Toshiba G3 Plus Pack Bedienungsanleitung

6F8C1590

Unified Controller

nv Series

G3 I/O Adapter Module GA932

Instruction Manual

Notes

(1) The technical information provided herein describes typical operations and applications of the product and does not

guarantee the intellectual property rights or other rights of Toshiba or third parties nor allows license of its use.

(2) No part or the whole of this document may be reproduced without prior consent.

(3) The information herein may be changed in the future without notice.

(4) All possible measures have been taken to prepare the information herein. If you have any question, comment, or find

any error, please contact us.

PROSEC, TOSLINE, TC-net are trademarks or registered trademarks of Toshiba Corporation.

Ethernet is trademarks or registered trademarks of Fuji Xerox Corporation.

Device Net is registered trademarks or registered trademarks of ODVA(Open Device Net Vender Association Inc.)

PROFIBUS is registered trademarks or registered trademarks of PROFIBUS User Organization.

MODBUS is registered trademarks or registered trademarks of Schneider automation Inc.

MELSECNET is registered trademarks or registered trademarks of Mitsubishi Electric Corporation.

UNI-WIRE is registered trademarks or registered trademarks of KURODA Pneumatics Industries Ltd.

Temposonics is registered trademarks or registered trademarks of US company MTS Systems Corporation.

Absocoder is registered trademarks or registered trademarks of SG Corporation.

Unified Controller nv series G3 I/O Adapter GA932 Module Instruction Manual i

Safety Precautions

On the product and this instruction manual, important information for safe and correct use to

prevent danger to the user and other people as well as property damage is described.

Understand the following information (signs and symbols) before reading the text, and follow

the described items.

Description of signs

Sign Description

DANGER Indicates that failure to avoid it will result in an immediate ris of

death or serious injury (*1).

WARNING

Indicates that failure to avoid it will result in a ris of death or serious

injury (*1).

CAUTION

Indicates that failure to avoid it will result in a ris of light or medium

injury (*2) or only property damage (*3).

*1: A serious injury indicates loss of sight, injury, burns (high/low temperature), electric shoc ,

bro en bones, or intoxication that will have aftereffects and require hospitalization or long-term

hospital visits for healing.

*2: An injury indicates an injury, burn, or electric shoc that does not need hospitalization or

long-term hospital visits for healing.

*3: Property damage indicates consequential damage in terms of brea age of properties or materials.

Description of symbols

Symbol Meaning

Prohibited

Indicates “Prohibition” or “You must not do”.

Specific details are indicated near the symbol with pictures and text.

Mandatory

Indicates “Mandatory Action” or “Do as indicated”.

Specific details are indicated near the symbol with pictures and text.

Warning

Indicates Warning.

Specific details are indicated near the symbol with pictures and text.

(Note) Descriptions of Prohibition, Mandatory Action, and Warning vary depending on the display on

the main unit.

6F8C1590

1. Safety Precautions on Installation

WARNING

Ground

Ground the device.

Otherwise, it maycause an electric shock

or fire.

Mandatory

Configure the emergency stop

circuit and the interlock circuit

outside the controller.

Otherwise, this may cause human injury

or machine damage if the nv series has

a failure or malfunction.

CAUTION

Prohibited

Do not install, store, or use it

in the following environments.

・A place with a lot of dust

・A place with corrosive gases (SO

S) ore flammable gases

・A place with vibrations and shocks

exceeding the allowed values

・A place with condensations due to

rapid temperature changes

・A place with low or high temperature

outside of the installation condition

・A place with high humidity outside of

the installation condition

・A place with direct sunlight

・A place near equipment generating

strong radio waves or magnetic fields

It may cause accidents.

Mandatory

Install the device in a place where

maintenance and inspection can be

done easily.

Otherwise, it may cause accidents.

Prohibited

Do not block the ventilation

hole or air inlet/outlet.

It may cause fire or failure due to

overheat.

Mandatory

For installation and wiring of

the system, observe the

installation conditions and

methods described in this

document.

Otherwise, it may cause a fall, fire,

failure, or malfunction.

Unified Controller nv series G3 I/O Adapter (GA932) Module Instruction Manual iii

2. Safety Precautions on Maintenance and Inspection

WARNING

Mandatory

When installing or removing

the module after wiring, turn

off the external power.

Otherwise, causing an electric shock

by touching conductive part.

CAUTION

Prohibited

Do not drop, crush, or apply

strong shocks to the device or

board.

It may cause failure.

Mandatory

Before touching the device or

board, touch a grounded

metal to discharge the static

electricity of your body.

Otherwise, it may cause malfunction or

failure due to static electricity.

Mandatory

Wipe off stain on the device,

module, or board with a soft

cloth.

For severe stain, use a wet cloth wrung

tightly.

Leaving them stained may cause wrong

decision or malfunction.

