Toshiba B-SX8T SERIES Bedienungsanleitung

TOSHIBA Barcode Printer

B-SX8T SERIES

Owner’s Manual

Mode d’emploi

Bedienungsanleitung

Manual de instrucciones

Gebruikershandleiding

Manuale Utente

Manual do Utilizador

CE Compliance (for EU only)

This product complies with the requirements of EMC and Low Voltage Directives including their

amendments.

VORSICHT:

• Schallemission: unter 70dB (A) nach DIN 45635 (oder ISO 7779)

• Die für das Gerät Vorgesehene Steckdose muß in der Nähe des Gerätes und leicht zugänglich sein.

by TOSHIBA TEC CORPORATION

ll Rights Reserved

570 Ohito, Izunokuni-shi, Shizuoka-ken, JAPAN

Centronics is a registered trademark of Centronics Data Computer Corp.

Microsoft is a registered trademark of Microsoft Corporation.

Windows is a trademark of Microsoft Corporation.

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable rotection

against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and sed in

accordance with the instruction manual, may cause harmful interference to radio communications.

Operations of this equipment in a residential area is likely to cause harmful interference in which case

the user will be required to correct the interference at his own expense. (for USA only)

Changes or modifications not expressly approved by manufacturer for compliance could void the

user’s authority to operate the equipment.

“This Class A digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.”

“Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel

brouilleur du Canada.” (for CANADA only)

< For EU Only >

TOSHIBA TEC Europe Retail Information Systems S.A.

Rue de la Célidée 33 BE-1080 Brussels

IP20

TOSHIBA Barcode Printer

B-SX8T SERIES

Owner's Manual

Waste Recycling information for users:

Following information is only for EU-member states:

The use of the crossed-out wheeled bin symbol indicates that this product

may not be treated as general household waste.

By ensuring this product is disposed of correctly you will help prevent

potential negative consequences for the environment and human health, which could

otherwise be caused by inappropriate waste handling of this product. For more detailed

information about the take-back and recycling of this product, please contact your supplier

where you purchased the product.

This product is equipped with a wireless communication device,

TRW-EUM-01 (B-SX708-RFID-U2-EU-R)

Please be sure to read the enclosed precaution for handling of wireless communication devices before using this product.

Precautions for Handling of Wireless Communication Devices

RFID kit: TRW-EUM-01 (B-SX708-RFID-U2-EU-R)

For all countries and areas

This product is a wireless communication device, and the use of this product is restricted to the following countries or areas. If the

product is used in the countries or areas other than the following, you may be punished according to the laws of those countries or

areas.

TRW-EUM-01 (B-SX708-RFID-U2-EU-R): Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Hungary,

Germany, Greece, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Slovakia, Slovenia, Spain,

Sweden, United Kingdom, Norway, Liechtenstein, Iceland, Switzerland

For safety

Do not use the product in locations where the use is forbidden, for example in a hospital.

When you do not know the forbidden areas, please refer to and follow the medical institution.

Otherwise medical equipment may be affected, causing a serious accident.

This product may affect the operation of some implanted cardiac pacemakers and other medically implanted equipment. Pace

maker patients should be aware that the use of this product very close to a pacemaker might cause the device to malfunction.

If you have any reason to suspect that interference is taking place, immediately turn off the product and contact your TOSHIBA

TEC sales agent.

Do not disassemble, modify, or repair the product.

Doing so may cause injury. Also, modification is against the Laws and Regulations for Radio Equipment. Please ask your TOSHIBA

TEC sales agent for repair.

For Europe

Hereby, Toshiba TEC Corporation, declares that this TRW-EUM-01 (B-SX708-RFID-U2-EU-R) are in compliance with the essential

requirements and other relevant provisions of Directive 1999/5/EC.

This equipment uses the radio frequency band which has not been harmonized throughout all EU and EFTA countries, and can be

used in the following countries.

Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Hungary, Germany, Greece, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, United Kingdom, Norway,

Liechtenstein, Iceland, Switzerland

Safety Summary ENGLISH VERSION EO1-33057

( )

Safety Summary

Personal safety in handling or maintaining the equipment is extremely important. Warnings and Cautions

necessary for safe handling are included in this manual. All warnings and cautions contained in this manual

should be read and understood before handling or maintaining the equipment.

Do not attempt to effect repairs or modifications to this equipment. If a fault occurs that cannot be rectified

using the procedures described in this manual, turn off the power, unplug the machine, then contact your

authorised TOSHIBA TEC representative for assistance.

Meanings of Each Symbol

This symbol indicates warning items (including cautions).

Specific warning contents are drawn inside the symbol.

(The symbol on the left indicates a general caution.)

This symbol indicates prohibited actions (prohibited items).

Specific prohibited contents are drawn inside or near the symbol.

(The symbol on the left indicates “no disassembling”.)

This symbol indicates actions which must be performed.

Specific instructions are drawn inside or near the symbol.

(The symbol on the left indicates “disconnect the power cord plug from the outlet”.)

This indicates that there is the risk of death or serious injury if the

machines are improperly handled contrary to this indication.

Do not use voltages other than

the voltage (AC) specified on the

rating plate, as this may cause

fire or electric shock.

Do not plug in or unplug the power

cord plug with wet hands as this

may cause electric shock.

If the machines share the same

outlet with any other electrical

appliances that consume large

amounts of power, the voltage

will fluctuate widely each time

these appliances operate. Be sure

to provide an exclusive outlet for

the machine as this may cause

fire or electric shock.

Do not place metal objects or

water-filled containers such as

flower vases, flower pots or mugs,

etc. on top of the machines. If

metal objects or spilled liquid enter

the machines, this may cause fire

or electric shock.

Do not insert or drop metal,

flammable or other foreign

objects into the machines through

the ventilation slits, as this may

cause fire or electric shock.

Do not scratch, damage or modify

the power cords. Also, do not

place heavy objects on, pull on, or

excessively bend the cords, as this

may cause fire or electrical shock.

If the machines are dropped or

their cabinets damaged, first turn

off the power switches and

disconnect the power cord plugs

from the outlet, and then contact

your authorised TOSHIBA TEC

representative for assistance.

Continued use of the machine in

that condition may cause fire or

electric shock.

Continued use of the machines in

an abnormal condition such as

when the machines are producing

smoke or strange smells may cause

fire or electric shock. In these

cases, immediately turn off the

power switches and disconnect the

power cord plugs from the outlet.

Then, contact your authorised

TOSHIBA TEC representative for

assistance.

ARNING

Any other than the

specified AC voltage

is prohibited.

Prohibited

Disconnect

the plug. Disconnect

the plug.

Safety Summary ENGLISH VERSION EO1-33057

( )

If foreign objects (metal

fragments, water, liquids) enter

the machines, first turn off the

power switches and disconnect

the power cord plugs from the

outlet, and then contact your

authorised TOSHIBA TEC

representative for assistance.

Continued use of the machine in

that condition may cause fire or

electric shock.

When unplugging the power cords,

be sure to hold and pull on the plug

portion. Pulling on the cord portion

may cut or expose the internal wires

and cause fire or electric shock.

Ensure that the equipment is

properly grounded. Extension

cables should also be grounded.

Fire or electric shock could

occur on improperly grounded

equipment.

Do not remove covers, repair or

modify the machine by yourself.

You may be injured by high

voltage, very hot parts or sharp

edges inside the machine.

This indicates that there is the risk of personal Injury or damage to

objects if the machines are improperly handled contrary to this indication.

Precautions

The following precautions will help to ensure that this machine will continue to function correctly.

•Try to avoid locations that have the following adverse conditions:

* Temperatures out of the specification * Direct sunlight * High humidity

* Shared power source * Excessive vibration * Dust/Gas

•The cover should be cleaned by wiping with a dry cloth or a cloth slightly dampened with a mild

detergent solution. NEVER USE THINNER OR ANY OTHER VOLATILE SOLVENT on the plastic

covers.

•USE ONLY TOSHIBA TEC SPECIFIED paper and ribbons.

•DO NOT STORE the paper or ribbons where they might be exposed to direct sunlight, high

temperatures, high humidity, dust, or gas.

•Ensure the printer is operated on a level surface.

•Any data stored in the memory of the printer could be lost during a printer fault.

•Try to avoid using this equipment on the same power supply as high voltage equipment or equipment

likely to cause mains interference.

•Unplug the machine whenever you are working inside it or cleaning it.

•Keep your work environment static free.

•Do not place heavy objects on top of the machines, as these items may become unbalanced and fall

causing injury.

•Do not block the ventilation slits of the machines, as this will cause heat to build up inside the machines

and may cause fire.

•Do not lean against the machine. It may fall on you and could cause injury.

•Care must be taken not to injure yourself with the printer paper cutter.

•Unplug the machine when it is not used for a long period of time.

•Place the machine on a stable and level surface.

Request Regarding Maintenance

•Utilize our maintenance services.

After purchasing the machine, contact your authorised TOSHIBA TEC representative for assistance

once a year to have the inside of the machine cleaned. Otherwise, dust will build up inside the machines

and may cause a fire or a malfunction. Cleaning is particularly effective before humid rainy seasons.

•Our preventive maintenance service performs the periodic checks and other work required to maintain

the quality and performance of the machines, preventing accidents beforehand.

For details, please consult your authorised TOSHIBA TEC representative for assistance.

•Using insecticides and other chemicals

Do not expose the machines to insecticides or other volatile solvents. This will cause the cabinet or

other parts to deteriorate or cause the paint to peel.

CAUTION

Disconnect

the plug.

Connect a

grounding wire.

Disconnect

the plug.

disassembling.

ENGLISH VERSION EO1-33057

TABLE OF CONTENTS

Page

1. PRODUCT OVERVIEW......................................................................................................... E1- 1

1.1 Introduction................................................................................................................... E1- 1

1.2 Features ....................................................................................................................... E1- 1

1.3 Accessories ................................................................................................................. E1- 2

1.4 Appearance.................................................................................................................. E1- 3

1.4.1 Dimensions................................................................................................................E1- 3

1.4.2 Front View .................................................................................................................E1- 3

1.4.3 Rear View..................................................................................................................E1- 3

1.4.4 Operation Panel.........................................................................................................E1- 4

1.4.5 Interior.......................................................................................................................E1- 4

1.5 Options................................................................................................................................E1- 5

2. PRINTER SETUP .................................................................................................................. E2- 1

2.1 Installation .................................................................................................................... E2- 2

2.2 Assembling the Supply Holder Frame.......................................................................... E2- 2

2.3 Connecting the Power Cord ......................................................................................... E2- 3

2.4 Loading the Media........................................................................................................ E2- 4

2.5 Loading the Ribbon ..................................................................................................... E2-14

2.6 Connecting the Printer to Your Host Computer........................................................... E2-17

2.7 Turning the Printer ON ................................................................................................ E2-18

2.8 Setting an Operating Environment .............................................................................. E2-19

2.8.1 Parameter Setting.....................................................................................................E2-20

2.8.2 Dump Mode Setting..................................................................................................E2-36

2.8.3 BASIC Expansion Mode...........................................................................................E2-38

2.8.4 Automatic Calibration ...............................................................................................E2-39

2.8.5 LAN Setting ..............................................................................................................E2-40

2.8.6 Real Time Clock Setting...........................................................................................E2-41

2.8.7 IP Address Setting (TCP/IP).....................................................................................E2-43

2.9 Installing the Printer Drivers ........................................................................................ E2-49

2.9.1 Introduction...............................................................................................................E2-49

2.9.2 General Description..................................................................................................E2-49

2.9.3 Installing the Printer Driver .......................................................................................E2-50

2.9.4 Uninstalling the Printer Driver...................................................................................E2-63

2.9.5 Adding/Deleting a LAN Port......................................................................................E2-64

2.9.6 Cautions ...................................................................................................................E2-66

2.9.7 Using the Printer Driver ............................................................................................E2-67

2.10 Print Test..................................................................................................................... E2-68

2.11 Position and Print Tone Fine Adjustment ................................................................... E2-70

2.12 Threshold Setting ........................................................................................................ E2-78

3. ON LINE OPERATION .......................................................................................................... E3- 1

3.1 Operation Panel............................................................................................................ E3- 1

3.2 Operation...................................................................................................................... E3- 2

3.3 Reset............................................................................................................................ E3- 2

ENGLISH VERSION EO1-33057

4. MAINTENANCE .................................................................................................................... E4- 1

4.1 Cleaning ....................................................................................................................... E4- 1

4.1.1 Print Head/Platen ......................................................................................................E4- 1

4.1.2 Pinch Roller...............................................................................................................E4- 2

4.1.3 Under the Media Guides............................................................................................E4- 5

4.1.4 Covers and Panels....................................................................................................E4- 6

4.1.5 Optional Cutter Module..............................................................................................E4- 7

4.1.6 Optional Strip Module................................................................................................E4- 9

5. TROUBLESHOOTING .......................................................................................................... E5- 1

5.1 Error Messages............................................................................................................ E5- 1

5.2 Possible Problems........................................................................................................ E5- 3

5.3 Removing Jammed Media............................................................................................ E5- 5

6. PRINTER SPECIFICATIONS ................................................................................................ E6- 1

7. SUPPLY SPECIFICATIONS ................................................................................................. E7- 1

7.1 Media............................................................................................................................ E7- 1

7.1.1 Media Type......................................................................................................... E7- 1

7.1.2 Detection Area of the Transmissive Sensor ....................................................... E7- 2

7.1.3 Detection Area of the Reflective Sensor............................................................. E7- 3

7.1.4 Effective Print Area............................................................................................. E7- 3

7.2 Ribbon.......................................................................................................................... E7- 4

7.3 Recommended Media and Ribbon Types .................................................................... E7- 4

7.4 Care/Handling of Media and Ribbon ............................................................................ E7- 5

APPENDIX 1 MESSAGES AND LEDS......................................................................................EA1-1

APPENDIX 2 INTERFACE .........................................................................................................EA2-1

APPENDIX 3 POWER CORD ....................................................................................................EA3-1

APPENDIX 4 PRINT SAMPLES ................................................................................................EA4-1

APPENDIX 5 GLOSSARIES ......................................................................................................EA5-1

INDEX

CAUTION!

1. This manual may not be copied in whole or in part without prior written permission of TOSHIBA

TEC.

2. The contents of this manual may be changed without notification.

3. Please refer to your local Authorised Service representative with regard to any queries you may

have in this manual.

This is a Class A product. In a domestic environment this product may cause radio interference in

which case the user ma

be re

uired to take ade

uate measures.

WARNING!

1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33057

1.1 Introduction

E1- 1

1. PRODUCT OVERVIEW

1.1 Introduction

1.2 Features

Thank you for choosing the TOSHIBA B-SX8T series thermal printer.

This Owner’s Manual contains from general set-up through how to

confirm the printer operation using an online test print, and should be

read carefully to help gain maximum performance and life from your

printer. For most queries please refer to this manual and keep it safe for

future reference. Please contact your TOSHIBA TEC representative for

further information concerning this manual.

This printer has the following features:

•Various kinds of interface

Various kinds of interface are provided:

• Parallel •Serial

• USB •Wireless LAN

•LAN •Expansion I/O

•Superior hardware

Clear print quality is realised by an 12 dots/mm (305 dpi) print head, at

a printing speed of 76.2 mm/sec. (3 inches/sec.), 101.6 mm/sec. (4

inches/sec.), or 203.2 mm/sec. (8 inches/sec.)

•Heavy-duty enclosure

As the enclosure is made of metal, the printer can be used in an

industrial environment such as a factory.

•A variety of options

The following optional devices are available:

• Cutter module

• Strip module

• Serial interface board

• Wireless LAN board

• RFID module (Future option)

• Metal Supply Cover (Future option)

• Expansion I/O board

• Real Time Clock

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba Barcode-Lesegerät Handbücher

Toshiba

Toshiba B-EV4D SERIES Bedienungsanleitung

Toshiba

Toshiba SX4T - TEC B B/W Direct Thermal Bedienungsanleitung

Toshiba

Toshiba B-SX6T Series Bedienungsanleitung

Toshiba

Toshiba TEC B-SX4T Series Bedienungsanleitung

Toshiba

Toshiba B-EV4 Series Bedienungsanleitung

Toshiba

Toshiba B-EV4T SERIES Bedienungsanleitung

Toshiba

Toshiba B-FV4D-GH Bedienungs- und Wartungsanleitung

Toshiba

Toshiba BV420D-GL02-QM-S Bedienungsanleitung

Toshiba

Toshiba BV420D Bedienungsanleitung

Toshiba

Toshiba B-SA4TM SERIES Bedienungsanleitung

Toshiba

Toshiba TEC B-442 Bedienungsanleitung

Toshiba

Toshiba B-452-R Bedienungsanleitung

Toshiba

Toshiba B-SX4T Series Bedienungsanleitung

Toshiba

Toshiba B-EX4 T1 Series Bedienungsanleitung

Toshiba

Toshiba B-EX6T Series Bedienungs- und Wartungsanleitung

Toshiba

Toshiba B-EV4D-GS24-CUS-R Bedienungsanleitung

Toshiba

Toshiba B-SV4T Bedienungsanleitung

Toshiba

Toshiba Bar Code Printer Bedienungsanleitung

Toshiba

Toshiba BA420T Series Bedienungsanleitung

Toshiba

Toshiba B-EX4 SERIES Bedienungs- und Wartungsanleitung

Toshiba

Toshiba B-SX600 SERIES Bedienungsanleitung

Toshiba

Toshiba B-SV4T Bedienungsanleitung

Toshiba

Toshiba B-EX4T2 SERIES Bedienungsanleitung

Toshiba

Toshiba B-EX4T2 SERIES Bedienungsanleitung

Beliebte Barcode-Lesegerät Handbücher anderer Marken

POSMicro

POSMicro Datalogic PowerScan D7100 Bedienungsanleitung

Marson

Marson MT780 Kurzanleitung zur Einrichtung

NCR

NCR RealPOS Bedienungsanleitung

Motorola

Motorola SE3300 Kurzanleitung zur Einrichtung

Element

Element P130BT Bedienungsanleitung

Motorola

Motorola Symbol LS3008 Installations- und Betriebshandbuch

Meec tools

Meec tools OBD-II / VAG Bedienungsanleitung

SICK

SICK CLP 100 Bedienungsanleitung

Royal Tag SA

Royal Tag SA I-Read Bedienungsanleitung

Welch Allyn

Welch Allyn IMAGETEAM 3800 Bedienungsanleitung

Meteor

Meteor 8310 Bedienungsanleitung

Denso

Denso BHT-500B Bedienungsanleitung

Datalogic

Datalogic Heron HD3130 Bedienungsanleitung

Motorola

Motorola MP6000 Montageanleitung

Newland

Newland NLS-HR15-BT Bedienungsanleitung

ARTDEV

ARTDEV AS-1310 Bedienungsanleitung

Aopos

Aopos AS290 Bedienungsanleitung

ENS

ENS 367-5455 Bedienungsanleitung