TorcUP RAPTOR RP Series Einrichtungshandbuch
Repair Instructions
2nd Stage Raptor Replacement
Tools required:
3/16 inch allen wrench, pliers & bin for balls
Remove ball plug with allen wrench
Showing plug removed
Place Raptor over bin so balls will drop into bin
Write here
Rotate annulus alternately counter clockwise
allowing balls to drop out
•G:\Raptor_BreakApart\expor\Raptor_Asse
mble (10).jpg
Write here
Showing a ball dropping out
Write here
Continue turning until all balls are out and annulus
comes from motor
Write here
Pull apart gearbox from motor and check to ensure
gears are in gear housing as shown
Write here
Use socket to position gearbox vertically for stability
Inhaltsverzeichnis
Andere TorcUP Elektrowerkzeuge Handbücher
TorcUP
TorcUP TXU Series Bedienungsanleitung
TorcUP
TorcUP TU-2 Bedienungsanleitung
TorcUP
TorcUP RP-500 Bedienungsanleitung
TorcUP
TorcUP VT Series Bedienungsanleitung
TorcUP
TorcUP TX Series Bedienungsanleitung
TorcUP
TorcUP TX LINK Series Betriebsanleitung
TorcUP
TorcUP SQ Series Bedienungsanleitung
TorcUP
TorcUP ULTRA series Handbuch
TorcUP
TorcUP TU Series Bedienungsanleitung
TorcUP
TorcUP SR Series Bedienungsanleitung