Mandatory

Place a board or module

removed from the unit or base

unit on a conductive mat or

conductive bag (used for a

backup board, etc.) on a

grounded table.

Otherwise, parts may be damaged due

to static electricity.

Prohibited

Do not use benzene or thinner

to remove stain on device,

module, or board.

It may cause deformation or

discoloration of the device panel,

module, or board.

6F8C1516

3. Safety Precautions on Replacement of Life Limited Parts

WARNING

Mandatory

When replacing fuses, turn off

the switch of the device.

Otherwise, it may cause an electric

shock or fire.

4. Safety Precautions on Daily Use

WARNING

No touch

Do not touch the terminals of

the module and unit during

energization.

It may cause an electric shock.

Prohibited

Do not modify, repair,

disassemble, or adjust the

device, module, or board.

It may cause an electric shock, fire,

injury, or failure.

Upon faulty operation or failure, contact

Toshiba's branch office or service

offices.

Mandatory

For capacity, frequency,

voltage, and regulation,

please use a power supply

conforming to the

specification.

If not, it may cause damage of the

device, or fire due to overheat, as well

as not obtaining the original

performance of the device.

Mandatory

When the device temperature

rises abnormally or failure

occurs in the device, stop

using and turn off the power,

then contact to one of

Toshiba's service

representatives.

Using it as it is may cause fire due to

overheat.

Unified Controller nv series G3 I/O Adapter (GA932) Module Instruction Manual v

CAUTION

Prohibited

Do not touch anything other

than the operation part

(setting switches inside the

module), such as the IC parts

and terminals, connectors,

and soldered surfaces inside

the module.

Doing so may result in electrostatic

breakdown of the ICs and LSIs, causing

failure. Also, an injury may occur due

to the ends of the part lead wires, or

burns may occur due to hot parts.

Prohibited

Do not disassemble or modify

the device or module.

It may cause malfunction or failure as

well as loss of safety of the device.

Prohibited

Do not forcefully bend, pull, or

twist the power cord and

cables.

It may cause breaks or heating.

Prohibited

Do not insert any metal inside

the module.

It may cause fire.

Mandatory

Use wireless communication

equipments as mobile phone,

smart phone and transceiver

at least 30cm away from the

module, transmission cables

and I/O cable.

It may cause malfunctions.

Safety Precautions on Transportation, Storage, and Disposal

CAUTION

Mandatory

Observe ordinances and

rules.

When discarding the product, observe

the ordinances and rules of the local

government.

Prohibited

For transportation and storage

of the product, use a

conductive bag and packaging

box.

Otherwise it will cause failure.

6F8C1516

Restrictions on Application

This product is not developed/manufactured for use in systems involving devices that

directly affect human life (Note 1). Do not use them for such applications.

To use this product for systems that involve devices that significantly affect human safety

or maintenance of public functions (Note 2), special considerations (Note 3) are required

in system operation, maintenance, and management. In this case, contact one of

Toshiba's sales representatives.

(Note 1) Devices that directly affect human life include the following.

• Medical devices such as life supporting devices and devices for surgical units

(Note 2) Systems that involve devices that significantly affect human safety or

maintenance of public functions include the following.

• Main unit control systems of nuclear power plants, safety protection systems of

nuclear facilities, and other systems that are critical for safety

• Operation control systems of mass transportation systems and air traffic control

systems

(Note 3) Special considerations indicate sufficient discussions with Toshiba's engineers to

construct a safe system (e.g. employing fool-proof design, fail-safe design, or

redundant design).

Important matter

Unified Controller nv series is intended for persons with general nowledge of control

equipment regarding its installation, wiring, use and maintenance. Erroneous use can

result in electrical shoc , fire or malfunction. Therefore if you do not have sufficient

control equipment and electric nowledge avoid performing installation, wiring, use or

maintenance by yourself and as a person with specialized nowledge to do the wor .

This manual and the separate related materials are intended for persons with general

nowledge of control equipment. Contact us for any questions about the contents.

Disclaimer

Toshiba shall not be responsible for any damage caused by an earthqua e, thunderstorm,

and flood damage, fire for which Toshiba is not responsible for, acts of a third party, other

accidents, the user's willful acts or negligence, misuse, or use in abnormal conditions.

Toshiba shall not be responsible for any incidental damage (loss of business profits,

interruption of business, change or loss of stored memory) caused by use of or being

unable to use this product.

Toshiba shall not be responsible for any damage caused by failure to observe the

information described in the operation manual.

Toshiba shall not be responsible for any damage caused by malfunctions due to

combination with any connected device.

Toshiba shall not be responsible for any damage caused by malfunctions due to

combination with any application program created by the customer.

Unified Controller nv series G3 I/O Adapter (GA932) Module Instruction Manual vii

This manual describes the overview, installation, operation and maintenance/inspection of

G3 I/O adapter module (hereafter called "GA932 module" or simply called "GA932). This

module connects I/O (G3 I/O) of PROSEC T series T3/T3H into Unified Controller nv series

type 1 light (PUM12). To use this device correctly, read "Safety precautions" first. For this

product, the repair and replacement due to wear or abrasion will be charged even during the

warranty period.

The manuals for GA932 module are as follows.

• Unified Controller nv series type 1 light Users manual – Basic hardware- (6F8C1497)

describes the main unit hardware of nv series type 1 light controller.

• Unified Controller nv series type 1 light Function Manual (6F8C1498)

Describes the functions and basic use of nv series type 1 light.

• Unified Controller nv series type 1 light T series Migration Hardware Manual

(6F8C1619)

Describes how to migrate from T series to nv series type 1 light.

• Unified Controller nv series type 1 light T series Migration Guide (6F8C1587)

Describes how to convert the system data from T series to nv series type 1 light.

• Unified Controller nv series/Integrated Controller V series

Programming Instructions (6F8C1226)

Describes the detailed specifications of the instruction words of the program languages

(LD, FBD, SFC, ST) supported by the nv series and Integrated Controller V series.

• Unified Controller nv series/Integrated Controller V series Engineering Tool 4 -Basic-

(6F8C1290)

Describes how to create, debug, print, and save programs using nV-Tool.

• Unified Controller nv series/Integrated Controller V series Engineering Tool 4 -Setup-

(6F8C1291)

Describes the method to set up nV-Tool.

• Unified Controller nv series High-speed Serial I/O System

TC-net I/O Instruction Manual (6F8C1240)

Describes TC-net I/O system, which is nv series high-speed serial I/O system.

• PROGRAMMABLE CONTROLLER PROSEC T3H USER’S MANUAL (UM-TS03***-E032)

Describes T3/T3H main unit system. Also describes General purpose digital I/O,

Analog I/O , and G3 I/O except Special I/O.

Note

Please refer to the instruction manual of each module about special

G3 I/O (Transmission module)

The figure used in the explanation is inserted to ma e it easier to understand of the

reader, and it is not necessarily the same as the actual product. Please understand we

may carry out improvement without particular notice in order to improve performance

and function.

Introduction

6F8C1516

viii

●Notational conventions

The following are the notational conventions for better understanding of this document.

Important:

Describes what the user should be particularly aware of to handle the product correctly.

Note:

Describes what the user should observe to handle the product correctly.

Remark:

Describes a remark.

●Reading this document

This document consists of the following chapters.

• Chapter 1 Introducing GA932 Module

Describes the functions, characteristics, and names and functions of the

parts of the module.

• Chapter 2 Installation and Wiring

Describes how to install it to the basic unit and how to connect cables.

• Chapter 3 Setting

Describes how to set the switches for using the module correctly.

• Chapter 4 Startup and Shutdown

Describes how to do a chec before operation and how to start up and shut

down the module.

• Chapter 5 Troubleshooting

Describes troubleshooting such as what to do when failure occurs.

• Chapter 6 Maintenance and Inspection

Describes troubleshooting regarding daily inspection and periodical

inspection and how to perform inspections.

Andere Handbücher für G3 Plus Pack

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba Controller Handbücher

Toshiba

Toshiba TS3000 Series Bedienungsanleitung

Toshiba

Toshiba CONNECT Bedienungsanleitung

Toshiba

Toshiba nv Series Bedienungsanleitung

Toshiba

Toshiba TCB-TSC640-PY Bedienungsanleitung

Toshiba

Toshiba V Series Bedienungsanleitung

Toshiba

Toshiba BMS-CT1280UL Bedienungsanleitung

Toshiba

Toshiba Network Device OIS120 Bedienungsanleitung

Toshiba

Toshiba nv Series Bedienungsanleitung

Toshiba

Toshiba TS1000 Installations- und Betriebshandbuch

Toshiba

Toshiba TCB-IFDA1GUL Bedienungsanleitung

Toshiba

Toshiba JK Series Bedienungsanleitung

Toshiba

Toshiba JK Series Bedienungsanleitung

Toshiba

Toshiba V200 Series Bedienungsanleitung

Toshiba

Toshiba TCB-IFCB-4E2 Bedienungsanleitung

Toshiba

Toshiba LC531 Series Bedienungsanleitung

Toshiba

Toshiba AS311 Bedienungsanleitung

Toshiba

Toshiba nv Series Bedienungsanleitung

Toshiba

Toshiba TCB-SC640U Bedienungsanleitung

Toshiba

Toshiba PROSEC T1 Bedienungsanleitung

Toshiba

Toshiba SX 2000 Bedienungsanleitung

Toshiba

Toshiba RBC-AWSU52-E Bedienungsanleitung

Toshiba

Toshiba TS2000 Bedienungsanleitung

Toshiba

Toshiba RBC-MTSC2 Bedienungsanleitung

Toshiba

Toshiba BMS-CT2560U-E Service-Handbuch

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch