Topodome J Series Bedienungsanleitung
Quick Installation Guide
J Series/ M Series /S Series
IP Security Camera
(EN)
For a complete product manual and installation software, please
visit TOPODOME official website.
www.topodome.com
Copyright © 2020 Topodome, All rights reserved
Topodome Quick Installation Guide QIG-En-V1.0
1
www.topodome.com Tech support email support@topodome.com
General Introduction
Topodome IP Security Cameras include J series, M series
and S series products.
These cameras can be installed in various places, walls,
backyards, indoors and corridors. These series of products
can be viewed with the same mobile APP or computer
software, providing customers with convenient and safe
services.
These series of products support wired and wireless
connections. It should be noted that wireless connections
only support 2.4G wireless.
Each camera is delivered with below accessories:
Package Contents
IP Security Camera x1
Power Adapter x1
Network Cable x1
Wi-Fi Antenna x1
Quick Installation Guide x1
Installation Screws x4
Topodome Quick Installation Guide QIG-En-V1.0
3
www.topodome.com Tech support email support@topodome.com
Important Tips:
1.The suitable use environment temperature is -20 to 60
degrees Celsius, please avoid using in an environment that
exceeds this range.
2.These products only support 2.4G wireless network.
Please make sure that your wireless router supports 2.4G
wireless and does not activate MAC filtering (For Mac
address of camera, please refer to 3.1 section) or firewall. If
you have set these security settings for the router, please
make sure to add the camera to the white list.
3.When installing the cameras, please avoid placing the
lens close to reflective glass or white walls, which may
overexpose the graphics.
4.Please make sure that the installation area has a good
wireless signal. You can check the strength of the wireless
signal in the wireless setting function of the CamHi pro
APP. It is ideal if the strength is higher than 70%.
5.When the PTZ type camera is powered on, it will
automatically rotate. Please do not turn it by hand at this
time. After the startup process is over and the installation is
complete, you can control its rotation or zoom through the
mobile phone, browser or CMS software.
Topodome Quick Installation Guide QIG-En-V1.0
4
www.topodome.com Tech support email support@topodome.com
Start Installation of the Camera
These cameras can be installed by a smartphone/ tablet
(Android or iOS), or by a PC (Windows or Mac OS). Please
finish the hardware installation first and begin the software
configuration refer to the below guide.
1. Hardware installation
1.1 Mount the Wi-Fi antenna and make it stand vertically.
1.2 Connect the camera’s DC socket with the power
adapter, the camera will turn on automatically.
1.3 Before configuring the camera, you should wait for
about one minute until the startup process is over.
Fig1.1 Connect to the AC/DC adapter
Topodome Quick Installation Guide QIG-En-V1.0
5
www.topodome.com Tech support email support@topodome.com
1.4 During the camera configuration process, if you use a
mobile phone or tablet device, you can choose to
connect the camera to the router with a network cable,
or choose not to connect the network cable. Instead,
connect the camera's hotspot first, and then set up a
wireless connection with the router.
1.5 If you are using a PC for configuration, you must
connect the camera to the router with a network cable
(you can find the network cable in the gift box).
Fig1.2 Connect the camera to router with Ethernet cable
LAN Port
Topodome Quick Installation Guide QIG-En-V1.0
6
www.topodome.com Tech support email support@topodome.com
2. Smart Phone Installation Method
2.1 Download and Install CamHi Pro App.
Search "CamHiPro" on App Store or Google Play, or scan
the QR code to download CamHiPro App and install it on
your Phone/ Tablet.
2.2 Add Camera to Your Phone and Login the
Camera.
Scan the left QR code to directly
download the iOS App from App
Store
Scan the left QR code to directly
download the Android App from
Google Play
Topodome Quick Installation Guide QIG-En-V1.0
7
www.topodome.com Tech support email support@topodome.com
Run the CamHiPro App on the phone. Tap "Click Add
Camera", then tap "IP camera".
2.2.1 If it is for the first installation, go to "New device",
then tap "Power is on, next step". Here you can choose
"Connected network Cable" or "Not connected the network
cable".
-Connected network Cable:
a. Ensure the camera has been connected to the router
with a network cable, tap the "Connected network cable",
new device UID and IP address will display on list, select
your camera by tapping the UID Code for going to the
interface of device information.
Tips:
You can find the UID Code on the
label of the camera, which is under a
QR code.
Fig1.3 UID and QR Code
b. Enter the username and password (both are "admin"
for factory default setting, the password is case sensitive).
c. Tap "Add to", the next page will display "wireless
configuration", please click the symbol ">" beside the
"WiFi name" input field, tap the 2.4G wireless SSID of
Topodome Quick Installation Guide QIG-En-V1.0
8
www.topodome.com Tech support email support@topodome.com
yours, input the WIFI password, then tap "Configure
wireless and add".
Fig2.1 Wireless configuration
d. When WiFi configuration is successful, you can
choose Camera Name from default options or input yours.
e. If you decide not to configure the Wireless and click
the "Not configured yet, add directly", will skip the
configuration of WiFi, you have to finish this step later in
camera settings when you want to connect to the router via
wireless mode .
Topodome Quick Installation Guide QIG-En-V1.0
9
www.topodome.com Tech support email support@topodome.com
f. Now the camera device page will appear, please tap
the Video Windows of the camera and enter the Control
Panel of your camera.
g. In the Control Panel, you can implement functions
such as video recording, screenshots, two-way voice and
image adjustment. If your camera model supports PTZ,
then you can achieve rotation and zoom functions.
--Not Connected to the network Cable:
Important note: In this step, the camera should have an antenna
installed and placed not far from the wireless router.
a. After tapping "Not connected to the network cable",
you have to choose the camera shapes, please tap the
option as below, tap "Go add".
Fig2.2 Choose camera shapes
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere Topodome Sicherheitskamera Handbücher
