Topcom BR 604 Bedienungsanleitung
BR 604
QUICK INSTALLATION GUIDE
INSTALLATIE GIDS
GUIDE D’INSTALLATION RAPIDE
SCHNELLE INSTALLATIONSANLEITUNG
SNABBINSTALLATIONSGUIDE
HURTIG INSTALLATIONSGUIDE
HURTIGINSTALLASJON
UPUTE ZA INSTALACIJU
MANUAL DE USUARIO
MANUAL DO UTILIZADOR
2 Topcom Broadband Router BR 604
1. THE CONNECTION PANEL 3
2. CONFIGURING THE PC TO CONNECT TO THE CABLE/DSL
ROUTER 3
3. VERIFY YOUR PC’S IP CONFIGURATION 4
4. SETUP THE BROADBAND ROUTER 5
5. CONNECTION STATUS 9
6. ROUTER ADVANCED SETTINGS 10
7. FIRMWARE UPDATE 10
8. WARRANTY 11
Topcom Broadband Router BR 604 3
ENGLISH
1. THE CONNECTION PANEL
•
POWER
: The power port is to connect the 5V DC power adapter.
- The power LED on the front panel will go ON when the power adapter is connected.
•
WAN
: The WAN Ethernet port is to connect your ASDL/Cable modem.
- The WAN LED will go ON if the network Ethernet cable is properly connected.
•
Ports 1- 4
: This is to connect networked devices, such as PCs, ftp servers or anything else you want to put on
your network.
- The LAN LED’s will indicate the connection status.
•
Reset Button
: If you would like to load default settings, press the reset button and hold it for 5 ~ 6 seconds. It will
load the factory default settings for the device. Do not press the reset button unless you want to clear the current
data.
2. CONFIGURING THE PC TO CONNECT TO THE CABLE/DSL
ROUTER
Remark
- The routers default IP address is: 192.168.1.1
- DHCP server is ON
If you do not wish to set a static IP address on your PC, you will need to configure your PC to accept the IP address
that the router will provide.
1. Click
Start
button, select
Settings
, then
Control Panel
2. Double-click the
Network
Icon
3. In the
configuration
windows, select the
TCP/IP protocol
line that has been associated with your network card/
adapter.
4 Topcom Broadband Router BR 604
4. Click the Properties button, then choose the
IP ADDRESS
tab. Select
Obtain an IP address automatically
.
5. Then select
DNS configuration
tab to add
DNS IP address
. Select
Disable DNS function
. Press
OK
. You have
completed the client settings.
6. After clicking
OK
, windows will ask you to restart the PC. Click
Yes
.
3. VERIFY YOUR PC’S IP CONFIGURATION
There are some tools which are great for finding out a computer’s IP configuration: MAC address and default gateway.
• WINIPCFG (for windows 95/98)
Inside the windows 95/98/ME Start button, select Run and type
winipcfg
. In the example below this computer has a IP
address of 192.168.1.100 and the default gateway is 192.168.1.1. The default gateway should be the broadband router
IP address. The MAC address in windows 95/98 is called the Adapter Address.
NOTE:You can also type winipcfg in the DOS command.
Topcom Broadband Router BR 604 5
ENGLISH
• IPCONFIG (for windows 2000/NT)
In the DOS command type
IPCONFIG
and press
Enter
. Your PC IP information will be displayed as shown below.
-
IPCONFIG / RENEW
will renew the IP address, gateway and DNS.
• Windows XP
Click the right mouse key on your network adapter and select
Status
The support screen will display the IP information.
4. SETUP THE BROADBAND ROUTER
When your PC has a valid IP address, you should be able to go to the router setup web page.
Open Internet Explorer or Netscape Navigater and goto address:
192.168.1.1
Now the login screen will appear.
6 Topcom Broadband Router BR 604
• Enter the username and password.
- By default the username is
admin
and the password is
admin
.
Now you enter the web management of your Broadband Router.
• The setup wizard will automatically appear:
- Click
Next
to proceed
• In next screen you can change the login password (admin) to your own password.
- Click
Next
to proceed
• In next screen you can select your Time Zone
- Click
Next
to proceed
Topcom Broadband Router BR 604 7
ENGLISH
• Now you can change the LAN settings:
- The LAN IP address and Subnet mask can be changed.
