenser microphone unit.

3. FEATURES

An optimized PLL-synthesizer minimizes the oscillation frequency drift resulting from the ambient temperature or

voltage fluctuation.

Locking the talk switch and switchable the microphone sensitivity allows the hands-free usage..

Employs a chime function.

Transmitter channels may be configured with various functions to be used for different purposes.

Equipped with external microphone input. It is available to turn on/off using the switch on the external microphone.

Curved shape fits into user’s hand

Power/Battery lamps indicate battery consumption to prevent the unit from malfunctioning when the battery level

remarkably decreases.

Operates on a single AA battery..

Antimicrobial surface treatment.

Employs a built-in antenna.

4. HANDLING PRECAUTIONS

Do not expose the unit to rain or an environment where it may be splashed by water or other liquids, as doing so may

result in unit failure.

Never open nor remove the unit case to modify the unit. Refer all servicing to your nearest TOA dealer.

Take care not to drop the unit onto the floor nor bump it against a hard object as the unit could fail.

Do not place the unit in locations of high temperature (ex. in an ill-ventilated car in summer) or high humidity as the unit

could fail.

Do not use the unit in locations where it is exposed to seawater.

To clean, use a dry cloth. When the unit gets very dirty, wipe lightly with a cloth damped in a dilute neutral cleanser,

then wipe with a dry cloth. Never use benzine, thinner, or chemically-treated cleaning towel.

Avoid using a mobile telephone near the wireless microphone in use. Noise could be picked up.

When using two or more wireless microphones, keep them at least 50 cm away from each other to avoid malfunctions

or noise.

Keep the wireless microphone at least 3 m away from the receiving antenna. Using the microphone in close proximity

to the antenna could result in malfunctions or noise.

5. NOMENCLATURE AND FUNCTIONS

1. Power / Battery lamps

A green LED lights as long as the battery capacity is

sufficient. When the battery capacity becomes low, the

green LED starts to dim, while the red LED to light.

The microphone does not transmit the signal if the channel

selector switch is set to the empty channel. In this case,

the red LED and green LED flash alternately.

2. Microphone

3. External microphone connector φ3.5 mini-jack

Remove cover before use.

[Top]

[Right side]

[Rear][Front]

[Left side]

[Bottom]

[Inside battery cover]

Function Default setting

A/B switch

Talk switch (lock) OFF

Chime OFF

Microphone sensitivity Low

4. Talk switch

Use this switch to turn microphone on/off. Press

the switch to talk. Settings may be changed.

5. A/B switch

Modes A and B are settings for different

combinations of channels and functions. Either

mode A or B may be chosen. The default is

mode A.

6. Neck strap

Strap provided is to be fitted here.

7. Settings for various functions

Including locking talk switch, chime and

microphone sensitivity.

8. Bank setting switch

9. Channel setting switch

10. Battery compartment

BASIC USAGE

When the unit is purchased in its new condition

(refer to table on the right), it may be used once

battery is inserted, and the group number and

channel number set.

6. BATTERY INSERTION

Step1. Press on the battery cover while sliding it in the

direction of the arrow and remove the cover.

Step2. Insert a AA dry-cell battery according to the (+)

and (-) signs in the battery compartment.

Step3. Replace battery cover.

Battery replacement

A brand-new AA alkaline battery will continuously

operate the unit for about 10 hours.

When the battery capacity becomes low, the

green LED of the Power/Battery lamps starts to

dim, while the red LED to light. When only the red LED

lights, replace the battery with a new one.

WM-5420 top Power/Battery lamp (red)

7. CHANNEL NUMBER SETTING

Note

Setting should be done when talk-switch is off.

If you change setting when the power is on, the transmission frequency will not be changed.

Refer to the frequency table when setting. If you configure a bank or channel that is not on the frequency table, signals

will not be transmitted. When the setting is incorrect or done improperly, the red and green indicators of the

power/Battery lamps will blink alternately, indicating an error. Check again and reconfigure your setting.

Step1. Turn off the talk-switch. Remove battery cover.

Step2. Using the supplied screwdriver, set the BANK setting switch to

the desired bank number.

Step3. Using the supplied screwdriver, set the CHANNEL setting

switch (A) and (B) to the desired channel number.

* If not using the A/B switch function, set (A) and (B) to the

same channel.

Step4. Replace the battery cover.

8. OPERATION

Step1. Confirm that the wireless microphone and the wireless tuner are identical in the channel number. If not identical,

turn off the talk switch, then set the channel number to the same channel number as the tuner.

Step2. Press talk switch to turn on the wireless microphone.*

Both green and red indicators on the Power/Battery lamps will flash and

either green or red indicator will remain lit depending on battery power,

microphone is then turned on.

Step3. After use, press talk switch to turn off microphone.*

*When talk switch is set as “unlocked” (default setting), it will only be on when it

is pressed and off when released.

When it is set as “locked”, press once for on and press again for off.

