Toa D-2012AS Programmierhandbuch
Thank you for purchasing TOA's Console Case.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
D-2012ASCONSOLE CASE
ASSEMBLING MANUAL
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
1. SAFETY PRECAUTIONS
Be sure to follow all the precautionary instructions in this section, which contain important cautions regarding
safety.
After reading, keep this manual handy for future reference.
• Avoid touching the decorative panel's sharp metal edge to prevent injury.
2. GENERAL DESCRIPTION
The D-2012AS Console Case is a desk mount kit for the D-2012C Remote Console Unit, which includes an
armrest, side and decorative panels.
3. COMPONENT PARTS
Side panel R
Machine screw
M4 x 25 (with washer):
11 pieces
Decorative panels
Machine screw M4 x 10:
4 pieces
Rubber foot: 4 pieces
Armrest
Side panel L
4. HOW TO ASSEMBLE
Step 1. Remove 3 screws on each side of
the D-2012C to detach the rack
mounting brackets.
The removed screws are not
used.
D-2012C
Rack mounting bracket
5. SPECIFICATIONS
Note: The design and specifications are subject to change without notice for improvement.
Finish Side panels: MDF, paint, black, mat finish
Armrest: MDF, leather upholstery, black, mat finish
Decorative panels: Stainless steel, silver
Dimensions 505 (w) x 127.5 (h) x 333.4 (d) mm or 19.88" x 5.02" x 13.13" (assembled)
Weight 2.3 kg or 5.07 lb (this product only), 7.5 kg or 16.54 lb (assembled)
133-22-164-60
URL: http://www.toa.jp/
Step 2. Attach the 4 rubber feet to the bottom surface of the D-
2012C using the 4 supplied screws.
Be sure to attach the rubber feet, as the air vents are
provided at the bottom surface.
Step 3. Attach the side panel L to the left side of the D-2012C
and side panel R to its right side with 2 each screws.
Step 4. Fit each decorative panel into the holes on the side
panels L and R, then secure them with 2 each screws
from the side panels inside.
Rubber foot*
Machine screw
M4 x 10*
Step 5. Attach the armrest to the D-2012C's front panel with 3 screws.
Side panel L*
Side panel R*
Machine screw M4 x 25
(with washer)*
Decorative panel*
Machine screw M4 x 25
(with washer)*
3
4
Machine screw
M4 x 25
(with washer)*
[Finished assembly]
Armrest*
* Component parts of the D-2012AS.
Inhaltsverzeichnis
Andere Toa Musikmixer Handbücher
Toa
Toa D-2008SP Bedienungsanleitung
Toa
Toa RX-7-248 Bedienungsanleitung
Toa
Toa M-9000 Bedienungsanleitung
Toa
Toa M-1212E Bedienungsanleitung
Toa
Toa D-901 Bedienungsanleitung
Toa
Toa M-864D Bedienungsanleitung
Toa
Toa RX-31C Bedienungsanleitung
Toa
Toa RX-208 Bedienungsanleitung
Toa
Toa D-901 Bedienungsanleitung
Toa
Toa Q-D-2012C Bedienungsanleitung
Toa
Toa MX-401 Bedienungsanleitung
Toa
Toa D-901 Bedienungsanleitung
Toa
Toa D-2012C Bedienungsanleitung
Toa
Toa D-901 Systemhandbuch
Toa
Toa CX-124 Bedienungsanleitung
Toa
Toa D-901 Bedienungsanleitung
Toa
Toa D-2008SP Bedienungsanleitung
Toa
Toa M-243 Bedienungsanleitung
Toa
Toa MX-628 Bedienungsanleitung
Toa
Toa D-901 Gebrauchs- und Pflegehandbuch
