Topcom Skyr@cer 544 Bedienungsanleitung

Skyr@cer Access Point 544

QUICK INSTALLATION GUIDE

GIDS VOOR SNELLE INSTALLATIE

GUIDE D’INSTALLATION RAPIDE

SCHNELLE INSTALLATIONSANLEITUNG

SNABBINSTALLATIONSGUIDE

HURTIG INSTALLATIONSGUIDE

HURTIGINSTALLASJON

NOPEA ASENNUSOHJE

[email protected] Page 1 Wednesday, February 12, 2003 3:19 PM

Skyr@cer Access Point 544

[email protected] Page 2 Wednesday, February 12, 2003 3:19 PM

Skyr@cer Access Point 544

[email protected] Page 3 Wednesday, February 12, 2003 3:19 PM

4 Skyr@cer Access Point 544

ENGLISH

1. INTRODUCTION 5

1.1. Product Features 5

1.2. System Requirements 5

2. LED INDICATORS 5

3. CONFIGURATION 6

3.1. Configuration menu 6

3.1.1. Status Page 8

3.1.2. Basic Setting 8

3.1.3. IP Setting 10

3.1.4. Advanced Setting 12

3.1.5. Security 14

3.1.6. Tools 16

4. USING AP 22M UTILITY FOR MANAGEMENT 17

4.1. Installing AP 22M Utility 17

4.2. Manage and Configure AP with AP 22M Utility 21

4.2.1. Link Information 21

4.2.2. AP Setting 22

4.2.3. IP Setting 24

4.2.4. WEP Setting 24

5. TECHNICAL SPECIFICATION 26

6. WARRANTY 27

[email protected] Page 4 Wednesday, February 12, 2003 3:19 PM

Skyr@cer Access Point 544 5

ENGLISH

1. INTRODUCTION

The Wireless Access Point delivers enhanced IEEE 802.1b high performance for up to 22Mbps,

which is double of that offered by most of the Access Points in the current market.

1.1. PRODUCT FEATURES

•Fully compatible with IEEE 802.11b standard for wireless and 802.3 for LAN connection.

•Interoperatable with existing IEEE 802.11b standard devices.

•Supports new data modulation PBCC technology fromTexas Instruments, which allows high

data with double speed of right up to 22Mbps.

•20% more transmitting and receiving coverage supported by PBCC modulation.

•Supports auto data rate fallback under noisy environment or longer distance.

•Enhanced security on WEP encryption from 64, 128 to a maximum of 256 bits.

•Built-in DHCP server

•4AP operating modes available to fulﬁll your needs:

1. AP

2. AP Client

3. AP Bridge (Point-to-Point and Multi-Point)

4. Multiple Bridge

•Easy setup and installation with web-based conﬁguration utility.

•AP management utility running on PC to make it easy to manage and conﬁgure all the AP in

the same network.

1.2. SYSTEM REQUIREMENTS

•Windows 95, 98, 98SE, Millennium, NT, 2000 and XP operating system

•Internet Explorer 5.5 or higher

•One CD-ROM drive

•At least one RJ-45 Ethernet network adapter installed

2. LED INDICATORS

•Power LED

ON when the unit is powered up

•LAN LED

ON indicates LAN connection; blink indicates LAN activity

•WLAN LED

ON indicates WLAN connection; blink indicates wireless activity

[email protected] Page 5 Wednesday, February 12, 2003 3:19 PM

6 Skyr@cer Access Point 544

ENGLISH

3. CONFIGURATION

The web-based configuration menu provides user friendly graphic design for easy configuration.

Please go through the following check list before you consider using the configuration menu.

1. You will need Internet Explorer v5.5 or higher and Netscape v4.0 or higher.

2. The Ethernet network adapter must be working properly.

3. If you are connecting the Access Point through a router or a local area network, which has

DHCP server enabled, you will not need to assign a static IP address to the computer that

you are using to configure the Access Point.

4. If you are not connecting the Access Point through a router or a local area network, which

has DHCP server enabled, you will need to assign a static IP address to the computer that

you are using to configure the Access Point.

5. The IP address assigned to the computer that you are using to configure the Access Point

must be in the same IP address range as Access Point’s

6. The power jack must be properly inserted to make sure that the Access Point is powered.

The Default Settings of the 22Mbps Access Point:

3.1. CONFIGURATION MENU

Enter the default Access Point IP address : 192.168.1.1

!Note: The default username is “admin”and the default password is also“admin”.

P Address 192.168.1.1

User Name admin

Password admin

ESSID wireless

Channel 6

WEP disabled

Open web browser

window.

Type in IP address.

Press “Enter” or “Go”.

Type in “User Name”.

Type in “Password”

Click

“OK”

[email protected] Page 6 Wednesday, February 12, 2003 3:19 PM

Skyr@cer Access Point 544 7

ENGLISH

The configuration menu will appear. You can configure and get information about the Access

Point by going through each tab. Here Status page is displayed.

[email protected] Page 7 Wednesday, February 12, 2003 3:19 PM

8 Skyr@cer Access Point 544

ENGLISH

3.1.1. STATUS PAGE

This page displays the following information.

Firmware Version

: Shows the current firmware version

LAN

: Shows the Mac address, IP address (default: 192.168.1.1), Subnet Mask,

Gateway Address. The current LAN traffic calculated in terms of number of

packets sent and received by AP through wired connection is also displayed.

Wireless

: Shows the Mac address, current ESSID, the status of Encryption Function

(Enable or Disable). the current using channel. The current wireless traffic

calculated in terms of number of packets sent and received by AP through

wireless communication is also displayed.

View Log

: Upon clicked, the page will change to log page. The log page records every

event and the time that it happens.

You may clear the entries recorded in the log by clicking the “

Clear Log

” button, and refresh the

screen to show the latest log entries by clicking the “

Refresh

” button.

3.1.2. BASIC SETTING

This is the page where you can change the basic settings of the Access Point with the minimum

amount of effort to adjust a secure wireless network.

[email protected] Page 8 Wednesday, February 12, 2003 3:19 PM

Skyr@cer Access Point 544 9

ENGLISH

AP Name

: Name of the AP, which can be used to identify the Access Point among the all the

Access Points in the wireless network.

SSID

: Service Set Identifier, which is a unique name shared among all clients and nodes in

a wireless network. The SSID must be identical for each clients and nodes in the

wireless network.

Channel

: The value of channel that AP will operate in. You can select the channel range of

1 to 13.

WEP Key

: To disable WEP security, click on the “Disable” option. To enable WEP security, there

are 3 type of WEP keys to choose from, 64bits, 128bits and 256bits. When one of the

3 WEP key options is selected, you must enter the value of one of the four Keys in

ASCII or HEX format. You can also enter the values for all four WEP keys, and select

one to use.

Note! When AP’sWEP security is enabled, all the wireless clients that wish to

connect to the Access Point must also haveWEP enabled with the identicalWEP Key

value entered.

For the changes made to any of the items above to be effective, click “Apply”.

The new settings are now been saved to Access Point and will be effective once the Access Point

restarts.

Click “

Back

” to go back to Basic Setting page.

[email protected] Page 9 Wednesday, February 12, 2003 3:19 PM

10 Skyr@cer Access Point 544

ENGLISH

3.1.3. IP SETTING

This is the page where you configure the IP and DHCP settings of the Access Point.

Thedefault IPaddressofthe AccessPointis192.168.1.1 withtheSubnet Mask of255.255.255.0.

You can type in other values for IP Address, Subnet Mask and Gateway and click “

Apply

” button

for the changes to be effective.

Youcan alsosetthe AccessPoint toobtainthe IPfroma DHCPserver, but itis notrecommended.

Once set, it will be difficult to determine the dynamic IP assigned to the Access Point. Select the

option “Obtain IP Automatically” and click “

Apply

” button for the changes to be effective.

[email protected] Page 10 Wednesday, February 12, 2003 3:19 PM

Inhaltsverzeichnis

Sprachen:

Andere Topcom Drahtloser Zugangspunkt Handbücher

Topcom

Topcom SKYR@CER PCI 2101GMR Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung