TomTom GO 740 LIVE Bedienungsanleitung

TomTom GO

What’s in the box1.

What’s in the box aTomTom GO AOn/Off button

BMicrophone

CLight sensor

DSpeaker

EMemory card (micro SD card)

slot

bWindshield Mount

cAdhesive disk for Windshield

Mount dUSB car charger

eHome Dock fDocumentation pack

Before you start2.

Before you start

Switching on and off

Install your TomTom GO navigation device in your car following the

instructions in the installation section at the start of this book.

To switch on your navigation device, press and hold the On/Off button until

you see the start-up screen. The first time you switch on your device, it may

take a short time to start.

To set up your device you need to answer a few questions by tapping the

screen.

Device not starting

In rare cases, your TomTom GO navigation device may not start correctly or

may stop responding to your taps.

First, check that the battery is properly charged. To charge the battery,

connect your device to the car charger. It can takeup to 2 hours to fully charge

the battery.

If this does not solve the problem, you can reset the device. To do this, press

and hold the On/Off button for fifteen seconds and release the button when

your device begins to restart.

Battery notes

ThebatteryinyourTomTom GOnavigationdevicechargeswhenyouconnect

it to the car charger or to your computer.

The light next to the On/Off button is orange while the battery is charging and

is green when the battery is fully charged.

When you connect your device to a computer, you are asked if you want to

connect to the computer. If you select No and then do not tap the screen

within three minutes, the devicewill automatically switch off. This happens so

that the battery can charge faster.

Note: You should plug the USB connector directly into a USB port on your

computer and not into a USB hub or USB port on a keyboard or monitor.

Windshield Mount

Use the Windshield Mount to install your TomTom GO inside your car.

Make sure that both the Windshield Mount and your windshield are clean and

dry before you attach the mount. Place the Windshield Mount so that it does

not interfere with your view of the road or of any of the controls in your car.

To attach the Windshield Mount, press the suction cup firmly against the

windshield on an area where the glass is flat. Then twist the rubber grip near

the base of the Windshield Mount in a clockwise direction until you hear a

click.

Home Dock

Thehome dockis usedfor chargingyour TomTom GOwhen itis not in the car

and for connecting your GO to your computer.

When connected to your computer, you can use TomTom HOME to manage

your GO.

GPS reception

When you first start your TomTom GO navigation device, the device may

need a few minutes to determine your GPS position and show your current

position on the map. In future, your position will be found much faster, usually

within a few seconds.

To ensure reception of a strong GPS signal, you should use your device

outdoors. Large objects such as tall buildings can sometimes interfere with

reception.

Important: Some vehicles have heat reflective shielding in the windshield

which may prevent your navigation device from locating your position.

The TomTom External Antenna Kit (available for purchase as an accessory)

can help to improve reception.

Safety Notice

Your TomTom GO contains a GSM/GPRS module which can interfere with

electrical devices such as cardiac pacemakers, hearing aids and aviation

equipment.

Interference with these devices may endanger the health or life of others.

Do not use near unprotected electrical units nor in areas where the use of

mobile telephones is prohibited, such as hospitals and airplanes.

Take care of your device

NeverleaveyourTomTom GOnavigationdeviceoraccessoriesonviewwhen

you leave the car or they may become an easy target for thieves.

It is important to take care of your device.

• Your device is not designed for use in extreme temperatures and any such

exposure may cause permanent damage.

• Do not open the casing of your device under any circumstances. Doing so

may be dangerous and will invalidate the warranty.

• Wipe or dry the screen of your device using a soft cloth. Do not use any

liquid cleaners.

Safety3.

Safety

Choosing where to attach the Windshield Mount

Consider carefully where you place the Windshield Mount in your car. The

Windshield Mount should not block or interfere in any way with the following:

• Your view of the road

• Any of the controls in your car

• Any of your mirrors

• The airbag

You should be able to reach your GO easily when it is in the Windshield Mount

without leaning or stretching. The diagrams show where you can safely attach

the Windshield Mount.

You can attach the Windshield Mount to the windshield, side window or use a

Dashboard Mount Disk to attach the Windshield Mount to your dashboard.

TomTom also offers alternative mounting solutions for your TomTom device.

Formore informationabout DashboardMount Disksand alternativemounting

solutions, go to www.tomtom.com/accessories.

Installing the Windshield Mount

Make sure that both the Windshield Mount and your window are clean and

dry.

1. Press the suction cup firmly against the window onan area where the glass

is flat.

2. Twist the rubber grip near the base of the Windshield Mount in a clockwise

direction until you hear a click.

The Windschield Mount is now installed.

Safety preferences

We recommend using the safety preferences to make your driving as safe as

possible. The safety preferences include, for example, the following options:

• Hide most menu options when driving

• Show safety reminders

• Warn when driving faster than allowed

You can also drive more safely by using voice commands to control your

TomTom GO.

Making your first journey4.

Making your first journey Planning a route with your TomTom GO navigation device is easy. To plan a

route, follow the steps below.

Important: For safety reasons, you should always plan a route before you

start your journey.

1. Tap the screen to bring up the Main Menu.

Note: The buttons on your navigation device are shown in full color unless a

button is currently unavailable. For example, the button named Find

alternative in the Main Menu is not available until you have planned a route.

2. Tap Navigate to...

3. Tap Address.

When you enter an address, you can choose from the following options:

•City center - tap this button to set your destination as the center of a city

or town.

•Street and house number -tapthisbuttontoset anexactaddress as your

destination.

•Zip code - tap this button to enter a zip code as your destination.

Note: You can enter a zip code for any country. In the UK and the Netherlands,

ZIP codes are detailed enough to identify a house on their own. In other

countries you can enter a zip code to identify a town or area. You will then

have to enter a street and house number.

•Cross street or intersection -tapthisbutton tosetyourdestination as the

point where two streets meet.

•Spoken address - tap this button to set your destination by saying the

address to your navigation device.

In this example, we will enter an exact address.

4. Tap Street and house number.

Note: When planning a trip for the first time your navigation device asks you

to choose a state or country. Your choice is saved and used for all routes you

plan.

You can change this setting at any time by tapping the flag.

5. Start to type the name of the town where you want to go.

As you type, the names of the towns that match what you have typed are

shown. When your destination appears in the list, tap the name of the town

to set the destination.

Tip: Instead of typing the name, tap this button to say the address by

speaking to your navigation device.

6. Start to type the street name and tap on the street when itappears in the list.

As with the name of the town, the names of the streetsthat match what you

have typed are shown. When your destination appears in the list, tap the

name of the street to set the destination.

7. Enter the house number and then tap Done.

8. Your navigation device asks if you need to arrive at a particular time. For this

exercise, tap NO.

The route is calculated by your device using IQ RoutesTM.

IQ Routes is used to planthe best possible routetaking into account the real

average speeds measured on the roads.

9. When the route has been calculated, tap Done.

Your TomTom GO navigation device will warn you about any traffic delays

and immediately begin to guide you to your destination, using both spoken

instructions and on-screen directions.

Arrival times

When you plan a route, your TomTom GO asks you if you need to arrive at a

particular time.

Tap YES to enter a preferred arrival time.

Your GO calculates your arrival time and shows you whether you will arrive

on time.

You can also use this information to work out when you need to leave. If your

GO shows that you will arrive 30 minutes early, you can wait and leave in 30

minutes time, rather than arrive early.

Your arrival time is constantly recalculated during your trip. The status bar

shows whether you will arrive on time or if you are going to be late, as shown

below:

You will arrive 55 minutes before the arrival time you entered.

If the estimated arrival time is more than five minutes before

the time you entered, it is shown in green.

You will arrive 3 minutes before the arrival time you entered.

If the estimated arrival time is less than 5 minutes before the

time you entered, it is shown in yellow.

You will arrive 19 minutes late.

If the estimated arrival time is later than the time you entered,

it is shown in red.

Status bar

preferences

Tap Status bar preferences in the Preferences menu, to enable or disable

arrival time notifications.

Select the required options on the first menu screen and then tap Done.

To enable arrival time notifications, select Show leeway to arrival time.

Other navigation options

When you tap Navigate to..., you can set your destination in many ways, not

just by entering the address. The other options are listed below:

Local search

Tap this button to use TomTom Local Search with Google search to help

you find shops and businesses in and around your current location.

You can choose to search for stores and businesses near you, near your

destination, near any other destination or in a city.

For example, if you are looking for a swimming pool near your current

location, enter ’swimming pool’ and choose the best search result.

Home

Tap this button to navigate to your Home location.

You will probably use this button more than any other.

Favorite

Tap this button to select a Favorite as your destination.

Address

Tap this button to enter an address as your destination.

Recent

destination

Tap this button to select your destination from a list of places you have

recently used as destinations.

Point of

Interest

Tap this button to navigate to a Point of Interest (POI).

Point on map

Tap this button to select a point on the map as your destination using the

map browser.

Latitude

Longitude

Tap this button to enter a destination using latitude and longitude values.

TomTom

Buddy

Tap this button to navigate to the last known position of a TomTom Buddy.

Don’t forget that the Buddy may move before you reach him.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere TomTom GPS Handbücher

TomTom

TomTom Navigation Leitfaden

TomTom

TomTom Navigator Navigator 3 Bedienungsanleitung

TomTom

TomTom car kit for iPhone Bedienungsanleitung

TomTom

TomTom GO Bedienungsanleitung

TomTom

TomTom VIA 1435T Bedienungsanleitung

TomTom

TomTom ONE Bedienungsanleitung

TomTom

TomTom NAVIGATOR Bedienungsanleitung

TomTom

TomTom Go 520 Bedienungsanleitung

TomTom

TomTom XXL 530S Bedienungsanleitung

TomTom

TomTom RIDER Bedienungsanleitung

TomTom

TomTom NAVIGATION SYSTEM Bedienungsanleitung

TomTom

TomTom PRO Bedienungsanleitung

TomTom

TomTom GO Bedienungsanleitung

TomTom

TomTom Start 20 series Bedienungsanleitung

TomTom

TomTom GO Bedienungsanleitung

TomTom

TomTom GPS Receiver Bedienungsanleitung

TomTom

TomTom GO Bedienungsanleitung

TomTom

TomTom GO Bedienungsanleitung

TomTom

TomTom GO Bedienungsanleitung

TomTom

TomTom Navigator Navigator 3 Bedienungsanleitung

TomTom

TomTom ONE Bedienungsanleitung

TomTom

TomTom Mobile Bedienungsanleitung

TomTom

TomTom Go 920 Bedienungsanleitung

TomTom

TomTom Navigator SDK and Betriebsanleitung

Beliebte GPS Handbücher anderer Marken

Raven

Raven Cruizer II Handbuch

Hama

Hama 53118 Bedienungsanleitung

Garmin

Garmin SOUNDER 125 Bedienungsanleitung

Garmin

Garmin DEZL 580 Bedienungsanleitung

Jigabot

Jigabot EX Bedienungsanleitung

Pointer

Pointer Cellocator CelloTrack XT LTE Installationsanleitung

Queclink

Queclink GV55LITE Bedienungsanleitung

Voxson

Voxson Voxtrack GPS500 Gebrauchsanweisung

Garmin

Garmin ECHOMAP PLUS Bedienungsanleitung

Starcom Systems

Starcom Systems Kylos Compact Bedienungsanleitung

Garmin

Garmin 15 H Series Bedienungsanleitung

Cobra

Cobra Marine MC 600Ci Bedienungsanleitung

Cellocator

Cellocator CelloTrack T Bedienungsanleitung

Enfora

Enfora Mini-MT GSM2228UG001 Bedienungsanleitung

Magellan

Magellan eXplorist 100 Bedienungsanleitung

LTE

LTE G50B Bedienungsanleitung

Garmin

Garmin DEZL OTR500 Bedienungsanleitung

SkyGolf

SkyGolf SkyCaddie SG1 Bedienungsanleitung