Before using the push spreader
, review the instructions
follow these instructions
USING YOUR SPREADER
1.
Inspect your spreader before each use. Make sure the wheels turn easily, and the gearbox moves
when the spreader is pushed.
The hopper should be clean and free from cracks.
2. Spreader is designed to
Materials such as
Powder, Manure, Top Soil, Gravel, and Mulch
characteristics and should n
ot be used with your spreader
3.
Do not use spreader on windy days when spreading grass seed or herbicides.
4.
Determine approximate square footage of
required. Please refer to
fertilizer manufacturer’s re
as you fill the hopper.
5.
Before filling the hopper, make sure
control plate is closed.
6.
Set the adjustable stop with the flow control lever always in
ready to stop or turn back, close the flow control plate to stop dispersing the material and continue
one more stride.
This reduces waste and avoids damaging the lawn with oversaturated product
coverage.
7. Follow
fertilizer manufacturer’s recommended coverage rate for each product
8.
To maintain the same coverage when walking at a different speed, adjust the flow rate.
flow setting for slower speeds
9. Keep th
e impeller plate horizontal when operat
uneven coverage.
10.
Make sure the R pin is installed in the
11.
Always start walking prior to opening
12. Always cl
ose the flow control plate before turning or stopping the spreader.
13.
If spreading material is accidentally deposited too heavily in a
with a garden hose or sprinkler to prevent burning of the lawn.
14.
To insure consistent coverage, make
broadcast pattern.
15.
When broadcasting spreading material, make sure the broadcast pattern does not hit evergreen
trees, flowers or shrubs.
16. Do not over apply spreading
Over application
will lead to lawn damage and contamination.
- 7 -
WARNING
, review the instructions
below
property damage or injury to the operator
Inspect your spreader before each use. Make sure the wheels turn easily, and the gearbox moves
The hopper should be clean and free from cracks.
a range of materials (Fertilizer, Grass S
Powder, Manure, Top Soil, Gravel, and Mulch
have
ot be used with your spreader
Do not use spreader on windy days when spreading grass seed or herbicides.
Determine approximate square footage of
the
area to be covered and estimate amount of material
fertilizer manufacturer’s re
commendation.
Break up any lumpy fertilizer
Before filling the hopper, make sure
that the flow control lever is in the“0”
Set the adjustable stop with the flow control lever always in
the“0”
ready to stop or turn back, close the flow control plate to stop dispersing the material and continue
This reduces waste and avoids damaging the lawn with oversaturated product
fertilizer manufacturer’s recommended coverage rate for each product
To maintain the same coverage when walking at a different speed, adjust the flow rate.
the flow setting for higher speeds.
e impeller plate horizontal when operat
ing
the spreader. Tilting the spreader will
Make sure the R pin is installed in the
hopper before starting the spreader.
Always start walking prior to opening
the closure plate.
ose the flow control plate before turning or stopping the spreader.
If spreading material is accidentally deposited too heavily in a
small
area, soak the area thoroughly
with a garden hose or sprinkler to prevent burning of the lawn.
To insure consistent coverage, make
sure
each broadcast pattern slightly overlaps the previous
When broadcasting spreading material, make sure the broadcast pattern does not hit evergreen
the recommended coverage rate for each product.
will lead to lawn damage and contamination.
. Failure to
ystanders.
Inspect your spreader before each use. Make sure the wheels turn easily, and the gearbox moves
The hopper should be clean and free from cracks.
physical
area to be covered and estimate amount of material
Break up any lumpy fertilizer
very time you are
ready to stop or turn back, close the flow control plate to stop dispersing the material and continue
This reduces waste and avoids damaging the lawn with oversaturated product
To maintain the same coverage when walking at a different speed, adjust the flow rate.
Reduce the
the spreader. Tilting the spreader will
result in
area, soak the area thoroughly
each broadcast pattern slightly overlaps the previous
When broadcasting spreading material, make sure the broadcast pattern does not hit evergreen
the recommended coverage rate for each product.