- The router DHCP server can be Disabled / Enabled
- The DHCP range can be set.
- Click
Next
to proceed
• Now the BR604 will try to detect your broadband connection type
• Depending on your connection type next screen will appear: (for PPPoE, this screen will not appear if the auto
detection has been successful )
- Select your Connection Type
- Click
Next
to proceed
-
Obtain IP automatilally (DHCP client)
: this connection is mostly used for connecting the BR604 to a cable
modem.
-
Fixed IP address
: for connections with fixed WAN IP address.
- enter the
WAN IP
,
Subnet Mask
,
Gateway
and
DNS
addresses.
- Click
Next
to proceed.
8 Topcom Broadband Router BR 604
-
PPPoE to obtain IP automatically
: mostly used for connecting the BR604 to an ADSL-Ethernet Bridge with
PPPoE dial up.
- enter username and password (twice)
- Click
Next
to proceed.
-
PPPoE with a fixed IP address
: PPPoE connection with fixed WAN IP address.
- enter username, password (twice) and WAN IP address
- Click
Next
to proceed.
-
PPTP
: for setting up a VPN connection: in this case the BR604 WAN port is connected at the LAN site of another
existing network !
- enter the VPN IP address, Subnet Mask and Gateway.
- enter the VPN Server IP address, PPTP Account and Password (twice).
- Click
Next
to proceed.
• Now the setup is complete
- Click
Restart
to save and restart the router.
Topcom Broadband Router BR 604 9
ENGLISH
• When all settings are saved a new screen will pop up:
- Click
Close
• The Setup Wizard is completed !
Remark:
• Next time you go to the router Web page the Setup Wizard will appear again. This can be disabled:
- select
No
and click
update
- now the wizard will not appear again when you access the router Web page.
5. CONNECTION STATUS
The WAN connection can be checked in the Status screen on the router Web page.
For PPPoE connection:
- The connection can be disconnected by clicking
Disconnect
. You can connect by clicking the
Connect
key
10 Topcom Broadband Router BR 604
For DHCP client:
- The WAN IP address can be released by clicking the
DHCP Release
key.
DHCP Renew
will renew the
IP address.
Remark:
• After each action, the router will jump to following screen:
- The action will be shown.
- please click
Back
to return to menu.
6. ROUTER ADVANCED SETTINGS
You can enter the menu for advanced settings. Please refer to the full user guide on the provided CD for more details.
7. FIRMWARE UPDATE
When a new firmware is released, it will be published on the Topcom website ( www.topcom.net) in the support –>
downloads section. Please download the image and go to
Tools
in the router menu. Now select the
Firmware
page
- click
Browse
to select the downloaded firmware image and click the
Upgrade
key.
Andere Handbücher für BR 604
1
Inhaltsverzeichnis
Sprachen:
Andere Topcom Netzwerk-Router Handbücher
Topcom
Topcom Wireless Kit 108MBPS Bedienungsanleitung
Topcom
Topcom Wireless Webracer 1104 Bedienungsanleitung
Topcom
Topcom Xplorer 874B Bedienungsanleitung
Topcom
Topcom Xplorer 871 Bedienungsanleitung
Topcom
Topcom Skyr@cer WBR 244 Bedienungsanleitung
Topcom
Topcom Skyr@cer Pro UBR 624 Bedienungsanleitung
Topcom
Topcom Webracer 881 PSTN Bedienungsanleitung
Topcom
Topcom Xplorer 874A Bedienungsanleitung
Topcom
Topcom BR 604 Bedienungsanleitung
Topcom
Topcom WBR 611 Bedienungsanleitung
Beliebte Netzwerk-Router Handbücher anderer Marken
NETGEAR
NETGEAR FS526T - Switch Bedienungsanleitung
Korenix
Korenix JetNet 5710G Series Bedienungsanleitung
Automated Logic
Automated Logic ZN551 Betriebsanleitung
Cisco
Cisco ASR 1000 Series Bedienerhandbuch
EnGenius
EnGenius ESR-9710 Bedienungsanleitung
Cisco
Cisco 805 Series Bedienungs- und Sicherheitshinweise