Toshiba Satellite L450 series Bedienungsanleitung

Users Manual ii

laws, this manual cannot be reproduced in any form without the prior

written permission of TOSHIBA. No patent liability is assumed, with respect

to the use of the information contained herein.

TOSHIBA Satellite L450/Pro L450/L450D/Pro L450D series Portable

Personal Computer Users Manual

First edition August 2009

other intellectual property covered by copyright laws belongs to the author

or to the copyright owner. Copyrighted material can be reproduced only for

personal use or use within the home. Any other use beyond that stipulated

above (including conversion to digital format, alteration, transfer of copied

material and distribution on a network) without the permission of the

civil damages or criminal action. Please comply with copyright laws in

making any reproduction from this manual.

This manual has been validated and reviewed for accuracy. The

instructions and descriptions it contains are accurate for the TOSHIBA

Satellite L450/Pro L450/L450D/Pro L450D series Portable Personal

Computers at the time of this manuals production. However, succeeding

computers and manuals are subject to change without notice. TOSHIBA

assumes no liability for damages incurred directly or indirectly from errors,

omissions or discrepancies between the computer and the manual.

IBM is a registered trademark and IBM PC is a trademark of International

Business Machine Corporation.

Intel, Intel Core, Celeron, Centrino and Pentium are registered trademark

or trademarks of Intel Corporation.

Windows and Microsoft are registered trademarks of Microsoft Corporation.

DirectX, ActiveDesktop, DirectShow, and Windows Media are registered

trademarks of Microsoft Corporation.

Adobe and Photoshop are either registered trademarks ot trademarks of

Adobe system Incorporated in the United States.

ConfigFree is a trademark of TOSHIBA Corporation,

DVD MovieFactory is trademark of the Corel Corporations.

HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC.

LabelFlashTM is trademark of YAMAHA Corporation.

Photo CD is a trademark of Eastman Kodak.

Users Manual iii

Wi-Fi is a registered trademark of the Wi-Fi Alliance.

Memory Stick and Memory Stick PRO are registered trademarks of SONY

Corporation.

Secure Digital and SD are trademarks of SD Card Association.

MultiMediaCard and MMC are trademarks of MultiMediaCard Association.

Other trademarks and registered trademarks not listed above may be used

in this manual.

This product incorporates copyright protection technology that is protected

by U.S. patents and other intellectual property rights, including U.S. Patent

Numbers 6,836,549; 6,381,747; 7,050,698; 6,516,132 and 5,583,936. Use

of this copyright protection technology must be authorized by Macrovision,

and is intended for home and other viewing uses only unless otherwise

authorized by Macrovision. Reverse engineering or disassembly is

prohibited. The copyright protection technology availability depends on the

model you purchased.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Users Manual iv

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including

interference that may cause undesired operation.

Address: TOSHIBA America Information Systems, Inc.

9740 Irvine Boulevard

Irvine, California 92618-1697

Telephone: (949) 583-3000

Only peripherals complying with the FCC class B limits may be attached to

this equipment. Operation with non-compliant peripherals or peripherals

not recommended by TOSHIBA is likely to result in interference to radio

and TV reception. Shielded cables must be used between the external

devices and the computers external monitor port, Universal Serial Bus

(USB 2.0) ports, HDMI out port and microphone jack. Changes or

modifications made to this equipment, not expressly approved by

TOSHIBA or parties authorized by TOSHIBA could void the users

authority to operate the equipment.

This product and - if applicable - the supplied accessories too are marked

with "CE" and comply therefore with the applicable harmonized European

standards listed under the Low Voltage Directive 2006/95/EC, the EMC

Directive 2004/108/EC and/or R&TTE Directive 1999/5/EC.

Responsible for CE-marking:

TOSHIBA EUROPE GMBH, Hammfelddamm 8, 41460 Neuss, Germany

Manufacturer:

Toshiba Corporation, 1-1 Shibaura 1-chome, Minato-ku, Tokyo, 105-8001,

Japan

The complete official EU CE Declaration can be obtained on following

internet page: http://epps.toshiba-teg.com/

Users Manual v

The equipment has been approved to [Commission Decision CTR21] for

pan-European single terminal connection to the Public Switched Telephone

Network (PSTN).

However, due to differences between the individual PSTNs provided in

different countries/regions the approval does not, of itself, give an

unconditional assurance of successful operation on every PSTN network

termination point.

In the event of problems, you should contact your equipment supplier in the

first instance.

This product is designed to work with, and is compatible with the following

networks. It has been tested to and found to conform with the additional

requirements conditional in EG 201 121.

Specific switch settings or software setup is required for each network,

please refer to the relevant sections of the user guide for more details.

The hookflash (timed break register recall) function is subject to separate

national type approvals. It has not been tested for conformity to national

type regulations, and no guarantee of successful operation of that specific

function on specific national networks can be given.

Germany ATAAB AN005, AN006, AN007, AN009, AN010

and DE03, 04, 05, 08, 09, 12, 14, 17

Greece ATAAB AN005, AN006 and GR01, 02, 03, 04

Portugal ATAAB AN001, 005, 006, 007, 011 and

P03, 04, 08, 10

Spain ATAAB AN005, 007, 012, and ES01

Switzerland ATAAB AN002

All other countries/regions ATAAB AN003, 004

Users Manual vi

If you are using the computer in Japan, technical regulations described

under Telecommunications Business Law require that you select the Japan

region mode. It is illegal to use the modem in Japan with any other

selection.

Up to two redial attempts can be made. If more than two redial attempts are

made, the modem will return Black Listed. If you are experiencing

problems with the Black Listed code, set the interval between redials at one

minute or longer.

Japans Telecommunications Business Law permits up to two redials on

analogue telephones, but the redials must be made within a total of three

minutes.

The internal modem is approved by the Japan Approvals Institute for

Telecommunications Equipment.

When you are ready to install or use the modem, call your local telephone

company and give them the following information:

The telephone number of the line to which you will connect the modem

The registration number that is located on the device.

US: AGSMD01BDELPHI

S56MD01B13054

The FCC registration number of the modem will be found on either the

device which is to be installed, or, if already installed, on the bottom of the

computer outside of the main system label.

The Ringer Equivalence Number (REN) of the modem, which can vary -

for the REN, please refer to the modem's label.

The modem connects to the telephone line by means of a standard jack

called the USOC RJ11C.

Your modem is designed to be used on standard-device telephone lines.

Connection to telephone company-provided coin service (central office

implemented systems) is prohibited. Connection to party lines service is

subject to state tariffs. If you have any questions about your telephone line,

such as how many pieces of equipment you can connect to it, the

telephone company will provide this information upon request.

A05-0413001

A05-0025001

Users Manual vii

The goal of the telephone company is to provide you with the best service it

can. In order to do this, it may occasionally be necessary for them to make

changes in their equipment, operations, or procedures. If these changes

might affect your service or the operation of your equipment, the telephone

company will give you notice in writing to allow you to make any changes

necessary to maintain uninterrupted service.

If any of your telephone equipment is not operating properly, you should

immediately remove it from your telephone line, as it may cause harm to

the telephone network. If the telephone company notes a problem, they

may temporarily discontinue service. When practical, they will notify you in

advance of this disconnection. If advance notice is not feasible, you will be

notified as soon as possible. When you are notified, you will be given the

opportunity to correct the problem and informed of your right to file a

complaint with the FCC. In the event repairs are ever needed on your

modem, they should be performed by TOSHIBA Corporation or an

authorized representative of TOSHIBA Corporation.

If you should ever decide to permanently disconnect your modem from its

present line, please call the telephone company and let them know of this

change.

The Telephone Consumer Protection Act of 1991 makes it unlawful for any

person to use a computer or other electronic device to send any message

via a telephone fax machine unless such a message clearly contains in a

margin at the top or bottom of each transmitted page, or on the first page of

the transmission, the date and time it is sent, an identification of the

business, other entity or individual sending the message and the telephone

number of the sending machine or such business, other entity or individual.

In order to program this information into your fax modem, you should

complete the setup of your fax software before sending messages.

Use only No. 26 AWG or larger telecommunication line cord.

Users Manual viii

1. The Industry Canada label identifies certified equipment. This

certification means that the equipment meets certain

telecommunications network protective, operational and safety

requirements as prescribed in the appropriate Terminal Equipment

Technical Requirements document(s). The Department does not

guarantee the equipment will operate to the users satisfaction.

Before installing this equipment, users should ensure that it is

permissible to be connected to the facilities of the local

telecommunications company. The equipment must also be installed

using an acceptable method of connection.

The customer should be aware that compliance with the above

conditions may not prevent degradation of service in some situations.

Repairs to certified equipment should be coordinated by a

representative designated by the supplier. Any repairs or alterations

made by the user to this equipment, or equipment malfunctions, may

give the telecommunications company cause to request the user to

disconnect the equipment.

Users should ensure for their own protection that the electrical ground

connections of the power utility, telephone lines and internal metallic

water pipe system, if present, are connected together. This precaution

may be particularly important in rural areas.

2. The user manual of analog equipment must contain the equipments

Ringer Equivalence Number (REN) and an explanation notice similar to

the following:

The Ringer Equivalence Number (REN) of the modem can vary - for the

REN, please refer to the modem's label.

3. The standard connecting arrangement (telephone jack type) for this

equipment is jack type(s): USOC RJ11C.

The IC registration number of the modem is shown below.

Canada: 4005B-DELPHI

109AH-ML3054

Users should not attempt to make such connections themselves, but

should contact the appropriate electric inspection authority, or electrician,

as appropriate.

The Ringer Equivalence Number (REN) assigned to each terminal device

provides an indication of the maximum number of terminals allowed to be

connected to a telephone interface. The termination on an interface may

consist of any combination of devices subject only to the requirement that

the sum of the Ringer Equivalence Numbers of all the devices does not

exceed 5.

Users Manual ix

Modems connected to the Australian telecoms network must have a valid

Austel permit. This modem has been designed to specifically configure to

ensure compliance with Austel standards when the country/region selection

is set to Australia. The use of other country/region settings while the

modem is attached to the Australian PSTN would result in your modem

being operated in a non-compliant manner. To verify that the country/region

is correctly set, enter the command ATI which displays the currently active

setting.

To set the country/region permanently to Australia, enter the following

command sequence:

AT%TE=1

ATS133=1

AT&F

AT&W

AT%TE=0

ATZ

Failure to set the modem to the Australia country/region setting as shown

above will result in the modem being operated in a non-compliant manner.

Consequently, there would be no permit in force for this equipment, with the

Telecoms Act 1991 prescribing a penalty of $12,000 for the connection of

non-permitted equipment.

The grant of a Telepermit for a device in no way indicates Telecom

acceptance of responsibility for the correct operation of that device

under all operating conditions. In particular the higher speeds at which

this modem is capable of operating depend on a specific network

implementation which is only one of many ways of delivering high

quality voice telephony to customers. Failure to operate should not be

reported as a fault to Telecom.

In addition to satisfactory line conditions a modem can only work

properly if:

a/ It is compatible with the modem at the other end of the call, and;

b/ The application using the modem is compatible with the application

at the other end of the call - for example, accessing the Internet

requires suitable software in addition to a modem.

This equipment shall not be used in any manner which could constitute

a nuisance to other Telecom customers.

Users Manual x

Some parameters required for compliance with Telecoms PTC

Specifications are dependent on the equipment (PC) associated with

this modem. The associated equipment shall be set to operate within

the following limits for compliance with Telecom Specifications:

a/ There shall be no more than 10 call attempts to the same number

within any 30 minute period for any single manual call initiation, and;

b/ The equipment shall go on-hook for a period of not less than 30

seconds between the end of one attempt and the beginning of the

next, and;

c/ Automatic calls to different numbers shall be not less than 5

seconds apart.

Immediately disconnect this equipment should it become physically

damaged, and arrange for its disposal or repair.

The correct settings for use with this modem in New Zealand are as

follows:

ATB0 (CCITT operation)

AT&G2 (1800Hz guard tone)

AT&P1 (decadic dialing make-break ratio =33%/67%)

ATS0=0 (disable auto answer)

ATS6=4 (blind dial delay)

ATS7=Less than 90 (time to wait for carrier after dialing)

ATS10=Less than 150 (loss of carrier to hangup delay - the factory

default of 15 is recommended)

ATS11=90 (DTMF dialing on/off duration in milliseconds)

ATX2 (dial tone detect, but not USA call progress detect)

When used in Auto Answer mode, the S0 register must be set with to a

value of either 3 or 4. This ensures:

a person calling your modem will hear a short burst of ringing before

the modem answers. This confirms that the call has been

successfully switched through the network.

caller identification information (which occurs between the first and

second ring cadences) is not destroyed.

