Toshiba DeviceNet nv Series Bedienungsanleitung

Unified Controller

nv Series type1 light

DeviceNetTM Module DN611B

Instruction Manual

6F8C1686

About this document

(1) The technical information provided of this document describes typical operations and applications of the product

and does not guarantee the intellectual property rights or other rights of our company or third parties nor allows

license of its use.

(2) No part or the whole of this document may be reproduced without permission.

(3) The information of this document may be changed in the future without notice.

(4) All possible measures have been taken to prepare the information of this document, however, if you have any

question, comment, and find any error, please contact us.

TC-net and Unified Controller nv series are trademarks of Toshiba Infrastructure Systems Corporation.

Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation in the United States and

other countries.

Ethernet and Ethernet are registered trademarks or trademarks of Fuji Xerox Co., Ltd.

DeviceNet is a registered trademark of Open DeviceNet Vender Association Inc.

Power Tap, T-Port Tap, DeviceBox Tap and FLEX I/O are registered trademarks of Rockwell Automation Co., Ltd.

Intel and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United

States and other countries.

Safety Precautions

Unified Controller nv Series DeviceNet Module DN611B Instruction Manual

This product and instruction manual contains important information for safe and correct use to prevent danger

to the user and other people as well as damage to property.

Understand the following information (signs and symbols) before reading the text, and follow the instructions.

Description of signs

Sign

Meaning of sign

Warning

Indicates a potentially hazardous situation which, if not avoided, may result

in death or serious injury*1.

Caution

Indicates a potentially hazardous situation which, if not avoided, may result

in minor or medium injury*2 or only property damage*3.

*1: A serious injury indicates loss of sight, injury, burns (high/low temperature), electric shock, broken bones,

or intoxication that will have aftereffects and require hospitalization or long-term hospital visits for healing.

*2: An injury indicates injury, burn, or electric shock that does not need hospitalization or long-term hospital

visits for healing.

*3: A property damage indicates consequential damage in terms of breakage of properties or materials.

Description of symbols

Symbol

Meaning of symbol

Prohibited

Indicates prohibition (must not do).

The specific details of prohibition are indicated inside or near with pictures

or text.

Instruction

Indicates instruction (must do).

The specific details of instruction are indicated inside or near with pictures

or text.

(Note) The description of prohibition, instruction, and warning vary depending on the display on the main unit.

！

6F8C1686

1. Safety Precautions on Installation

Warning

Ground the device.

Operation without grounding may

cause electric shock or fire.

Caution

Do not install/store/use the device in

the following environments:

・A place with a lot of dust

・A place with corrosive gases (SO2,

H2S) or flammable gases

・A place with vibrations and shocks

exceeding the allowed values

・A place with condensations due to a

sudden temperature change

・A place with low or high temperature

outside of the installation condition

・A place with high humidity which is

outside of the installation condition

・A place exposed to direct sunlight

・A place near devices generating

strong radio waves or magnetic fields

Otherwise, accidents may be caused.

Install the device at a place where

maintenance and inspection are

easy to perform.

Otherwise, accidents may be caused.

Do not block the ventilation hole or air

inlet/outlet.

It may cause fire or failure due to

overheat.

For installation and wiring of the system,

observe the installation conditions and

methods described in this manual.

Otherwise, it may cause a fall, fire,

failure, or malfunction.

Do not install and store the relay

output module under the following

conditions

・A place where there is silicon gas

・A place with silicon products are used

These may cause poor contact.

Avoid foreign debris like wire

scraps entering the modules or

units

These may cause fire, failure, or

malfunction.

Turn power off before installing and

removing the modules, the base

unit, or the terminal blocks

Otherwise, it may cause electric shock,

malfunction, or failure.

When connecting a connector or

cable and mounting a module to the

base unit, push it in until it clicks

and screw it firmly

Insufficient screwing can cause failure

or malfunction due to vibrations.

Ground

Instruction

Unified Controller nv Series DeviceNet Module DN611B Instruction Manual

iii

2. Safety Precautions on Wiring

Warning

Turn off the power before wiring

cables

Otherwise, it may cause electric shock

or failure.

For wiring a module, use sheathed,

crimp-style terminals or cover with

tape

Otherwise, conductive parts are

exposed to cause electric shock.

Mount the terminal block cover

firmly to the terminal block

Exposed parts may cause electric

shock.

Caution

Connect an external power supply

suitable for the rating

Otherwise, explosion or fire may be

caused.

For the relay output module, mount

a fuse suitable for the current

capacity to the external circuit for

overload protection

Otherwise, a load short may cause

accident or machine damage.

The emergency stop circuit,

interlock circuit, etc. are configured

outside the nv series.

If the nv series breaks down or

malfunctions, it may cause personal

injury or mechanical damage.

6F8C1686

3. Safety Precautions on Daily Use

Warning

Do not touch any terminal of the

module and unit during

energization.

Otherwise, electric shock may be

caused.

Do not modify / repair /

disassemble / adjust the device,

module, or board.

It may cause electric shock, fire, injury,

or failure.

Upon malfunction or failure, contact our

branch offices or service offices.

Before using, check that the power

capacity, frequency, voltage, and

regulation comply with the device

specifications.

If not, it may cause not only insufficient

performance, but also damage of the

device or fire due to overheat.

Do not use in case of an abnormal

temperature increase around or

inside the device or a failure on the

device

Using with such a status may cause fire

due to overheat.

Turn off the device power and contact

the nearest our service station.

Caution

When you attempt to perform

program change, forced output,

RUN/HALT controls, etc. during

operation, carefully check for safety

Incorrect operation or negligence in

checking safety conditions may cause

accident or machine damage.

Turn off the power if there is smoke

or abnormal odor

Otherwise, fire or electric shock may be

caused.

Contact the our branch office or service

office.

Do not forcibly bend, pull, or twist

the power cord and cables.

It may cause breaks or heating.

Do not insert a metal into, or allow

something like a clip to drop from a

gap in the device main unit

Fire may be caused.

Unified Controller nv Series DeviceNet Module DN611B Instruction Manual

Power on in the following order

Power on the nv series unit 

expansion units I/O module

external power supply and external

load power supply

If this power-on order is not followed,

accident or machine damage may be

caused from malfunctioning.

For the safety of the system, turn

off the load power before turning off

the nv series power supply

If these are not followed. accident or

machine damage may be caused.

Share the external power supply to the

I/O module with the load power supply

wherever possible. If this is impossible,

configure the system so that the

external power supply and the load

power supply turn off simultaneously.

4. Safety Precautions on Maintenance and Inspection

Warning

Make sure the external power

supply is turned off before installing

and removing the modules, units,

terminal blocks, and wiring cables

Otherwise, there will be live electrode

on the back of the external terminal

block of the module, which may cause

electric shock.

Do not connect in reverse, charge,

disassemble, heat up, throw in a fire,

and short circuit the battery

Otherwise, explosion or catching fire

may be caused.

Turn off the device switch before

replacing the power fuse or alarm

fuse for the device

Operation without grounding may cause

electric shock or fire.

Use the specified items for fuse and

battery replacement.

Other items may cause fire or failure.

At inspection, be extremely careful

when measuring the power-supply

voltage at the module’s power

terminal

Otherwise, it may cause electric shock.

6F8C1686

5. Safety Precautions on Disposal

Warning

Do not throw lithium batteries into a

fire

There is a risk of explosion.

Caution

When disposing of lithium batteries,

observe the local regulations or

rules

Otherwise, they may cause

environmental damage.

Dispose of the units and modules

as industrial wastes

Otherwise, they may cause

environmental damage.

Unified Controller nv Series DeviceNet Module DN611B Instruction Manual

vii

Restrictions on Application

This product is not developed and manufactured for use in systems including devices fatal to humans

(Note 1),

and thus must not be used for such purposes.

If you intend to use this product in a system including devices that significantly affect human safety or

maintenance of public functions (Note 2), special consideration (Note 3) is required in system operation,

maintenance, and management. In this case,

please consult with our sales representative.

(Note 1) Devices that are directly related to human lives includes the following:

•Medical devices such as life-support devices and devices for surgical units

(Note 2) Systems including devices that significantly affect human safety or maintenance of public

functions include the followings.

•Main control system of a nuclear power plant, the safety and protection system of a

nuclear power facility, and other lines and systems important to safety

•Operation control systems of mass transportation system and air traffic control systems

(Note 3) Special consideration means to build a safety system (foolproof design, fail safe design,

redundancy design, etc.) in full consultation with Toshiba’s engineers.

Disclaimer

Toshiba Infrastructure Systems & Solutions Corporation is not liable for any loss caused by earthquake,

thunder, wind, flood, fire not our responsibility, action by a third party, other accidents, customer’s

intention or negligence, incorrect use, or use under abnormal condition.

