TomTom LINK 530 Bedienungsanleitung

TomTom LINK 530

Installation Guide

Contents

What’s in the box 4

Read me first 5

Congratulations ..................................................................................................................................5

What you need for the installation ....................................................................................................5

Safety first 6

Important safety notices and warnings .............................................................................................6

Updating the LINK 530 8

System Requirements ........................................................................................................................8

Preparations........................................................................................................................................8

Updating the firmware on your LINK 530 .........................................................................................8

Using the XP Compatibility mode ...................................................................................................11

Activating the LINK 530 12

Connection overview 15

Choosing the correct position 16

Connecting to power 17

Mounting the LINK 530 18

Attaching the holder using the adhesive strips ..............................................................................18

Attaching the holder using self-tapping screws .............................................................................19

Attaching the holder using cable ties ..............................................................................................19

Testing operation 21

Power or Ignition test .......................................................................................................................21

Mobile network reception test .........................................................................................................21

Connecting to PRO and WEBFLEET 22

Diagnostics 24

Monitoring operation .......................................................................................................................24

Support .............................................................................................................................................25

Resetting the LINK 530 26

Restarting your LINK ........................................................................................................................26

Resetting your LINK to factory settings...........................................................................................26

Technical data 27

Appendix: Using external antenna 29

Mounting the external GPS antenna ...............................................................................................29

Mounting the external mobile network antenna.............................................................................30

Appendix: Using the IO cable 32

Using the input IN 1 for idle time reporting ....................................................................................32

Using the input IN 1 for changing the logbook mode ....................................................................32

Wiring digital inputs .........................................................................................................................33

Wiring the digital output ..................................................................................................................34

Addendum 35

TomTom LINK 530

1. Yellow LED - connection status indicator.

2. Green LED - system status indicator.

3. Connector (SMB) for optional external GSM antenna.

4. Service/Update Mini-USB-cable connector.

5. Power cable connector.

6. Reset button.

7. IO-Cable connector.

8. Connector (SMB) for optional external GPS antenna.

Power cable

Holder

Fixings - 2 adhesive strips and a cleaning tissue

What’s in the box

Congratulations

You have chosen the TomTom LINK 530, a core hardware component from TomTom WORKsmart

fleet management solutions. With WORKsmart from TomTom Business Solutions you are always

connected to your people out on the road in a smart and easy way.

TomTom LINK 530 is a GPS receiver and mobile network module in one unit, always providing the

vehicle’s current position.

When used with a compatible TomTom navigation device*, you can easily handle orders, as well

as text and status messages. You can receive traffic information, and you are warned when you

are driving or cornering too fast. And you can get information about how much fuel you have

used.

What you need for the installation

Before starting the installation of your TomTom LINK 530, read the safety notices and warnings

carefully and make sure you have the following:

The TomTom WEBFLEET Contract Confirmation letter including the Activation Code.

All parts contained in the box.

A connection to the vehicle’s power supply that is fused with max. 10A.

A place with a clear view of the sky where you can move your vehicle to check GPS recep-

tion.

A TomTom navigation device that is compatible with TomTom LINK 530* - optional.

* To check compatibility please visit business.tomtom.com/products

Read me first

Important safety notices and warnings

Important: Read the following safety instructions carefully.

TomTom Business Solutions accept no liability for damage that results from disregarding the

safety instructions.

This document is part of the product. Keep it in a safe place. If you pass the unit on to a new user,

make sure you give them this document as well.

Important - damage caused through improper installation

The installation and initial operation of the unit must be performed by authorised personnel

only for example, a qualified radio dealer or an automotive electronics workshop.

Caution - risk of injury in case of accidents

Do not mount the unit or accessories in the inflation area of airbags or in the impact area for

the head or knees. Choose an installation location that will avoid interference with displays,

safety equipment and controls.

Caution - damage to the chassis

Make sure you do not drill into parts of the chassis that have structural or security-related

functions. This is because you cannot be certain that they will function properly after modifica-

tion.

Caution - risk of fire

Make sure you do not drill into covered wiring harnesses, fuel lines or similar components.

Drilling into these can cause fire.

Caution - use of this product is restricted in some areas

The TomTom LINK 530 contains a mobile network module which can interfere with electrical

devices such as cardiac pacemakers, hearing aids and aviation equipment. Interference with

these devices may endanger the health or life of you or others. If your device includes a mo-

bile network module, do not use it near unprotected electrical units or in areas where the use

of mobile telephones is prohibited, such as hospitals and aircraft.

Caution - danger of explosion

Parts of the TomTom LINK 530 can cause sparks that can lead to explosions. This may en-

danger human health and life. Do not use the unit in areas with high risk of explosion. When

using a TomTom LINK 530 in a vehicle fuelled by liquefied gas, follow the safety regulations of

the country in which the vehicle is operated.

Warning - repair and replacement

Repairs must be carried out by authorised and qualified personnel only. Never replace dam-

aged parts of the unit yourself. Send the defective unit to TomTom Business Solutions for re-

pair. Only the qualified staff of TomTom Business Solutions are authorised to repair or replace

parts.

Warning - damage to the device

Safety first

Short-circuits inside the unit can be caused by contact with water or other liquids. The unit

may be damaged by contact with water. Use and store the unit in an area protected from wa-

ter.

Caution - risk of accidents

Using a TomTom PRO navigation device while driving is distracting and can cause accidents.

To ensure road safety, only enter information in the navigation device when the vehicle is not

being driven.

We recommend updating the firmware on your LINK 530. You can do this by using the Firm-

ware-Update Tool and a Microsoft Windows® computer. A connection to the Internet or TomTom

WEBFLEET is not required.

System Requirements

Before you can use the LINK 530 Firmware-Update Tool, you need the following:

The TomTom LINK 530 Service Set.

A Microsoft Windows computer.

The latest LINK 530 Firmware-Update Tool (firmware is embedded).

The USB driver for TomTom LINK 530 devices.

Preparations

1. Install the USB driver.

This is required to establish a connection between your computer and your LINK 530 using the

USB cable.

You can download the USB driver from the Partner Portal. Install the driver on your computer

by double clicking the .exe file and following the instructions.

2. Install the latest Firmware-Update Tool version.

You can download the latest Firmware-Update Tool from the Partner Portal under Software

and Firmware. You must be logged in to the Partner Portal to download the Tool. The down-

loadable ZIP file contains the tool with the firmware update file embedded. Unzip the down-

loaded file to your local hard disk.

Updating the firmware on your LINK 530

To update the firmware on your LINK 530 using the Firmware Update Tool, do the following:

1. Connect your LINK 530 to a Microsoft Windows® computer using USB.

The first time you connect a LINK 530 to your computer’s USB port, a pop-up window tells you

about the installation of the hardware. Follow the instructions and select automatic installation.

A virtual COM port named TomTom LINK followed by a port number is assigned.

To find out the port number, do the following: Open the Windows Control Panel. Select the

Hardware tab. Select Device Manager. Open the list for Ports (COM & LPT).

2. Start the Firmware-Update Tool by double clicking on the .exe file.

On a computer with Microsoft Windows® Vista or Windows® 7, you must run the tool in

Windows© XP compatibility mode.

Updating the LINK 530

3. Select the COM port that was assigned to your LINK 530 from the list and click OK.

At the bottom of the window you can find information about the operating system installed on

the LINK 530, the serial number of the LINK 530 and which COM Port number was assigned, as

well as the operating system that will be installed with this update.

If the version number of the firmware installed on your LINK 530 is lower than the one includ-

ed in the Firmware-Update Tool, continue with the next ystep. If it is up-to-date, disconnect

your LINK 530 and activate your LINK 530.

4. Select Start to initiate the firmware update installation process.

The old firmware is deleted and the new firmware is installed on the device. During the instal-

lation process the upper part of the window displays the installation progress.

5. When the firmware installation is complete, click OK to confirm.

6. To close the Firmware-Update Tool click Exit.

Inhaltsverzeichnis

Andere TomTom Auto-Navigationssystem Handbücher

TomTom

TomTom Blue&Me-TomTom Bedienungsanleitung

TomTom

TomTom 4PN50 Bedienungsanleitung

TomTom

TomTom GO 510 Installationsanleitung

TomTom

TomTom 4CS03 Bedienungsanleitung

TomTom

TomTom BRIDGE Bedienungsanleitung

TomTom

TomTom Mazda NB1 Bedienungsanleitung

TomTom

TomTom Mazda NB1 Bedienungsanleitung

TomTom

TomTom Go 520 Bedienungsanleitung

TomTom

TomTom Nav Bedienungsanleitung

TomTom

TomTom Go 920 Bedienungsanleitung

TomTom

TomTom GO Montageanleitung

TomTom

TomTom GO 510 Bedienungsanleitung

TomTom

TomTom GO Bedienungsanleitung

TomTom

TomTom GO Bedienungsanleitung

TomTom

TomTom VIO Bedienungsanleitung

TomTom

TomTom Blue&Me TomTom 2 Bedienungsanleitung

TomTom

TomTom RIDER Bedienungsanleitung

TomTom

TomTom GO 620 Kurzanleitung

TomTom

TomTom TRUCKER Bedienungsanleitung

TomTom

TomTom GO Bedienungsanleitung

TomTom

TomTom Mazda NB1 Bedienungsanleitung

TomTom

TomTom GO Bedienungsanleitung

TomTom

TomTom 2015 BRIDGE Bedienungsanleitung

TomTom

TomTom RIDER Bedienungsanleitung

Beliebte Auto-Navigationssystem Handbücher anderer Marken

Clarion

Clarion Navigation In-Car Entertainment Bedienungsanleitung

Rosen

Rosen DP-1001 Bedienungsanleitung

Alpine

Alpine INE-W970HD Bedienungsanleitung

Skoda

Skoda AMUNDSEN+ Bedienungsanleitung

Blaupunkt

Blaupunkt TravelPilot DX-N Bedienungsanleitung

Pioneer

Pioneer MZ360500EX Bedienungsanleitung

Sanyo

Sanyo NVM-4030 - Easy Street - Automotive GPS... Bedienungsanleitung

Kenwood

Kenwood DNN991HD Bedienungsanleitung

AvMap

AvMap Geosat 2C Bedienungsanleitung

Eonon

Eonon GE01B Bedienungsanleitung

Pioneer

Pioneer AVIC-Z920DAB Bedienungsanleitung

Nextar

Nextar M3-MX - Automotive GPS Receiver Bedienungsanleitung

Furrion

Furrion NV2200 Bedienungsanleitung

Mio

Mio MOOV 200-Series Bedienungsanleitung

Prestigio

Prestigio GeoVision 5150 Bedienungsanleitung

Hummer

Hummer 2006 H3 Bedienungsanleitung

Magellan

Magellan Maestro 4210 - Automotive GPS Receiver Konfigurationshandbuch

Garmin

Garmin StreetPilot c510 Bedienungsanleitung