The preferred method of dialing is to use DTMF tones (ATDT...) as this

is faster and more reliable than pulse (decadic) dialing. If for some

reason you must use decadic dialing, your communications program

must be set up to record numbers using the following translation table

as this modem does not implement the New Zealand Reverse Dialing

standard.

Number to be dialed: 0 1 2 3 4 5 6 7 8 9

Number to program into computer: 0 9 8 7 6 5 4 3 2 1

Note that where DTMF dialing is used, the numbers should be

entered normally.

Andere Handbücher für Satellite L450 series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba Laptop Handbücher

Toshiba

Toshiba Satellite P850 Series Bedienungsanleitung

Toshiba

Toshiba T-Series T3200sxc Bedienungsanleitung

Toshiba

Toshiba L675D-S7022 Bedienungsanleitung

Toshiba

Toshiba TECRA M3-KK301E Bedienungsanleitung

Toshiba

Toshiba L675D-S7013 Bedienungsanleitung

Toshiba

Toshiba Satellite R800 Series Bedienungsanleitung

Toshiba

Toshiba Satellite 1800 SERIES Stücklistenhandbuch

Toshiba

Toshiba Satellite NB15T-A Bedienungsanleitung

Toshiba

Toshiba Satellite Pro C640-SP4019M Bedienungsanleitung

Toshiba

Toshiba Satellite Pro 410CDT Bedienungsanleitung

Toshiba

Toshiba Satellite 3000 Series Stücklistenhandbuch

Toshiba

Toshiba A205-S4639 - Satellite - Core 2 Duo 1.73 GHz Bedienungsanleitung

Toshiba

Toshiba Satellite C655 Bedienungsanleitung

Toshiba

Toshiba M505-S4985-T Bedienungsanleitung

Toshiba

Toshiba T-Series T1000SE Bedienungsanleitung

Toshiba

Toshiba C655D-S5226 Bedienungsanleitung

Toshiba

Toshiba P30-S701TD Bedienungsanleitung

Toshiba

Toshiba Satellite Pro C650-EZ1515D Bedienungsanleitung

Toshiba

Toshiba Satellite 100CS Bedienungsanleitung

Toshiba

Toshiba PSAAKC-VA104C Bedienungsanleitung

Toshiba

Toshiba Portege M780 Bedienungsanleitung

Toshiba

Toshiba PORTEGE R500 Series Bedienungsanleitung

Toshiba

Toshiba Satellite C650D Series Bedienungsanleitung

Toshiba

Toshiba P750-BT4G22 Bedienungsanleitung

Beliebte Laptop Handbücher anderer Marken

HP ze2401xt - Pavilion Notebook PC Bedienungsanleitung

Velocity

Velocity NoteMagix M10 Bedienungsanleitung

Dell

Dell Alienware 17 R2 Bedienungsanleitung

HP ENVY 17 Handbuch

Winbook

Winbook LM Bedienungsanleitung

Dell

Dell Inspiron 1464 Bedienungsanleitung

Dell

Dell Inspiron 15R 5537 Bedienungsanleitung

HP PROBOOK 4520S Handbuch

Dell

Dell Latitude ATG D620 Bedienungsanleitung

Dell

Dell Latitude 7310 Bedienungsanleitung

Dell

Dell Precision GU806 Bedienungsanleitung

Sony

Sony VAIO PCG-R505JLK Bedienungsanleitung

Lenovo

Lenovo THINKPAD X32 Bedienungsanleitung

HP Compaq tc4200 Kurzanleitung

Sony

Sony VGN-T240P VAIO Bedienungsanleitung

Compaq

Compaq Armada E700 Series Bedienungsanleitung

Fujitsu

Fujitsu Lifebook A6230 Bedienungsanleitung

Acer

Acer Aspire ONE 722 Bedienungsanleitung