WM-5420 top Power/Battery lamp (red)

Power/Battery lamp (green)

Inside battery cover

BANK setting

CHANNEL

setting (A)

CHANNEL

setting (B)

(Default settings are all 1)

Talk-switch

Power/Battery lamp

CONVENIENT FUNCTIONS

Switches inside battery cover, accessories and optional purchase provide convenient functions.

Note

Setting should be done when talk-switch is off.

After removing battery cover, use the supplied screwdriver or any screwdriver with a pointed tip to change settings.

9. A/B SWITCH FUNCTION AND USAGE METHOD

WM-5420 sets different combinations of channels

and functions as mode A or mode B. By switching

the A/B modes, one microphone can be used in

two different ways. The following may be

configured differently for mode A and mode B:

Channel number

Talk switch option

Chime option

Microphone sensitivity option

* All other settings except those above are

common for both modes.

[Operation]

Step1. Slide the A/B switch to choose “A” or “B”.

Step2. Press talk switch to turn on microphone.

Note

Setting A/B mode should be done when talk-switch

is off. If talk-switch is on, the mode will not change.

If only one mode is required, it is recommended that

both mode A and mode B are configured identically.

(Default setting is A)

Inside battery cover

[A] mode

[B] mode

[A] mode

[B] mode

A/B setting

B setting

A setting

10. TALK SWITCH SETTING

This function is the setting for the talk-switch ON/OFF.

Select lock option using talk-switch inside battery cover and set A/B mode.

Note

Setting should be done when talk-switch is off.

If talk-switch is on, the setting will not change.

11. CHIME SETTING

Choose whether to enable chime when microphone is turn on.

Select chime option inside battery cover and set A/B mode.

Note

Setting should be done when talk-switch is off. If talk-switch is on, the setting will not change.

LOCK OFF/ON

Talk switch setting

(Default setting is off)

Inside battery cover

LOCK OFF Disable push lock function

Microphone is on when talk-switch is pressed and off when it is released.

LOCK ON Enable push lock function

Press talk-switch once to turn on microphone and press again to turn it off.

CHIME OFF When talk-switch is on, chime is disabled.

CHIME ON When talk-switch is on, chime is enabled.

Talk-switch

CHIME OFF/ON

Chime setting

(Default setting is off)

Inside battery cover

12. MICROPHONE SENSITIVITY SETTING

Select microphone input sensitivity (including external microphone) according to type of use.

Select microphone input sensitivity switch inside battery cover and set A/B mode.

Note

Setting should be done when talk-switch is off. If talk-switch is on, the setting will not change.

Note

Do not hold microphone too close to the mouth, otherwise the sound will be unclear, causing discomfort to the listeners.

13. WHEN USING EXTERNAL MICROPHONE

CONNECTING TO EXTERNAL MICROPHONE

Compatible with other optional microphones (YP-M101, YP-M201, YP-M301).

Remove cover, insert φ3.5 mini jack into the external microphone, built-in

microphone will be turned off and the external microphone can be available.

*Refer to the microphone sensitivity setting.

SETTING EXTERNAL MICROPHONE

The optional microphone YP-M201 has the talk-switch. This can be available

to turn on/off WM-5420. Select external microphone function using external

microphone switch inside battery cover.

Note

Setting should be done when internal and external talk-switch is off.

*No setting is required if not using external microphone.

MIC SENSE Lo Decreasing microphone input sensitivity

Decrease microphone input sensitivity when microphone is used in close to

the mouth (approximately 2~3cm).

MIC SENSE Hi Increasing microphone input sensitivity

Increase microphone input sensitivity when microphone is placed inside the

pocket or is held further away from the mouth (approximately 15~20cm).

MIC SENSE Lo/Hi

Microphone sensitivity switch

(Default setting is off)

Inside battery cover

Talk-switch

external microphone’s input

WM-5420 internal talk-switch is available.

Use this setting if the optional microphone without talk-

switch is used.

The external talk-switch on the optional microphone is

not available.

The external talk-switch on the optional microphone is

available.

WM-5420 internal talk-switch is also available to turn

on/off using talk switch. However, if either one of

internal or external talk-switch is turned on, it is not

available to turn off by the other talk-switch.

Note

If the external microphone function is set to “on”, WM-5420 will sometimes turn on when the external microphone is

being plugged or unplugged.

Check if WM-5420 is on/off using Power/Battery lamps when plugging or unplugging external microphone. When WM-

5420 is on, use the talk-switch on WM-5420 or the external microphone to turn “off”.

14. USING POCKET CLIP

Attach the supplied clip and hold in the pocket, hands-free operation is available.

ATTACH THE CLIP

Note

Select the microphone sensitivity “Hi”, when WM-5420 is used holding in the pocket.

External microphone Off

External microphone On

External microphone switch

(Default setting is off)

Screw M3x5

(accessories)

Pocket Clip (accessory)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toa Mikrofon Handbücher

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung