English
3
To avoid a fire, electric shocks, burns, injuries, or other problems
Power cord and power plug
Do not damage, sharply bend, stretch, twist, bundle, pinch, modify, or place heavy objects on the
power cord.
Do not use the power cord or power plug (power supply side or stand side) if it is damaged or if the
power plug is loose when plugged into the electrical outlet.
zy Plug the power plugs in completely.
Do not allow the power cord to touch hot parts (soleplate, cover, stand, metal parts, etc.).
To avoid a fire, electric shocks, burns, injuries, or other problems
Handling and usage
Place the case securely on the stand.
zy If only one side of the case is hooked, the iron and
stand will fall down when you pick it up.
Do not press the shot button if shots are
weak.
Drops of hot water may come out and cause burns.
Use [Dry] to iron damp clothes (clothes that
have been sprayed with mist).
Ironing with the [Steam] setting may cause drops of
hot water to come out and cause burns.
Do not spray hot steam or shots on your
hands or knees. Do not spray hot steam or
shots on clothing while someone is wearing
it.
With some ironing boards, hot steam or drops of hot
water may pass through and cause burns.
zy When using Point press, be careful that steam does
not get on you, and do not press the Shot button.
Do not touch hot parts (soleplate, cover,
stand, metal parts, etc.).
Be careful to not touch the soleplate after ironing.
Do not put pins or wires into the iron, and do
not iron clothes in which there are needles.
They could cause damage or a short if they get into
the iron.
Do not press the shot button rapidly again
and again.
Drops of hot water may come out and cause burns or
stain clothing.
zy Do not press it faster than every two seconds.
After using the iron, do not leave the Steam /
Dry lever in the Steam position.
The remaining water will run into the base, and as
a result, the next time you use the iron it may cause
burns.
Do not iron clothes at a higher temperature
than that indicated by the icon on the label.
It may damage the fabric.
Do not use anything that emits flammable
gas (benzene, etc.) near the iron.
Do not tilt the iron, shake it back and forth,
or drop it.
Both ends of the soleplate are sharp and may dam-
age the floor, or cause injuries, burns, or water leaks.
Unplug the power plug from the electrical
outlet before adding water to the water
tank.
It could cause electric shock.
Do not allow dirt or pins to get on the
contacts in the stand.
