Toshiba A105-S4004 - Satellite - Core Duo 1.66 GHz Bedienungsanleitung

PMAD00063010

11/05

Satellite®A100/A105

User’s Guide

If you need assistance:

❖Toshiba’s Support Web site

pcsupport.toshiba.com

❖Toshiba Global Support Centre

Calling within the United States (800) 457-7777

Calling from outside the United States (949) 859-4273

For more information, see “If Something Goes Wrong” on

page 172 in this guide.

5.375 x 8.375 ver 2.3

Handling the cord on this product will expose you to lead, a

chemical known to the State of California to cause birth defects

or other reproductive harm. Wash hands after handling.

Model: Satellite®A100/A105

Recordable and/or ReWritable Drive(s) and

Associated Software Warranty

The computer system you purchased may include Recordable and/or

ReWritable optical media drive(s) and associated software, among the most

advanced data storage technologies available. As with any new technology,

you must read and follow all set-up and usage instructions in the applicable

user guides and/or manuals enclosed or provided electronically. If you fail

to do so, this product may not function properly and you may lose data or

suffer other damage. TOSHIBA AMERICA INFORMATION SYSTEMS,

INC. (“TOSHIBA”), ITS AFFILIATES AND SUPPLIERS DO NOT

WARRANT THAT OPERATION OF THE PRODUCT WILL BE

UNINTERRUPTED OR ERROR FREE. YOU AGREE THAT TOSHIBA,

ITS AFFILIATES AND SUPPLIERS SHALL HAVE NO

RESPONSIBILITY FOR DAMAGE TO OR LOSS OF ANY BUSINESS,

PROFITS, PROGRAMS, DATA, NETWORK SYSTEMS OR

REMOVABLE STORAGE MEDIA ARISING OUT OF OR RESULTING

FROM THE USE OF THE PRODUCT, EVEN IF ADVISED OF THE

POSSIBILITY THEREOF.

Protection of Stored Data

For your important data, please make periodic back-up copies of all the data

stored on the hard disk or other storage devices as a precaution against possible

failures, alteration, or loss of the data. IF YOUR DATA IS ALTERED OR

LOST DUE TO ANY TROUBLE,FAILURE OR MALFUNCTION OF

THE HARD DISK DRIVE OR OTHER STORAGEDEVICES AND THE

DATA CANNOT BE RECOVERED, TOSHIBA SHALL NOT BE

LIABLE FOR ANY DAMAGE OR LOSSOF DATA, OR ANY OTHER

DAMAGE RESULTING THEREFROM. WHEN COPYING OR

TRANSFERRING YOUR DATA, PLEASE BE SURE TO CONFIRM

WHETHER THE DATA HAS BEEN SUCCESSFULLY COPIED OR

TRANSFERRED. TOSHIBA DISCLAIMS ANY LIABILITY FOR THE

FAILURE TO COPY OR TRANSFER THE DATA CORRECTLY.

5.375 x 8.375 ver 2.3

Critical Applications

The computer you have purchased is not designed for any “critical applications.”

“Critical applications” means life support systems, medical applications,

connections to implanted medical devices, commercial transportation, nuclear

facilities or systems or any other applications where product failure could lead to

injury to persons or loss of life or catastrophic property damage.

ACCORDINGLY, TOSHIBA, ITS AFFILIATES AND SUPPLIERS

DISCLAIM ANY AND ALL LIABILITY ARISING OUT OF THE USE

OF THE COMPUTER PRODUCTS IN ANY CRITICAL

APPLICATIONS. IF YOU USE THE COMPUTER PRODUCTS IN A

CRITICAL APPLICATION, YOU, AND NOT TOSHIBA, ASSUME

FULL RESPONSIBILITY FOR SUCH USE.

FCC Notice “Declaration of Conformity Information”

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation.

This equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, it may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

❖Reorient or relocate the receiving antenna.

❖Increase the separation between the equipment and receiver.

❖Connect the equipment to an outlet on a circuit different from that to which

the receiver is connected.

❖Consult the dealer or an experienced radio/TV technician for help.

Only Peripherals complying with the FCC Class B limits may be attached to

this equipment. Operation with noncompliant peripherals or peripherals not

recommended by Toshiba is likely to result in interference to radio and TV

reception. Shielded cables must be used between the external devices and

the computer's parallel port, monitor port, USB port, PS/2 port®, i.LINK®

port and microphone jack. Changes or modifications made to this equipment

not expressly approved by Toshiba or parties authorized by Toshiba could

void the user's authority to operate the equipment.

NOTE

5.375 x 8.375 ver 2.3

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

❖This device may not cause harmful interference.

❖This device must accept any interference received, including interference

that may cause undesired operation.

Contact either:

❖Toshiba’s Support Web site at pcsupport.toshiba.com.

❖Or call the Toshiba Global Support Centre:

Within the United States at (800) 457-7777

Outside the United States at (949) 859-4273

Industry Canada Requirement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conformé à la norme NMB-003 du

Canada.

FCC requirements

The following information is pursuant to FCC CFR 47, Part 68 and refers to

internal modems.

This equipment complies with Part 68 of the FCC rules. On the bottom of this

equipment is a label that contains, among other information, the FCC registration

number and ringer equivalence number (REN) for this equipment. If requested,

the information must be provided to the telephone company.

The modem connects to the telephone line by means of a standard jack called the

USOC RJ11C.

A plug and jack used to connect this equipment to the premises wiring and

telephone network must comply with the applicable FCC part 68 rules and

requirements adopted by the ACTA. It is designed to be connected to a

compatible modular jack that is also compliant.

The REN is used to determine the number of devices that may be connected to a

telephone line. Excessive RENs on a telephone line may result in the devices not

ringing in response to an incoming call. In most but not all areas, the sum of

RENs should not exceed five (5.0). To be certain of the number of devices that

may be connected to a line, as determined by the total RENs, contact the local

telephone company. For products approved after July 23, 2001, the REN for this

product is part of the product identifier that has the format

US:AAAEQ##TXXXX. The digits represented by the ## are the REN without a

5.375 x 8.375 ver 2.3

decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is

separately shown on the label.

Connection to party line service is subject to state tariffs. Contact the state public

utility commission, public service commission or corporation commission for

information.

Telephone Company Procedures

The goal of the telephone company is to provide you with the best service it can.

In order to do this, it may occasionally be necessary for them to make changes in

their equipment, operations or procedures. If these changes might affect your

service or the operation of your equipment, the telephone company will give you

notice, in writing, to allow you to make any changes necessary to maintain

uninterrupted service.

If Problems Arise

If this equipment causes harm to the telephone network, the telephone company

will notify you in advance that temporary discontinuance of service may be

required. But if advanced notice is not practical, the telephone company will

notify the customer as soon as possible. Also, you will be advised of your right to

file a complaint with the FCC if you believe it is necessary.

If trouble is experienced with this equipment, for repair or limited warranty

information, please contact Toshiba Corporation, Toshiba America Information

Systems, Inc. or an authorized representative of Toshiba, or the Toshiba Support

Centre within the United States at (800)457-7777or Outside the United States at

(949) 859-4273. If the equipment is causing harm to the telephone network, the

telephone company may request that you disconnect the equipment until the

problem is resolved.

Disconnection

If you should ever decide to permanently disconnect your modem from its

present line, please call the telephone company and let them know of this change.

Fax Branding

The Telephone Consumer Protection Act of 1991 makes it unlawful for any

person to use a computer or other electronic device, including Fax machines, to

send any message unless such message clearly contains in a margin at the top or

bottom of each transmitted page or on the first page of the transmission, the date

and time it is sent and an identification of the business or other entity, or other

individual sending the message and the telephone number of the sending

machine or such business, other entity, or individual. (The telephone number

5.375 x 8.375 ver 2.3

provided may not be a 900 number or any other number for which charges

exceed local or long-distance transmission charges.)

In order to program this information into your fax transmission, refer to the fax

software instructions installed on this computer.

Alarm Equipment

If your home has specially wired alarm equipment connected to the telephone

line, ensure the installation of this equipment does not disable your alarm

equipment. If you have questions about what will disable alarm equipment,

consult your telephone company or a qualified installer.

Instructions for IC CS-03 Certified Equipment

1NOTICE: The Industry Canada label identifies certified equipment.

This certification means that the equipment meets certain

telecommunications network protective, operational and safety

requirements as prescribed in the appropriate Terminal Equipment

Technical Requirements document(s). The Department does not

guarantee the equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it is permissible to

be connected to the facilities of the local telecommunications company. The

equipment must also be installed using an acceptable method of connection.

The customer should be aware that compliance with the above conditions

may not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representative

designated by the supplier. Any repairs or alterations made by the user to

this equipment, or equipment malfunctions, may give the

telecommunications company cause to request the user to disconnect the

equipment.

Users should ensure for their own protection that the electrical ground

connections of the power utility, telephone lines and internal metallic water

pipe system, if present, are connected together. This precaution may be

particularly important in rural areas.

Caution: Users should not attempt to make such connections themselves,

but should contact the appropriate electric inspection authority, or

electrician, as appropriate.

2The user manual of analog equipment must contain the equipment’s

Ringer Equivalence Number (REN) and an explanation notice similar

to the following:

The Ringer Equivalence Number (REN) of this device can be found on the

label affixed to your computer.

5.375 x 8.375 ver 2.3

NOTICE: The Ringer Equivalence Number (REN) assigned to each

terminal device provides an indication of the maximum number of

terminals allowed to be connected to a telephone interface. The termination

on an interface may consist of any combination of devices subject only to

the requirement that the sum of the Ringer Equivalence Numbers of all the

devices does not exceed 5.

3The standard connecting arrangement (telephone jack type) for this

equipment is jack type(s): USOC RJ11C.

Wireless Interoperability

The TOSHIBA Wireless LAN Mini PCI Card products are designed to be

interoperable with any wireless LAN product that is based on Direct Sequence

Spread Spectrum (DSSS) radio technology, and is compliant to:

❖The IEEE 802.11 Standardon Wireless LANs (Revision A/B/G), as defined

and approved by the Institute of Electrical and Electronics Engineers.

❖The Wireless Fidelity (Wi-Fi) certification as defined by the Wi-Fi Alliance.

The “Wi-Fi CERTIFIED” logo is a certification mark of the Wi-Fi Alliance.

Bluetooth®and Wireless LAN devices operate within the same radio

frequency range and may interfere with one another. If you use Bluetooth and

Wireless LAN devices simultaneously, you may occasionally experience a

less than optimal network performance or even lose your network

connection.

If you should experience any such problem, immediately turn off your

Bluetooth or Wireless LAN device.

Please contact Toshiba PC product support on Web site http://www.toshiba-

europe.com/computers/tnt/bluetooth.htm in Europe or

pcsupport.toshiba.com in the United States for more information.

Radio Frequency Interference Requirements

This device is restricted to indoor use due to its operation in the 5.15 GHz to

5.25 GHz frequency range. FCC requires this product to be used indoors for

frequency range 5.15 GHz to 5.25 GHz to reduce the potential for harmful

interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users of the 5.25 GHz to 5.35

GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause

interference with and/or damage this device.

5.375 x 8.375 ver 2.3

Wireless LAN and Your Health

Wireless LAN products, like other radio devices, emit radio frequency

electromagnetic energy. The level of energy emitted by Wireless LAN devices

however is far much less than the electromagnetic energy emitted by wireless

devices like for example mobile phones.

Because Wireless LAN products operate within the guidelines found in radio

frequency safety standards and recommendations, TOSHIBA believes Wireless

LAN is safe for use by consumers. These standards and recommendations reflect

the consensus of the scientific community and result from deliberations of panels

and committees of scientists who continually review and interpret the extensive

research literature.

In some situations or environments, the use of Wireless LAN may be restricted

by the proprietor of the building or responsible representatives of the

organization. These situations may for example include:

❖Using the Wireless LAN equipment on board airplanes, or

❖In any other environment where the risk of interference to other devices or

services is perceived or identified as harmful.

If you are uncertain of the policy that applies on the use of wireless devices in a

specific organization or environment (e.g. airports), you are encouraged to ask for

authorization to use the Wireless LAN device prior to turning on the equipment.

Exposure to Radio Frequency Radiation

The radiated output power of the TOSHIBA Wireless LAN Mini PCI Card is

far below the FCC radio frequency exposure limits. Nevertheless, the

TOSHIBA Wireless LAN Mini PCI Card shall be used in such a manner that

the potential for human contact during normal operation is minimized. In

normal operating configuration, the LCD in the upright position, the distance

between the antenna and the user should not be less than 20 cm. The

antenna(s) used for this transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter. Antenna(s) used in 5.15

GHz to 5.25 GHz frequency band must be integral antenna which provide no

access to the end user.

Refer to the Regulatory Statements as identified in the documentation that

comes with those products for additional information.

Regulatory Information

The TOSHIBA Wireless LAN Mini PCI Card must be installed and used in strict

accordance with the manufacturer’s instructions as described in the user

5.375 x 8.375 ver 2.3

documentation that comes with the product. This device complies with the

following radio frequency and safety standards.

Canada – Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.

The installer of this radio equipment must ensure that the antenna is located

or pointed such that it does not emit RF field in excess of Health Canada

limits for the general population; consult Safety Code 6, obtainable from

Health Canada’s Web site www.hc-sc.gc.ca/rpb. The RF device shall not be

co-located with any other transmitter that has not been tested with this

device.

Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of this device.

L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes: (1)

il ne doit pas produire de brouillage et (2) l’utilisateur du dispositif doit étre prêt à

accepter tout brouillage radioélectrique reçu, même si ce brouillage est

susceptible de compromettre le fonctionnement du dispositif.

The term “IC” before the equipment certification number only signifies that the

Industry Canada technical specifications were met.

To prevent radio interference to the licensed service, this device is intended to be

operated indoors and away from windows to provide maximum shielding.

Equipment (or its transmit antenna) that is installed outdoors is subject to

licensing.

Pour empecher que cet appareil cause du brouillage au service faisant l'objet

d'une licence, il doit etre utilize a l'interieur et devrait etre place loin des fenetres

afin de Fournier un ecram de blindage maximal. Si le matriel (ou son antenne

d'emission) est installe a l'exterieur, il doit faire l'objet d'une licence.

This device is restricted to indoor use due to its operation in the 5.15 GHz to

5.25 GHz frequency range. Industry Canada requires this product to be used

indoors for frequency range 5.15 GHz to 5.25 GHz to reduce the potential for

harmful interference to co-channel Mobile Satellite systems.

High power radars are allocated as primary users of the 5.25 GHz to 5.35

GHz and 5.65 GHz to 5.85 GHz bands. These radar stations can cause

interference with and/or damage this device.

5.375 x 8.375 ver 2.3

EU Declaration of Conformity

TOSHIBA declares, that the product: PLU10* conforms to the following

Standards:

This product is carrying the CE-Mark in accordance with the related European

Directives. Responsible for CE-Marking is TOSHIBA Europe, Hammfelddamm

8, 41460 Neuss, Germany.

VCCI Class B Information

Modem Warning Notice

Conformity Statement

The equipment has been approved to [Commission Decision “CTR-21”] for pan-

European single terminal connection to the Public Switched Telephone Network

(PSTN).

However, due to differences between the individual PSTNs provided in different

countries/regions the approval does not, of itself, give an unconditional assurance

of successful operation on every PSTN network termination point.

In the event of problems, you should contact your equipment supplier in the first

instance.

The above Caution information applies to products that operate with an

802.11a device.

Supplementary

Information: *The product complies with the

requirements of the Low Voltage Directive

72/23/EEC, the EMC Directive 89/336/

EEC and/or the R&TTE Directive 1999/

05/EEC.

NOTE

Andere Handbücher für A105-S4004 - Satellite - Core Duo 1.66 GHz

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba Laptop Handbücher

Toshiba

Toshiba A105-S4104 - Satellite - Core Duo 1.83 GHz Bedienungsanleitung

Toshiba

Toshiba Satellite 2430 Bedienungsanleitung

Toshiba

Toshiba L505D-SP6012L Betriebsanleitung

Toshiba

Toshiba M500-ST5405 Bedienungsanleitung

Toshiba

Toshiba Satellite Radius 15 P50W-C Bedienungsanleitung

Toshiba

Toshiba A215-S6804 - Satellite - Turion 64 X2 2 GHz Bedienungsanleitung

Toshiba

Toshiba Tecra 750CDM Bedienungsanleitung

Toshiba

Toshiba Satellite C50-A Series Bedienungsanleitung

Toshiba

Toshiba M400-EZ5031 - Portege - Core 2 Duo 1.83 GHz Bedienungsanleitung

Toshiba

Toshiba R15-S8222 Bedienungsanleitung

Toshiba

Toshiba ORACLER930 Benutzerhandbuch

Toshiba

Toshiba Satellite L550 series Bedienungsanleitung

Toshiba

Toshiba PPA60U-00L019 Bedienungsanleitung

Toshiba

Toshiba Satellite 310CDS Bedienungsanleitung

Toshiba

Toshiba A10-S127 - Satellite - Celeron 2 GHz Bedienungsanleitung

Toshiba

Toshiba Satellite P305-S8997E Bedienungsanleitung

Toshiba

Toshiba A105-S4334 - Satellite - Core 2 Duo 1.6 GHz Bedienungsanleitung

Toshiba

Toshiba M105-S3084 Bedienungsanleitung

Toshiba

Toshiba 5205-S5151 Bedienungsanleitung

Toshiba

Toshiba L655-S5154 Bedienungsanleitung

Toshiba

Toshiba 110CS - Satellite - Pentium 100 MHz Bedienungsanleitung

Toshiba

Toshiba Satellite L555-S7916 Firmware-Update

Toshiba

Toshiba Satellite A135-S2286 Betriebsanleitung

Toshiba

Toshiba Satellite CL10-C Series Bedienungsanleitung

Beliebte Laptop Handbücher anderer Marken

HP ze2401xt - Pavilion Notebook PC Bedienungsanleitung

Velocity

Velocity NoteMagix M10 Bedienungsanleitung

Dell

Dell Alienware 17 R2 Bedienungsanleitung

HP ENVY 17 Handbuch

Winbook

Winbook LM Bedienungsanleitung

Dell

Dell Inspiron 1464 Bedienungsanleitung

Dell

Dell Inspiron 15R 5537 Bedienungsanleitung

HP PROBOOK 4520S Handbuch

Dell

Dell Latitude ATG D620 Bedienungsanleitung

Dell

Dell Latitude 7310 Bedienungsanleitung

Dell

Dell Precision GU806 Bedienungsanleitung

Sony

Sony VAIO PCG-R505JLK Bedienungsanleitung

Lenovo

Lenovo THINKPAD X32 Bedienungsanleitung

HP Compaq tc4200 Kurzanleitung

Sony

Sony VGN-T240P VAIO Bedienungsanleitung

Compaq

Compaq Armada E700 Series Bedienungsanleitung

Fujitsu

Fujitsu Lifebook A6230 Bedienungsanleitung

Acer

Acer Aspire ONE 722 Bedienungsanleitung