Toshiba Nv-pack JTLI41 Bedienungsanleitung

Unified Controller

nv-pack series

TC-net I/O Loop PCI ExpressTM Card JTLI41

Instruction Manual

6F8C1601

Notes

(1) The technical information described in this document is for the explanation of the typical operation of the product

and its application. It shall not be construed that Toshiba or third party will guarantee to use the intellectual

property or other rights concerning the said information or grant the license.

(2) Unauthorized reproduction of this Instruction Manual in whole or a part is prohibited.

(3) The contents of this document subject to change without prior notice.

(4) We extended all possible means to ensure the contents of this Instruction Manual, however, if you have any

questions, found any errors or noticed anything wrong, please contact us.

TC-net is registered trademark of Toshiba Corporation.

Ethernet is registered trademark of Xerox Corporation.

PCI Express is registered trademark of PCI-SGI.

Microsoft, Windows is registered trademark of U.S. Microsoft Corporation in the U.S. and other countries.

Linux is registered trademark or trademark of Mr. Linus Torvalds in the U.S., Japan and other countries.

Unified Controller nv-pack series TC-net I/O Loop PCI ExpressTM Card JTLI41 Instruction Manual

Safety Precautions

The product and the instruction manual describe important information to prevent possible

harm to users and damage to the property and to use the product safely.

Understand the following description (signs and symbols), read the text and follow the

instruction.

Description of signs

Sign Meaning of the sign

DANGER This indicates an immediate danger that may result in death or

serious injury*1 if not avoided.

WARNING This indicates a danger that may result in death or serious injury*1 if

not avoided.

CAUTION This indicates a danger that may result in minor or moderate injury*2

or only a physical damage*3 if not avoided.

*1: A serious injury indicates loss of sight, injury, burns (high/low temperature), electric shock,

broken bones, or intoxication that will have aftereffects and require hospitalization or

long-term hospital visits for healing.

*2: An injury indicates an injury, burn, or electric shock that does not need hospitalization or long-term

hospital visits for healing.

*3: Physical damage indicates consequential damage in terms of breakage of properties or materials.

Description of symbols

Symbol Meaning of the symbol

Prohibited

Indicates “Prohibition” or “You must not do”.

Specific details are indicated near the symbol with pictures and text.

Mandatory

Indicates “MandatoryAction” or “Do as indicated”.

Specific details are indicated near the symbol with pictures and text.

Warning

Indicates Warning.

Specific details are indicated near the symbol with pictures and text.

(Note) Descriptions of Prohibition, MandatoryAction, and Warning vary depending on the display on

the main unit.

6F8C1601

1. Safety Precautions in Installation

WARNING

Ground

Ground the device.

Otherwise, it may cause an electric shock

or fire.

Prohibited

DO NOT disassemble or adjust the optical

module.

The module won’t radiate harmful light but

may cause eye injury if it is disassembled or

adjusted by an unqualified person.

CAUTION

Prohibited

Do not install, store, or use it in the

following environments.

・A place with a lot of dust

・A place with corrosive gases (SO2,

H2S) or flammable gases

・A place with vibrations and shocks

exceeding the allowed values

・A place with condensations due to

rapid temperature changes

・A place with low or high temperature

outside of the installation condition

・A place with high humidity outside of

the installation condition

・A place with direct sunlight

・A place near equipment generating

strong radio waves or magnetic fields

It may cause accidents.

Mandatory

Install the device in a place where

maintenance and inspection can be

done easily.

Otherwise, it may cause accidents.

Prohibited

Do not block the ventilation hole or

air inlet/outlet.

It may cause fire or failure due to

overheat.

Mandatory

For installation and wiring of the

system, observe the installation

conditions and methods described in

this document.

Otherwise, it may cause a fall, fire,

failure, or malfunction.

Prohibited

Do not insert any foreign object such

as wasted lines into the module or

unit.

It may cause fire, failure, or malfunction.

Mandatory

Install the I/O module to the base

unit.

Otherwise, it may cause an electric

shock, injury, or failure.

Do not use it alone or for other purposes.

Mandatory

Install or remove the module, base

unit, and terminal block while the

power is off.

Otherwise, it may cause an electric

shock, malfunction, or failure.

Mandatory

When connecting the connectors

and cables or installing the module to

the base unit, press them fully until

they clicks, and secure them with

screws tightly.

Insufficient tightening may cause failure

or malfunction due to vibrations.

No touch

Do not touch parts, terminals,

connectors and soldered surface in

the module by bare hands.

The tip of lead may cause injury, or IC or

LSI may be destroyed by static electricity

resulting in mechanical failure.

Unified Controller nv-pack series TC-net I/O Loop PCI ExpressTM Card JTLI41 Instruction Manual iii

2. Safety Precautions in Wiring

WARNING

Mandatory

Connect the cables while the power

is off.

Otherwise, it may cause an electric shock

or failure.

Mandatory

When wiring the module, use crimp

contacts with sheath, or cover it with

tape.

Otherwise, exposed conductors may

cause an electric shock.

Mandatory

Install the terminal block cover

securely to the terminal block.

Exposed conducting parts may cause an

electric shock.

CAUTION

Mandatory

Connect an external power supply

that matches the rating.

Otherwise, it may cause an explosion or

fire.

Mandatory

Wiring work must be done by

qualified experts.

Wrong wiring may cause a fire, electric

shock, or failure.

Mandatory

Construct the emergency stop circuit

and interlock circuit outside the

nv-pack series.

Otherwise, it may cause an injury

accident or damage to the machine if

failure or malfunction occurs in the

nv-pack series.

6F8C1601

3. Safety Precautions in Daily Use

WARNING

No touch

Do not touch the terminals of the

module and unit during energization.

It may cause an electric shock.

Prohibited

Do not modify, repair, disassemble,

or adjust the device, module, or card.

It may cause an electric shock, fire, injury,

or failure.

Upon faulty operation or failure, contact

Toshiba's branch office or service offices.

Mandatory

Before using, check that the power

capacity, frequency, voltage, and

regulation comply with the device

specifications.

If not, it may cause damage of the

device, or fire due to overheat, as well as

not obtaining the original performance of

the device.

Prohibited

When the ambient or internal

temperature of the device rises

abnormally or failure occurs in the

device, stop using.

Using it as it is may cause fire due to

overheat.

Turn off the power of the device, and

contact one of Toshiba's service

representatives.

CAUTION

Mandatory

When performing program changes

during operation, forced output, run,

or halt operations, ensure safety.

Wrong operations or failure to ensure

safety may cause an accident or damage

to the machine.

Mandatory

When there is any smoke or strange

odor, turn off the power.

Otherwise, it may cause a fire or electric

shock.

Contact one of our branch offices or

service agencies.

Mandatory

Turn on the power in the following

order:

If this order is not followed, it may cause

an accident or damage to the machine

due to malfunction.

Prohibited

Do not forcefully bend, pull, or twist

the power cord and cables.

It may cause breaks or heating.

Prohibited

Do not insert metal parts or drop a

clip in the clearance of the controller.

It may cause fire.

Mandatory

For system safety, turn off the load

power before the power of the

nv-pack series.

If this order is not followed, it may cause

an accident or damage to the machine.

Share the external power supply for the

I/O module with the load power supply

whenever possible. If this is not

possible, construct the system so that the

external power supply and load power

supply are turned off simultaneously.

Turn on the power of the nv-pack series,

and then turn on the I/O module supply

external power and external load power.

Unified Controller nv-pack series TC-net I/O Loop PCI ExpressTM Card JTLI41 Instruction Manual v

4. Safety Precautions in Maintenance and Inspection

WARNING

Mandatory

When moun

ing or removing the

card, module, unit, terminal block, or

wiring cable, make sure that the

external power supply is off.

Otherwise, there will be live electric poles

on the back of the external terminal block

of the module, causing an electric shock.

Mandatory

When replacing the power fuse or

alarm fuse of the device, turn off the

device.

Otherwise, it may cause an electric shock

or fire.

Mandatory

Be extremely careful when measuring

the power supply voltage at the power

terminal part of the module during an

inspection.

Otherwise, it may cause an electric shock.

CAUTION

Prohibited

Do not hit or drop the device or card,

or give excessive impact.

Excessive impact can cause mechanical

failure.

Mandatory

Touch a grounded metal part to

discharge the static electricity on

your body before touching the device

or card.

Static electricity on your body may cause

malfunction or failure of the device or

card.

Mandatory

Use soft cloth to clean the device,

module and card.

Use water-dipped and firmly

squeezed cloth to clean excess dirt.

Leaving them dirty may cause

misjudgment or malfunction.

Mandatory

Mount the I/O module specially

designed for the series on the

dedicated base unit.

Failure to do this may cause electric

shock, injury or failure of the module.

Do not use the I/O module

independently or for other purposes.

Prohibited

Do not use benzene or thinner to

clean the device, module or card.

It may cause deformation or discoloration

of the device panel, module or card.

6F8C1601

5. Safety Precautions in Disposal

CAUTION

Mandatory

Dispose of the unit and module of

the nv-pack series as industrial

waste.

Otherwise, it may cause environmental

damage.

Unified Controller nv-pack series TC-net I/O Loop PCI ExpressTM Card JTLI41 Instruction Manual vii

Restrictions on Application

■This product is not developed/manufactured for use in systems involving devices that

directly affect human life (Note 1). Do not use them for such applications.

■To use this product for systems that involve devices that significantly affect human safety

or maintenance of public functions (Note 2), special considerations (Note 3) are required in

system operation, maintenance, and management. In this case, contact one of Toshiba's

sales representatives.

(Note 1) Devices that directly affect human life include the following.

Medical devices such as life supporting devices and devices for surgical units

(Note 2) Systems that involve devices that significantly affect human safety or

maintenance of public functions include the following.

Main unit control systems of nuclear power plants, safety protection systems of

nuclear facilities, and other systems that are critical for safety

Operation control systems of mass transportation systems and air traffic control

systems

(Note 3) Special considerations indicate sufficient discussions with Toshiba's engineers to

construct a safe system (e.g. employing fool-proof design, fail-safe design, or

redundant design).

Disclaimer

■Toshiba shall not be responsible for any damage caused by an earthquake, lightning and

wind, fire for which Toshiba is not responsible for, acts of a third party, other accidents, the

user's willful acts or negligence, misuse or use in abnormal conditions.

■Toshiba shall not be responsible for any incidental damage (loss of business profits,

interruption of business, change or loss of stored memory) caused by use of or unable to

use of this product.

■Toshiba shall not be responsible for any damage caused by failure to observe the

information described in the operation manual.

■Toshiba shall not be responsible for any damage caused by malfunctions due to

combination with any connected device.

■Toshiba shall not be responsible for any damage caused by malfunctions due to

combination with any application program created by the customer.

Requested matte

Use your cellular phone or PHS one meter or more away from the product

main unit in operation, various transmission cables, and I/O cable. Otherwise,

the system may malfunction.

6F8C1601

viii

This manual describes the overview, storage, handling, and maintenance/inspection of the

Unified Controller nv-pack series PCI Express Card JTLI41.

Before using the device, be sure to read “Safety Precautions” for proper operation of the

device.

Keep this manual in a safe place so that you can read it whenever necessary.

Repairs and replacements of this product due to the end of life or wear are charged even

during the warranty period.

The manuals related to the JTLI41 are as follows.

Unified Controller nv series Integrated Controller V series Programming Instructions

(6F8C1226)

Describes the detailed specifications of instruction words of the program languages (LD,

FBD, SFC and ST) supported by nv series and V series.

Unified Controller nv series Integrated Controller V series Engineering Tool 4 Operation

Manual -Basic- (6F8C1290)

Describes how to create, debug, print and save programs using nV-Tool.

Unified Controller nv series Integrated Controller V series Engineering Tool 4 Operation

Manual -Setup- (6F8C1291)

Describes how to set up nV-Tool.

Unified Controller nv-pack series Controller typeFR Instruction Manual (6F8C1379)

Describes the basic operation of Unified Controller nv-pack series typeFR.

Unified Controller nv-pack series Controller typeFR PLC Functional Manual (6F8C1616)

Describes the PLC function of Unified Controller nv-pack series type FR.

Introduction

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba Computerhardware Handbücher

Toshiba

Toshiba WN4301A-LF-JT Bedienungsanleitung

Toshiba

Toshiba Stratagy IVP8 Bedienungsanleitung

Toshiba

Toshiba Stratagy Flash Bedienungs- und Wartungsanleitung

Toshiba

Toshiba Desk Station V Plus Bedienungsanleitung

Toshiba

Toshiba SD-BT00A Bedienungsanleitung

Toshiba

Toshiba ETB004Z Bedienungsanleitung

Toshiba

Toshiba BCN002Z Bedienungsanleitung

Toshiba

Toshiba TMPR4925 Bedienungsanleitung

Toshiba

Toshiba CEX0122B Bedienungsanleitung

Toshiba

Toshiba Strata CIX40 Bedienungsanleitung

Toshiba

Toshiba Memory Module Stücklistenhandbuch

Toshiba

Toshiba TOSVERT VF-MB1/S15 IPE002Z Stücklistenhandbuch

Toshiba

Toshiba e-studio1058 Leitfaden

Toshiba

Toshiba ETB003Z Bedienungsanleitung

Toshiba

Toshiba TCB-PCIN3E Bedienungsanleitung

Toshiba

Toshiba D660 Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-MB1/S15 IPE002Z Stücklistenhandbuch

Toshiba

Toshiba TX39 Series Bedienungsanleitung

Toshiba

Toshiba TMP92CM22FG TLCS-900/H1 Series Bedienungsanleitung

Toshiba

Toshiba G7 Bedienungsanleitung

Toshiba

Toshiba E3 Bedienungsanleitung

Toshiba

Toshiba AD368 Bedienungsanleitung

Toshiba

Toshiba DA364/DA374 Bedienungsanleitung

Toshiba

Toshiba TCB-PSMT1E Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken

EMC2

EMC2 VNX Series Betriebsanleitung

Panasonic

Panasonic DV0PM20105 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung

Gigabyte

Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung

Raidon

Raidon iT2300 Bedienungsanleitung

National Instruments

National Instruments PXI-8186 Bedienungsanleitung

Hauppauge

Hauppauge WinTV-HVR-2250 Bedienungsanleitung

Kontron

Kontron CP6002 Bedienungsanleitung

Manhattan

Manhattan 702843 Bedienungsanleitung

Aphex

Aphex 230 Bedienungsanleitung

AMD

AMD Phenom II Betriebshandbuch

Intel

Intel NUC 12 Pro Bedienungsanleitung

dbx

dbx Zone Pro 1260 Bedienungsanleitung

Galaxy

Galaxy GHDX2-2430S-24F4D Bedienungsanleitung

Intel

Intel AXXRMFBU4 Bedienungsanleitung

Kontron

Kontron DIMM-PC/MD Bedienungsanleitung

ST X-NUCLEO-SAFEA1B Betriebsanleitung

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Bedienungsanleitung

Toshiba nv-pack JTLI41 Bedienungsanleitung

Beliebte Computerhardware Handbücher anderer Marken