CLEANING & DESCALING
The descaling process will remove deposits of calcium and other minerals in the system that may
aect its performance.
CLEANING
Turn o at the power supply, unplug the unit and allow unit to cool down completely before
cleaning. Before first use and after every use wash the jug, lid and basket in warm soapy water or use
a dishwasher (top shelf only) and dry thoroughly. Wash the blade, sealing ring and locking ring in
warm soapy water and dry thoroughly.
PLEASE NOTE THE BLADE, SEALING RING AND LOCKING RING ARE NOT DISHWASHER SAFE.
WARNING! Handle the blade carefully as it is extremely sharp. Care shall be taken when handling the
sharp blades, emptying the jug and during cleaning. After every use wipe the jug housing with a
damp cloth but do not submerge in water. Do not clean with abrasive cleaners or allow to come in to
contact with solvents or harsh chemicals, damage could result.
DESCALING
You should descale the water tank of your Baby Food Maker every 4 weeks, however if you notice
limescale earlier, descaling may be required sooner. Unplug the unit and allow to cool before
cleaning. After each use allow to cool before pouring away remaining water from the water tank
by tipping the unit sideways over a sink. A build up of limescale can negatively aect the
performance of the unit. Living in a hard water area can produce limescale quicker than other areas
therefore descaling is required sooner. Use a descaler that is suitable for use with stainless steel and
use as per the manufacturer’s guidelines. Alternatively you can use white vinegar to descale your
unit, please use as per manufacturer’s guidelines. Once you have descaled then follow instructions
under SET UP to perform a final cleaning cycle. You may need to repeat the process if you find that
limescale is still present. DO NOT use metal objects or scourers to clean your unit. DO NOT use
bleach to clean the unit. DO NOT use abrasive or anti-bacterial materials.
TROUBLESHOOTING
1.
•
Do not use the unit for anything other than the intended use. This unit is not suitable for
•
Cooking rice, noodles and pasta
• Chopping hard ingredients such as ice cubes and sugar lumps
• Cooking frozen foods
2.
Do not use before water tank is filled with water, unless using the blend only cycle
3.
During the automatic steam and blend cycle, the blades will turn to circulate the food. The unit
is designed to do this and is a normal part of cycle.
4.
Once a steam and blend, steam only or blend only cycle has been set, if the jug has not been
assembled correctly and the start button is pressed to start a cycle, a beep will sound.
5.
The unit will not start operating if the lid is not placed on the jug before locking into place
(Error Code E2), if the lid has not been placed on the jug in the correct orientation (Error
Code E2), or if the basket has not been placed in the jug correctly. (Error Code E2).
6.
If the jug is loosened or removed from the unit during a cycle, it will automatically stop, a beep
will sound and (Error Code) E2 will be displayed. The cycle will be paused and the unit
will return to standby state until the jug is put back and fixed in place, to continue the
cycle, press start button.
7.
(Error Code E1) In the unlikely event that the water tank boils dry during steaming the unit
will beep and the LCD will display error E1. If this occurs you will need to re-start the cycle and
replace the food. Unplug the unit, allow the unit to stand for 2 minutes before filling the water
tank with 350ml of cold water. Re-set cycle following the instructions in the usage section.
8.
Quickly set the timer by holding down the + and - buttons (Pictures 9 and 10).
9.
If you find that your machine is not working as eciently as it was, we would
recommend carrying out the descaling process as there may be a build-up of limescale.
10.
Do not use the Baby Food Maker without food in the jug or steaming basket, except for the
sterilising programme. If this happens press the cancel button.
11.
If the unit stops working during operation or after it’s been used for longer cycles, please
disconnect the unit from the main power supply and let it cool down for 10 minutes
before using it.