Toshiba Infrastructure Systems & Solutions Corporation shall not be responsible for any incidental

damage (loss of business profits, interruption of business, change/loss of data on memory, etc.) caused

by use of or inability to use this product.

Toshiba Infrastructure Systems & Solutions Corporation shall not be responsible for any damage caused

by operation performed against any instructions stated in the instruction manual.

Toshiba Infrastructure Systems & Solutions Corporation shall not be responsible for any damage caused

by malfunctions due to combination with the connected devices.

Toshiba Infrastructure Systems & Solutions Corporation shall not be responsible for any damage caused

by malfunctions due to combination with an application program created by the customer.

6F8C1686

viii

Precautions for Use

About installation

•Do not drop the device and modules, hit them, or give a strong shock on them.

Otherwise, failure may be caused.

•Use your cellular phone or PHS at least 1m away from the product main unit in operation, transmission

cables, and I/O cable. Otherwise, the system may malfunction.

•When connecting a connector or cable and mounting a module to the base unit, firmly fix it with screws.

Insufficient screwing can cause failure or malfunction due to vibrations.

About power supply wiring

•Separate the cables as far as possible from other cables. In particular, separate them at least 200mm

from power lines.

•The size of the terminal screw is M3.5. Use an appropriate crimp-style terminal with a width of 5.5mm or

less for the M3.5 screw.

•To avoid breaking the screw, use a screwdriver that matches the screw.

•Do not connect anything to the NC terminals and terminal or pins that are not described.

About use of sample programs

•For the sample programs provided in the Operating Instructions, the customer shall make operation

check before using them.

To prevent accident from malfunctioning, confirm adequately before operating.

About maintenance

•Be careful of static electricity when handling the module removed from the base unit.

Place the module removed from the unit on a conductive mat or conductive bag (a bag containing a

spare board, etc.) on a grounded table.

Otherwise, parts can be damaged due to static electricity.

•Before touching the device or modules, touch a grounded metal part to discharge the static electricity on

your body. Otherwise, static electricity on your body can cause malfunction or failure.

•When holding the module, hold the handle or ejector on the front panel, and do not hold the printed

circuit board part directly. The static electricity charged on your hand may damage the parts, the electric

charge on the circuit may cause an electric shock, or the circuit part may injure your hand.

•Wipe the dirt on the device or modules with a soft cloth.

For severe stains, use a cloth soaked with water and wrung out.

Leaving them stained may cause misjudgment or malfunction.

•Do not use benzene or thinner to remove stains on the device and modules.

It may cause deformation or discoloration of the device panel and modules.

•To keep the system normal and prevent unnecessary troubles, perform the daily inspection, periodic

inspection, and cleanup.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba Controller Handbücher

Toshiba

Toshiba Programmable Controller PROSEC T3 Bedienungsanleitung

Toshiba

Toshiba 2000 Bedienungsanleitung

Toshiba

Toshiba SX 2000 Bedienungsanleitung

Toshiba

Toshiba GX9 ASD Bedienungsanleitung

Toshiba

Toshiba V Series Bedienungsanleitung

Toshiba

Toshiba TD Series Bedienungsanleitung

Toshiba

Toshiba OIS PLUS Series Bedienungsanleitung

Toshiba

Toshiba V Series Bedienungsanleitung

Toshiba

Toshiba V Series Bedienungsanleitung

Toshiba

Toshiba V Series Bedienungsanleitung

Toshiba

Toshiba TS3000 Series Bedienungsanleitung

Toshiba

Toshiba RBC-EXW21E2 Bedienungsanleitung

Toshiba

Toshiba RBC-AWSU52-E Bedienungsanleitung

Toshiba

Toshiba Q9 Plus ASD Bedienungsanleitung

Toshiba

Toshiba TS3000 Series Bedienungsanleitung

Toshiba

Toshiba V Series Bedienungsanleitung

Toshiba

Toshiba TS2000 Bedienungsanleitung

Toshiba

Toshiba TS3000 Series Bedienungsanleitung

Toshiba

Toshiba VF010H05 Bedienungsanleitung

Toshiba

Toshiba TMP87CM24AF Gebrauchsanweisung

Toshiba

Toshiba 40 Plus Bedienungsanleitung

Toshiba

Toshiba LC531 Series Bedienungsanleitung

Toshiba

Toshiba JKSSS Series Bedienungsanleitung

Toshiba

Toshiba TOSVERT VF-S15 series Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch