Toshiba Satellite L300 Series Bedienungsanleitung

TOSHIBA

Satellite L300/

Satellite Pro L300/

Satellite L300D/

Satellite Pro L300D series

User’s Manual

User’s Manual i

laws, this manual cannot be reproduced in any form without the prior writ-

ten permission of TOSHIBA. No patent liability is assumed, with respect to

the use of the information contained herein.

TOSHIBA Satellite L300/Satellite Pro L300/Satellite L300D/Satellite Pro

L300D series Portable Personal Computer User’s Manual

First edition April 2008

other intellectual property covered by copyright laws belongs to the author

or to the copyright owner. Copyrighted material can be reproduced only for

personal use or use within the home. Any other use beyond that stipulated

above (including conversion to digital format, alteration, transfer of copied

material and distribution on a network) without the permission of the copy-

right owner is a violation of copyright or author’s rights and is subject to civil

damages or criminal action. Please comply with copyright laws in making

any reproduction from this manual.

Disclaimer

This manual has been validated and reviewed for accuracy. The

instructions and descriptions it contains are accurate for the TOSHIBA

Satellite L300/Satellite Pro L300/Satellite L300D/Satellite Pro L300D series

Portable Personal Computer at the time of this manual’s production.

However, succeeding computers and manuals are subject to change

without notice. TOSHIBA assumes no liability for damages incurred directly

or indirectly from errors, omissions or discrepancies between the computer

and the manual.

Trademarks

IBM is a registered trademark, and IBM PC and PS/2 are trademarks of

International Business Machines Corporation.

Intel, Intel SpeedStep and Intel Core and Centrino are trademarks or regis-

tered trademarks of Intel Corporation or its subsidiaries in the United States

and other countries/regions.

AMD, the AMD Arrow logo, AMD Athlon, AMD Turion, Radeon, and combi-

nations thereof, ATI Mobility Radeon are trademarks of Advanced Micro

Devices, Inc.

Windows and Microsoft are registered trademarks and Windows Vista is a

trademark of Microsoft Corporation.

Photo CD is a trademark of Eastman Kodak.

Memory Stick is a registered trademark of SonyCorporation.

DVD MovieFactory is a trademark of Ulead Systems Inc.

Labelflash™ is a trademark of YAMAHA CORPORATION.

User’s Manual ii

Manufactured under license from Digital Theater Systems, Inc. U.S. Pat.

No's. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535

and other U.S. and world-wide patents issued and pending. "DTS" and

"DTS Digital Surround" are registered trademarks of Digital Theater Sys-

Reserved.

Other trademarks and registered trademarks not listed above may be used

in this manual.

Macrovision License of Notice

For RTLA (Restricted Technology License Agreement)

This product incorporates copyright protection technology that is protected

by U.S. patents and foreign patents, including patent numbers 5,315,448

and 6,836,549, and other intellectual property rights. The use of

Macrovision's copy protection technology in the product must be authorized

by Macrovision. Reverse engineering or disassembly is prohibited. The

purchased.

Safety instructions

Use the following safety guidelines to help to protect yourself and your

computer.

When using your computer

■Do not attempt to service the computer yourself. Always follow

installation instructions closely.

■Do not carry a battery in your pocket, purse, or other container where

metal objects (such as car keys) could short-circuit the battery

terminals. The resulting excessive current follow can cause extremely

high temperatures and may result in damage from burns.

■Be sure that nothing rests on your AC adaptor’s power cable and that

the cable is not located where it can be tripped over or stepped on.

■Place the AC adaptor in a ventilated area, such as a desk top or on the

floor, when you use it to run the computer or to charge the battery. Do

not cover the AC adaptor with papers or other items that will reduce

cooling; also, do not use the AC adaptor while it is inside a carrying

case.

Do not operate your portable computer for an extended period of time with

the base resting directly on your body. With extended operation, heat can

potentially build up in the base. Allowing sustained contact with the skin

could cause discomfort or, eventually, a burn

User’s Manual iii

■Use only the AC adaptor and batteries that are approved for use with

this computer. Use of another type of battery or AC adaptor may risk fire

or explosion.

■Before you connect the computer to a power source, ensure that the

voltage rating of the AC adaptor matches that of the available power

source. 115 V/60 Hz in most of North and South America and some Far

Eastern countries such as Taiwan. 100 V/50 Hz in eastern Japan and

100 V/60 Hz in western Japan. 230 V/50 Hz in most of Europe, the

Middle East, and the Far East.

■If you use an extension cable with your AC adaptor, ensure that the total

ampere rating of the products plugged in to the extension cable does

not exceed the ampere rating of the extension cable.

■To remove power from the computer, turn it off, remove the battery, and

disconnect the AC adaptor from the electrical outlet.

■To help avoid the potential hazard of electric shock, do not connect or

disconnect any cables or perform maintenance or reconfiguration of this

product during an electrical storm.

■When setting up the computer for work, place it on a level surface.

FCC information

FCC notice “Declaration of Conformity Information”

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

■Reorient or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

■Consult the dealer or an experienced radio/TV technician for help.

User’s Manual iv

FCC conditions

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

Contact

Address: TOSHIBA America Information Systems, Inc.

9740 Irvine Boulevard

Irvine, California 92618-1697

Telephone: (949) 583-3000

EU Declaration of Comformity

Supplementary Information: The product complies with the requirements

Of the Low Voltage Directive 2006/95/EC,the EMC Directive 2004/108/EC

and/or the R&TTE Directive 1999/5/EC.”

This product is carrying the CE-Mark in accordance with the related

European Directives. Responsible for CE-Marking is TOSHIBA Europe,

Hammfelddamm 8, 41460 Neuss, Germany.

VCCI Class B information

Canadian regulatory information (Canada only)

This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus as set out in the Radio Interference

Regulation of the Canadian Department of Communications.

Only peripherals complying with the FCC class B limits may be attached to

this equipment. Operation with non-compliant peripherals or peripherals

not recommended by TOSHIBA is likely to result in interference to radio

and TV reception. Shielded cables must be used between the external

devices and the computer’s external monitor port, USB port, and

microphone jack. Changes or modifications made to this equipment, not

expressly approved by TOSHIBA or parties authorized by TOSHIBA could

void the user’s authority to operate the equipment.

User’s Manual v

Note that Canadian Department of Communications (DOC) regulations

provide, that changes or modifications not expressly approved by

TOSHIBA Corporation could void your authority to operate this equipment.

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causng Equipment Regulations.

Cet appareil numérique de la class B respecte toutes les exgences du

Règlement sur le matériel brouileur du Canada.

Modem warning notice

Conformity statement

The equipment has been approved to [Commission Decision “CTR21”] for

pan-European single terminal connection to the Public Switched Telephone

Network (PSTN).

However, due to differences between the individual PSTNs provided in

different countries/regions the approval does not, of itself, give an

unconditional assurance of successful operation on every PSTN network

termination point.

In the event of problems, you should contact your equipment supplier in the

first instance.

Network compatibility statement

This product is designed to work with, and is compatible with the following

networks. It has been tested to and found to conform with the additional

requirements conditional in EG 201 121.

Germany ATAAB AN005,AN006,AN007,AN009,AN010

and DE03,04,05,08,09,12,14,17

Greece ATAAB AN005,AN006 and GR01,02,03,04

Portugal ATAAB AN001,005,006,007,011 and

P03,04,08,10

Spain ATAAB AN005,007,012, and ES01

Switzerland ATAAB AN002

All other countries/regions ATAAB AN003,004

Specific switch settings or software setup is required for each network,

please refer to the relevant sections of the user guide for more details.

The hookflash (timed break register recall) function is subject to separate

national type approvals. It has not been tested for conformity to national

type regulations, and no guarantee of successful operation of that specific

function on specific national networks can be given.

User’s Manual vi

Japan regulations

Region selection

If you are using the computer in Japan, technical regulations described in

the Telecommunications Business Law require that you select the Japan

region mode. It is illegal to use the modem in Japan with any other

selection.

Redial

Up to two redial attempts can be made. If more than two redial attempts are

made, the modem will return Black Listed. If you are experiencing

problems with the Black Listed code, set the interval between redials at one

minute or longer.

Japan’s Telecommunications Business Law permits up to two redials on

analogue telephones, but the redials must be made within a total of three

minutes.

The internal modem is approved by Japan Approvals Institute for

Telecommunications Equipment.

Pursuant to FCC CFR 47, Part 68:

When you are ready to install or use the modem, call your local telephone

company and give them the following information:

■The telephone number of the line to which you will connect the modem

■The registration number that is located on the device.

US: AGSMD01BDELPHI

S56MD01B13054

CXSMM01BRD02D330

The FCC registration number of the modem will be found on either the

device which is to be installed, or, if already installed, on the bottom of

the computer outside of the main system label.

■The Ringer Equivalence Number (REN) of the modem, which can vary.

For the REN of your modem, refer to your modem’s label.

The modem connects to the telephone line by means of a standard jack

called the USOC RJ11C

A05-0413001

A05-0025001

A05-5016201

User’s Manual vii

Type of service

Your modem is designed to be used on standard-device telephone lines.

Connection to telephone company-provided coin service (central office

implemented systems) is prohibited. Connection to party lines service is

subject to state tariffs. If you have any questions about your telephone line,

such as how many pieces of equipment you can connect to it, the

telephone company will provide this information upon request.

Telephone company procedures

The goal of the telephone company is to provide you with the best service it

can. In order to do this, it may occasionally be necessary for them to make

changes in their equipment, operations, or procedures. If these changes

might affect your service or the operation of your equipment, the telephone

company will give you notice in writing to allow you to make any changes

necessary to maintain uninterrupted service.

If problems arise

If any of your telephone equipment is not operating properly, you should

immediately remove it from your telephone line, as it may cause harm to

the telephone network. If the telephone company notes a problem, they

may temporarily discontinue service. When practical, they will notify you in

advance of this disconnection. If advance notice is not feasible, you will be

notified as soon as possible. When you are notified, you will be given the

opportunity to correct the problem and informed of your right to file a

complaint with the FCC. In the event repairs are ever needed on your

modem, they should be performed by TOSHIBA Corporation or an

authorized representative of TOSHIBA Corporation.

Disconnection

If you should ever decide to permanently disconnect your modem from its

present line, please call the telephone company and let them know of this

change.

Fax branding

The Telephone Consumer Protection Act of 1991 makes it unlawful for any

person to use a computer or other electronic device to send any message

via a telephone fax machine unless such message clearly contains in a

margin at the top or bottom of each transmitted page or on the first page of

the transmission, the date and time it is sent and an identification of the

business, other entity or individual sending the message and the telephone

number of the sending machine or such business, other entity or individual.

In order to program this information into your fax modem, you should

complete the setup of your fax software before sending messages.

Use only NO. 26 AWG or larger telecommunication line cord.

User’s Manual viii

Instructions for IC CS-03 certified equipment

1The Industry Canada label identifies certified equipment. This certifica-

tion means that the equipment meets certain telecommunications net-

work protective, operational and safety requirements as prescribed in

the appropriate Terminal Equipment Technical Requirements docu-

ment(s). The Department does not guarantee the equipment will oper-

ate to the user’s satisfaction.

Before installing this equipment, users should ensure that it is permis-

sible to be connected to the facilities of the local telecommunications

company. The equipment must also be installed using an acceptable

method of connection.

The customer should be aware that compliance with the above condi-

tions may not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a representa-

tive designated by the supplier. Any repairs or alterations made by the

user to this equipment, or equipment malfunctions, may give the tele-

communications company cause to request the user to disconnect the

equipment.

Users should ensure for their own protection that the electrical ground

connections of the power utility, telephone lines and internal metallic

water pipe system, if present, are connected together. This precaution

may be particularly important in rural areas.

2The user manual of analog equipment must contain the equipment’s

Ringer Equivalence Number (REN) and an explanation notice similar

to the following:

The Ringer Equivalence Number (REN) of the modem, which can vary. For

the REN of your modem, refer to your modem’s label.

3The standard connecting arrangement (telephone jack type) for this

equipment is jack type(s): USOC RJ11C.

The IC registration number of the modem is shown below.

Canada: 4005B-DELPHI

109AH-ML3054

3652B-RD02D330

Users should not attempt to make such connections themselves, but

should contact the appropriate electric inspection authority, or electrician,

as appropriate.

The Ringer Equivalence Number (REN) assigned to each terminal device

provides an indication of the maximum number of terminals allowed to be

connected to a telephone interface. The termination on an interface may

consist of any combination of devices subject only to the requirement that

the sum of the Ringer Equivalence Numbers of all the devices does not

exceed 5.

User’s Manual ix

Notes for users in Australia and New Zealand

Modem warning notice for Australia

Modems connected to the Australian telecoms network must have a valid

Austel permit. This modem has been designed to specifically configure to

ensure compliance with Austel standards when the country/region selection

is set to Australia. The use of other country/region setting while the modem

is attached to the Australian PSTN would result in you modem being oper-

ated in a non-compliant manner. To verify that the country/region is cor-

rectly set, enter the command ATI which displays the currently active

setting.

To set the country/region permanently to Australia, enter the following com-

mand sequence:

AT%TE=1

ATS133=1

AT&F

AT&W

AT%TE=0

ATZ

Failure to set the modem to the Australia country/region setting as shown

above will result in the modem being operated in a non-compliant manner.

Consequently, there would be no permit in force for this equipment and the

Telecoms Act 1991 prescribes a penalty of $12,000 for the connection of

non-permitted equipment.

Notes for use of this device in New Zealand

■The grant of a Telepermit for a device in no way indicates Telecom

acceptance of responsibility for the correct operation of that device

under all operating conditions. In particular the higher speeds at which

this modem is capable of operating depend on a specific network

implementation which is only one of many ways of delivering high

quality voice telephony to customers. Failure to operate should not be

reported as a fault to Telecom.

■In addition to satisfactory line conditions a modem can only work

properly if:

(a) it is compatible with the modem at the other end of the call and

(b) the application using the modem is compatible with the applica-

tion at the other end of the call - e.g., accessing the Internet

requires suitable software in addition to a modem.

■This equipment shall not be used in any manner which could constitute

a nuisance to other Telecom customers.

■Some parameters required for compliance with Telecom’s PTC

Specifications are dependent on the equipment (PC) associated with

this modem. The associated equipment shall be set to operate within

the following limits for compliance with Telecom Specifications:

Andere Handbücher für Satellite L300 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba Laptop Handbücher

Toshiba

Toshiba Qosmio F15 Series Bedienungsanleitung

Toshiba

Toshiba R700-S1312 Bedienungsanleitung

Toshiba

Toshiba M115-S1071 Bedienungsanleitung

Toshiba

Toshiba M35X-S1492 Bedienungsanleitung

Toshiba

Toshiba X775-3DV80 Bedienungsanleitung

Toshiba

Toshiba Satellite Pro S300-EZ1511 Bedienungsanleitung

Toshiba

Toshiba Portege 7200CT Bedienungsanleitung

Toshiba

Toshiba Portege R835-P55 Bedienungsanleitung

Toshiba

Toshiba Satellite U305-S2812 Bedienungsanleitung

Toshiba

Toshiba Satellite L505-S5964 Bedienungsanleitung

Toshiba

Toshiba M645-S4062 Bedienungsanleitung

Toshiba

Toshiba Tecra 740CDT Bedienungsanleitung

Toshiba

Toshiba Satellite 5205 Series Bedienungsanleitung

Toshiba

Toshiba C655D-S5143 Bedienungsanleitung

Toshiba

Toshiba Satellite L450 series Bedienungsanleitung

Toshiba

Toshiba Qosmio G35-AV660 Series Bedienungsanleitung

Toshiba

Toshiba Satellite L505-S5984 Bedienungsanleitung

Toshiba

Toshiba L355-S7817 - Satellite - Pentium Dual Core 1.86... Bedienungsanleitung

Toshiba

Toshiba Tecra M10-S3401 Bedienungsanleitung

Toshiba

Toshiba P755-S5260 Bedienungsanleitung

Toshiba

Toshiba A505-S6980 Bedienungsanleitung

Toshiba

Toshiba X870-BT2G23 Bedienungsanleitung

Toshiba

Toshiba A85-S1071 Bedienungsanleitung

Toshiba

Toshiba P775-S7236 Bedienungsanleitung

Beliebte Laptop Handbücher anderer Marken

HP ze2401xt - Pavilion Notebook PC Bedienungsanleitung

Velocity

Velocity NoteMagix M10 Bedienungsanleitung

Dell

Dell Alienware 17 R2 Bedienungsanleitung

HP ENVY 17 Handbuch

Winbook

Winbook LM Bedienungsanleitung

Dell

Dell Inspiron 1464 Bedienungsanleitung

Dell

Dell Inspiron 15R 5537 Bedienungsanleitung

HP PROBOOK 4520S Handbuch

Dell

Dell Latitude ATG D620 Bedienungsanleitung

Dell

Dell Latitude 7310 Bedienungsanleitung

Dell

Dell Precision GU806 Bedienungsanleitung

Sony

Sony VAIO PCG-R505JLK Bedienungsanleitung

Lenovo

Lenovo THINKPAD X32 Bedienungsanleitung

HP Compaq tc4200 Kurzanleitung

Sony

Sony VGN-T240P VAIO Bedienungsanleitung

Compaq

Compaq Armada E700 Series Bedienungsanleitung

Fujitsu

Fujitsu Lifebook A6230 Bedienungsanleitung

Acer

Acer Aspire ONE 722 Bedienungsanleitung