Toshiba E-studio 210c Bedienungsanleitung

File No. SME04002600

Ver01_2004-11

Revision Record

File No. SME04002600

Date Rev. No. Item Descriptions Remarks

November, 2002 00 --- Issue of the first version Information on the

e-STUDIO210c/310c

only

November, 2004 01 2.13, 3.14,

3.15

3.1, 3.2, 3.3,

3.4, 3.5, 3.6,

3.7, 3.8, 3.9,

3.10, 3.11,

3.12, 3.13

1.1, 1.2, 2.12

Addition of new items

Addition and correction of adjustment procedures and

cautions

Addition of information on the e-STUDIO211c/311c

The Imaging Manual is intended for customers using the Toshiba e-STUDIO210c/310c and e-STUDIO211c/311c

with a variety of specific needs and inquiries for high image quality, such as:

xHow to obtain a clearer copy image

xHow to maintain the current image quality

xHow to make the text look sharper on the copy

The Toshiba MFPs are factory-configured to provide image quality settings that satisfy the majority of

customers. However, these settings may not be necessarily optimal for all specific needs from customers.

Proper image quality adjustments can satisfy such needs. Most of the adjustments described in this manual must

be performed by a service technician, but a few of them can also be performed by the customer.

It is strongly recommended that this manual be fully utilized by not only the service technician, but also the sales

representative, who also has opportunities of obtaining customer feedback on the image quality. This manual

helps the sales representative to study and comprehend what kind of customer needs for the image quality can be

satisfied, to make a proposal to the customer for improving image quality, and to communicate the customers

needs with ease to the service technician. In addition, this manual is expected to facilitate the marketing of the

Toshiba MFPs to prospective customers that have specific demand for image quality and the expansion of sales.

The adjustments described in this manual are all based on the needs of actual customers. Meeting their specific

needs will increase their satisfaction.

Please remember to read "Cautions after the completion of the adjustment", which you must pay close attention

to, after the completion of the adjustment.

Precautions in Servicing

• For adjustments to be performed by the service technician, the cautions mentioned in the Service Manual must

be stringently followed. The adjustments must be performed by a qualified service technician who has

completed the service training course.

• The default values mentioned in this manual may be different from the actual ones, due to the timing of

shipping (firmware version). But note that the values recommended and acceptable value range mentioned in

this manual remain the same.

Purpose of the Imaging Manual

1. General Adjustments – Copying and Printing

1.1 To Obtain High-density Image in General

1.2 To Have Optimum Image Quality for Paper Used

1.3 To Eliminate Color Unevenness and Density Unevenness

1.4 To Have Uniform Image Quality in Continuous Printing

(To optimally set the image quality control function)

1.5 To Maintain Uniform Image Quality in Continuous Printing

(To optimally set the image quality control function)

1.6 To Eliminate Color Shifts for Text and Thin Lines

2. Copier-specific Adjustments

2.1 To Obtain the Same Color Balance as that of the Original

2.2 To Eliminate Inclusion of Any Color other than Black in Gray Hue

2.3 To Obtain A Denser and Brighter Image than the Original

2.4 To Provide High Density and Solidity for A Pale Area

(To improve the highlight reproducibility)

2.5 To Eliminate Background Color

2.6 To Avoid Copying the Back Side of Originals on Thin Paper

2.7 To Eliminate Moiré

2.8 To Obtain A Sharper Image in General (To enhance sharpness)

2.9 To Make Photo Borders and Edges Look Softer

2.10 To Make An Image Fully Solid and Dense

2.11 To Correctly Reproduce the Hues of Highlighter Pens

2.12 To Obtain Good Color Balance on Thick Paper

2.13 To Obtain Good Color Balance on Special Paper (Waterproof Gloss Paper for POP)

(e-STUDIO211c/311c only)

3. Printer-specific Adjustments

3.1 To Obtain Uniform Color Balance (To perform calibration)

3.2 To Obtain Your Favorite Color Balance

3.3 To Obtain Color Balance Similar to That of Monitor

3.4 To Print A Gray Area in Black Toner Only (To eliminate moiré in the gray area)

3.4.1 To Improve Color Reproducibility of Gray Area in RGB Data

3.4.2 To Improve Color Reproducibility of Gray Area of CMYK Data

3.4.3 To Print Attaching Importance to Reproducibility of All Gray Areas

3.5 To Eliminate Redness from A Printed Gray Area (To adjust gray balance)

3.6 To Prevent Blending of Primary Colors (C/M/Y/K)

3.7 To Reproduce Hue Obtainable with Another Printer

(To use the ink simulation feature)

3.8 To Adjust Overall Brightness Easily

3.9 To Obtain A Sharper Image

Table of Contents

3.10 To Make Low-resolution Data Look Finer (To soften an image)

3.10.1 To Make Sharpness Settings

3.10.2 To Make Image Smoothing Settings

3.11 To Smoothen Text Edges or Image

3.11.1 To Disable Sharpness Settings

3.11.2 To Make Image Smoothing Settings

3.12 To Make Light-colored Fine Lines Look Sharper

3.12.1 To Adjust Halftone

3.12.2 To Make CMYK Simulation Profile Settings

3.13 To Make Large, Light-colored Text Clearer

3.14 To Make A Gray Area Look Smooth

3.15 To Print Light-colored Thin Lines Darkly

Table of Contents

e-STUDIO210c/310c, e-STUDIO211c/311c

1.1 To Obtain High-density Image in General

Before the adjustment After the adjustment

The copy image looks light and blurred. The copy image looks darker and sharper.

Explanation

When an original containing a photo or gradations is printed, the copy image sometimes looks light and blurred

in general. Perform automatic calibration (γadjustment) and calibration, and adjust the transfer bias to obtain

darker and sharper image in general.

