ToolKitRC M8 Bedienungsanleitung
@ToolkitRC 2018
1
M8
Manual V1.2
2018.12
www.ToolkitRC.com
ToolkitRC Technology (Shenzhen) Co., Ltd.
@ToolkitRC 2018
2
Introduction
Thank you for purchasing the M8 model toolchain.
Please read this manual carefully before use.
Key Points
Tips
Important
Information
Further information
To ensure that you have a more enjoyable experience,
Scan the QR code below and pay attention to obtaining
details of the use of this product, video teaching and the
latest information before using it. Information
@ToolkitRC 2018
3
Safety
1, M8 allows input voltage 10-30V, to ensure that the
power supply voltage is consistent, pay attention to
the positive and negative polarity of the power
supply.
2. Do not use this product in heat, moisture,
flammable or explosive atmospheres.
3. Please use this product when someone is guarded
to prevent accidents.
4. When not using this product, please unplug the
input power in time.
5. When using the charging function, please set the
current matching with the battery. Do not set the
battery to charge too much, so as not to damage
the battery.
@ToolkitRC 2018
4
Contents
Introduction..................................................................... 2
Key Points.........................................................................2
Safety................................................................................ 3
M8 Layout........................................................................ 6
First time use....................................................................7
Charge and discharge....................................................9
1，Battery type setting...................................................9
2，Cutoff voltage setting（TVC）.............................. 11
3，NiMH Setting（PeakV）........................................ 12
4，Battery Setting......................................................... 13
5，Current setting.........................................................14
6，Working mode........................................................ 16
Battery Measurement.................................................. 23
ESC measurement........................................................ 25
Signal output................................................................. 26
Power output.................................................................29
System settings.............................................................. 31
Other functions............................................................. 34
Specification.................................................................. 36
@ToolkitRC 2018
5
product description
M8 is a charge and discharge instruments
multifunctional model tool chain Product that
integrates balancing, electro-display, power meters,
signal gauges, signal sources and other functions.
• Lipo, LiHV, LiFe 1-8S,NiMh 1-20s,PB 1-12s battery
charging and discharging and balance management
•Charging current: Maximum 15A @300W
•Discharge Current: Recovery MAX 15A@300W
normal mode MAX 3A @12W
•Lithium battery full voltage can be set (TVC)
• can measure battery voltage, battery internal
resistance, lithium battery balance management
• Electrically adjustable power meter, simultaneous
output voltage and throttle signal
• Measurement of signal values such as
PWM/PWM/SBUS with accuracy of up to 1us
• can output PWM/PWM/SBUS standard signal,
accuracy up to 1 microseconds
• constant current constant pressure source output,
can customize 1-30v constant pressure, 1-15A
constant current
• can be adapted to the mainstream UAV battery,
automatically activated and charged.
•Device simulation for USB flash drive, copy upgrade
file to achieve product firmware upgrade
•Device simulation for USB flash drive, copy upgrade
file to achieve product firmware upgrade
@ToolkitRC 2018
6
M8 Layout
Front
back
Display
Jog Wheel
Output
Balance
Port
Cooling
Input
Cooling
USB
Servo Port
@ToolkitRC 2018
7
First time use
1, The 10-30V power supply is connected to the
input port on the back of the M8
2, The display shows the boot logo and stays
for 2 seconds
3, Accompanied by do-re-mi boot sound
4, the boot is completed, the display enters the
main interface as shown below
5, Rotate the encoder disk, move the cursor
selection function, press the code disk to
determine, enter the selected function and
enter the corresponding interface
6. After entering the function interface, rotate
the encoder disk to move the cursor, select
the setting item or value, press the code disk,
and modify the option or value. After the
modification is completed, press the code
@ToolkitRC 2018
8
disk to confirm.
7. Press the Escape key to end the modification
or return to the previous screen.
=================================
1, short press the encoder disk once, to
determine the key function
2, long press the code disk for 2 seconds, as
the delete key function
3, turn the encoder disk or press any button,
there are sound prompts
=================================
@ToolkitRC 2018
9
Charge and discharge
After selecting the [Charge] function on the main
interface, press [OK] to enter the charging function,
the following interface is displayed.
1，Battery type setting
Rotate the encoder disk, move the cursor, select
the battery that has been set, or create a new
battery, press [OK] to enter the battery setting
interface, as shown below.
Move the cursor to [Lipo] and press [OK] to modify
the battery type. The charger supports charging and
discharging five types of batteries: Lipo, LiHV, LiFe,
@ToolkitRC 2018
10
NiMh, PB. After selecting the battery that matches
the actual battery. Short press [OK] and [Exit]
Effective.
=================================
Important：
1, the wrong battery type charging may
damage the battery, charger, and hair
Risk of burning, etc., please be careful.
2, battery that does not indicate the battery
type, do not use this product to charge
=================================
Information:
1, Lipo: often referred to as lithium polymer
battery, nominal voltage 3.70V, fully
charged 4.20V battery
2, LiHV: often referred to as high-voltage
lithium battery, nominal voltage 3.85V,
4.35V battery after full
3, LiFe: often referred to as iron-lithium
battery, nominal voltage 3.30V, fully
charged 3.60V battery
4, NiMh: Often called nickel-metal hydride
battery, nominal voltage 1.20V
5, PB: often referred to as lead-acid battery,
nominal voltage 2.00V
Andere Handbücher für M8
1
Inhaltsverzeichnis
Andere ToolKitRC Akkuladegerät Handbücher
ToolKitRC
ToolKitRC C6 Bedienungsanleitung
ToolKitRC
ToolKitRC M9 Bedienungsanleitung
ToolKitRC
ToolKitRC M8 Bedienungsanleitung
ToolKitRC
ToolKitRC C4 Bedienungsanleitung
ToolKitRC
ToolKitRC Q6AC Bedienungsanleitung
ToolKitRC
ToolKitRC M4 Pocket Bedienungsanleitung
ToolKitRC
ToolKitRC C3 Bedienungsanleitung
ToolKitRC
ToolKitRC M6DAC Bedienungsanleitung
ToolKitRC
ToolKitRC M6 Bedienungsanleitung
ToolKitRC
ToolKitRC M7 Bedienungsanleitung