Procedures

*Perform the adjustment in accordance with the procedures below.

*Procedures (1), (3) and (4) are used by the service technician only.

*Procedure (2) is used by the service technician, and by the user.

(1) Enter adjustment mode [05], select code [878], and press the [START] button.

• Image quality control will be forcibly performed to correct variations in density.

After executing the image quality control, print and check the image quality.

If further image quality adjustments are still necessary, use the next procedure.

1. General Adjustments – Copying and Printing

1.1

e-STUDIO210c/310c, e-STUDIO211c/311c

(2) Perform automatic calibration (γadjustment) or calibration to correct variations in image density.

To adjust the image quality in copying:

• Follow procedures (a) through (d) to perform automatic calibration (γadjustment).

(a)Select the "PROGRAM" menu from the Control Panel and select "CALIBRATION".

(b)Select "CALIBRATION" and print a test chart.

(c)Place the printed test chart on the glass.

(d)Press the [START] button to perform calibration. When the correction comes to an end, the message

"Wait Performing Auto Calibration" should disappear.

To adjust the image quality in printing:

Perform calibration with the printer controller to correct variations in image density.

• There are some calibration methods. They should be properly used to meet the level of the desired color

reproducibility.

*For the execution procedures of each calibration, refer to the Color Guide of each printer controller. For

cautions for performing calibration, refer to procedure (4) in "3.1 To Obtain Uniform Color Balance (To

perform calibration)."

AutoCal: A simplified calibration method using the scanner function of the copier. Calibration is

usually carried out by this method. You can perform this calibration from the Control Panel

or ColorWise Pro Tools of each printer controller. Note that the ColorWise Pro Tools runs

only on Windows or Macintosh OS 9.x / OS X Classic.

X-Rite DTP32: Accurate calibration is carried out using the auto scan color densitometer (X-Rite

DTP32). Use this method to standardize the color calibration or the color

reproducibility of more than one copier. X-Rite DTP32 is additionally required for

the adjustment.

*In addition to the above calibration methods, "Color Cal" and "EFI Densitometer" are also available.

For details of these methods, refer to the GA-1120 Color Guide.

After performing the automatic calibration (γadjustment) or calibration, print and check the image quality.

If further image quality adjustments are still necessary, use the next procedure.

1. General Adjustments – Copying and Printing

1.1

e-STUDIO210c/310c, e-STUDIO211c/311c

(3) Enter adjustment mode [05] and change the set value for code [356 to 360] or [315 to 317] to adjust the

transfer settings.

(Adjust the offset voltage of transfer bias so as to increase the density of the image quality.)

•The set value varies according to the paper mode. Select a [05] code for the paper mode for which you

want to change the image quality. Set the value within a range of default ±2 to obtain the highest density

of the image quality.

*Only the e-STUDIO211c/311c provide the paper modes, "Thick paper 4 (05-315)" and "Special paper (05-

316/317)".

For e-STUDIO210c/310c

Paper mode Color to be

adjusted [05] code Subcode Value

recommended

Permissible

value Default

Y (yellow) 0

M (magenta) 1

C (cyan) 2

Plain paper/thin paper

K (black)

05-356

2 to 6 0 to 8 4

Y 0

M 1

C 2

Thick paper 1

05-357

2 to 6 0 to 8 4

Y 0

M 1

C 2

Thick paper 2

05-358

2 to 6 0 to 8 4

Y 0

M 1

C 2

Thick paper 3

05-359

2 to 6 0 to 8 4

Y 0

M 1

C 2

OHP film

05-360

2 to 6 0 to 8 4

1. General Adjustments – Copying and Printing

1.1

Andere Handbücher für e-studio 210c

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba Multifunktionsdrucker Handbücher

Toshiba

Toshiba e-STUDIO203 Anleitung zur Verwendung

Toshiba

Toshiba e-STUDIO3510c Bedienungsanleitung

Toshiba

Toshiba E-studio5540c Originalbetriebsanleitung

Toshiba

Toshiba E-studio 281c Konfigurationshandbuch

Toshiba

Toshiba E-studio 477s Bedienungsanleitung

Toshiba

Toshiba e-studio 180s Bedienungsanleitung

Toshiba

Toshiba E-Studio 18 Bedienungsanleitung

Toshiba

Toshiba GD-1221 Bedienungsanleitung

Toshiba

Toshiba e-Studio 60F Bedienungsanleitung

Toshiba

Toshiba e-STUDIO 165 Bedienungsanleitung

Toshiba

Toshiba E-STUDIO 555 Bedienungsanleitung

Toshiba

Toshiba e-studio281c Bedienungsanleitung

Toshiba

Toshiba e-STUDIO163 Anleitung zur Verwendung

Toshiba

Toshiba e-STUDIO355 Bedienungsanleitung

Toshiba

Toshiba e-STUDIO2500c Bedienungsanleitung

Toshiba

Toshiba e-studio 520T Bedienungsanleitung

Toshiba

Toshiba E studio 2010C Bedienungsanleitung

Toshiba

Toshiba E-Studio167 Bedienungsanleitung

Toshiba

Toshiba IntranetFax Bedienungsanleitung

Toshiba

Toshiba e-studio 2822AM Bedienungsanleitung

Toshiba

Toshiba 352/452 Bedienungsanleitung

Toshiba

Toshiba e-STUDIO287CS Bedienungsanleitung

Toshiba

Toshiba E-Studio 5506AC Betriebsanleitung

Toshiba

Toshiba e-STUDIO 165 Montage- und Wartungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Canon

Canon ImageCLASS 2300 Handbuch

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Toshiba e-studio 210c Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken