Toshiba SATELLITE M40 Series Bedienungsanleitung

TOSHIBA Satellite M40

Portable Personal Computer

User’s Manual

laws, this manual cannot be reproduced in any form without the prior written

permission of TOSHIBA. No patent liability is assumed, with respect to the use

of the information contained herein.

TOSHIBA Satellite M40 Portable Personal Computer User’s Manual

First edition December 2004

intellectual property covered by copyright laws belongs to the author or to the

use within the home. Any other use beyond that stipulated above (including con-

version to digital format, alteration, transfer of copied material and distribution on

a network) without the permission of the copyright owner is a violation of copy-

right or author’s rights and is subject to civil damages or criminal action. Please

comply with copyright laws in making any reproduction from this manual.

Disclaimer

This manual has been validated and reviewed for accuracy. The instructions and

descriptions it contains are accurate for the TOSHIBA Satellite M40 Portable

Personal Computer at the time of this manual’s production. However, succeeding

computers and manuals are subject to change without notice. TOSHIBA assumes

no liability for damages incurred directly or indirectly from errors, omissions or

discrepancies between the computer and the manual.

Trademarks

IBM is a registered trademark, and IBM PC and PS/2 are trademarks of Interna-

tional Business Machines Corporation.

Intel, Intel SpeedStep and Pentium are trademarks or registered trademarks of Intel

Corporation or its subsidiaries in the United States and other countries/regions.

Windows and Microsoft are registered trademarks of Microsoft Corporation.

Photo CD is a trademark of Eastman Kodak.

Memory Stick is a registered trademark and i.LINK is a trademark of SonyCor-

poration.

Compact Flash is a trademark of SunDisk Corporation.

TruSurround XT, WOW XT, SRS and symbol are trademarks of SRS Labs,

Inc.

TruSurround XT, WOW XT, TruBass, SRS 3D and FOCUS technologies are

incorporated under license from SRS Labs, Inc.

iii

InterVideo and WinDVD are registered trademarks of the InterVideo Inc.

WinDVR and WinDVD Creator are trademarks of the InterVideo Inc.

Other trademarks and registered trademarks not listed above may be used in this

manual.

Macrovision License of Notice

This product incorporates copyright protection technology that is protected by

methods and claims of certain U.S. patents and other intellectual rights owned by

Macrovision Corporation, and other rights owners. Use of this copyright protec-

tion technology must be authorized by Macrovision Corporation and is intended

for home and other limited viewing uses only unless authorized by Macrovision

Corporation. Reverse engineering of disassembly is prohibited.

Safety Instructions

Use the following safety guidelines to help protect yourself and your computer.

When Using Your Computer

CAUTION: Do not operate your portable computer for an extended

period of time with the base resting directly on your body. With extended

operation, heat can potentially build up in the base. Allowing sustained

contact with the skin could cause discomfort or, eventually, a burn.

❑Do not attempt to service the computer yourself. Always follow installation

instructions closely.

❑Do not carry a battery in your pocket, purse, or other container where metal

objects (such as car keys) could short-circuit the battery terminals. The

resulting excessive current follow can cause extremely high temperatures

and may result in damage from burns.

❑Be sure that noting rests on your AC adapter’s power cable and that the

cable is not located where it can be tripped over or stepped on.

❑Place the AC adapter in a ventilated area, such as a desk top or on the floor,

when you use it to run the computer or to charge the battery. Do not cover

the AC adapter with papers or other items that will reduce cooling; also, do

not use the AC adapter while it is inside a carrying case.

❑Use only the AC adapter and batteries that are approved for use with this

computer. Use of another type of battery or AC adapter may risk fire or

explosion.

❑Before you connect the computer to a power source, ensure that the voltage

rating of the AC adapter matches that of the available power source. 115 V/

60 Hz in most of North and South America and some Far Eastern countries

such as Taiwan. 100 V/50 Hz in eastern Japan and 100 V/60 Hz in western

Japan. 230 V/50 Hz in most of Europe, the Middle East, and the Far East.

❑If you use an extension cable with your AC adapter, ensure that the total

ampere rating of the products plugged in to the extension cable does not

exceed the ampere rating of the extension cable.

❑To remove power from the computer, turn it off, remove the battery, and dis-

connect the AC adapter from the electrical outlet.

❑To help avoid the potential hazard of electric shock, do not connect or dis-

connect any cables or perform maintenance or reconfiguration of this prod-

uct during an electrical storm.

❑When setting up the computer for work, place it on a level surface.

FCC information

Product Name: Satellite M40

Model number: PSM40

FCC notice “Declaration of Conformity Informa-

tion”

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential instal-

lation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be deter-

mined by turning the equipment off and on, the user is encouraged to try to cor-

rect the interference by one or more of the following measures:

❑Reorient or relocate the receiving antenna.

❑Increase the separation between the equipment and receiver.

❑Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

❑Consult the dealer or an experienced radio/TV technician for help.

WARNING: Only peripherals complying with the FCC class B limits may

be attached to this equipment. Operation with non-compliant peripherals

or peripherals not recommended by TOSHIBA is likely to result in inter-

ference to radio and TV reception. Shielded cables must be used between

the external devices and the computer’s external monitor port, USB port,

serial port, parallel port, PS/2 mouse/keyboard port and microphone

jack. Changes or modifications made to this equipment, not expressly

approved by TOSHIBA or parties authorized by TOSHIBA could void the

user’s authority to operate the equipment.

FCC conditions

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference

that may cause undesired operation.

Contact

Address: TOSHIBA America Information Systems, Inc.

9740 Irvine Boulevard

Irvine, California 92618-1697

Telephone: (949) 583-3000

BSMI Notice (Taiwan Only)

EU Declaration of Conformity

TOSHIBA declares, that the product: Satellite M40 conforms to the following

Standards:

Supplementary Information: “The product complies with the requirements

of the Low Voltage Directive 73/23/EEC, the

EMC Directive 89/336/EEC and/or the

R&TTE Directive 1999/05/EEC.”

This product is carrying the CE-Mark in accordance with the related European

Directives. Responsible for CE-Marking is TOSHIBA Europe, Hammfelddamm

8, 41460 Neuss, Germany.

VCCI Class B Information

Canadian Regulatory Information

(Canada Only)

This digital apparatus does not exceed the Class B limits for radio noise emis-

sions from digital apparatus as set out in the Radio Interference Regulation of the

Canadian Department of Communications.

Note that Canadian Department of Communications (DOC) regulations provide,

that changes or modifications not expressly approved by TOSHIBA Corporation

could void your authority to operate this equipment.

vii

This Class B digital apparatus meets all requirements of the Canadian Interfer-

ence-Causng Equipment Regulations.

Cet appareil numérique de la class B respecte toutes les exgences du Règlement

sur le matériel brouileur du Canada.

Modem warning notice

Conformity Statement

The equipment has been approved to [Commission Decision “CTR21”] for pan-

European single terminal connection to the Public Switched Telephone Network

(PSTN).

However, due to differences between the individual PSTNs provided in different

countries/regions the approval does not, of itself, give an unconditional assur-

ance of successful operation on every PSTN network termination point.

In the event of problems, you should contact your equipment supplier in the first

instance.

Network Compatibility Statement

This product is designed to work with, and is compatible with the following net-

works. It has been tested to and found to conform with the additional require-

ments conditional in EG 201 121.

Germany ATAAB AN005,AN006,AN007,AN009,AN010 and

DE03,04,05,08,09,12,14,17

Greece ATAAB AN005,AN006 and GR01,02,03,04

Portugal ATAAB AN001,005,006,007,011 and P03,04,08,10

Spain ATAAB AN005,007,012, and ES01

Switzerland ATAAB AN002

All other countries/region ATAAB AN003,004

Specific switch settings or software setup are required for each network, please

refer to the relevant sections of the user guide for more details.

The hookflash (timed break register recall) function is subject to separate

national type approvals. It has not been tested for conformity to national type

regulations, and no guarantee of successful operation of that specific function on

specific national networks can be given.

viii

Japan regulations

Region selection

If you are using the computer in Japan, technical regulations described in the

Telecommunications Business Law require that you select the Japan region

mode. It is illegal to use the modem in Japan with any other selection.

Redial

Up to two redial attempts can be made. If more than two redial attempts are

made, the modem will return

Black Listed

. If you are experiencing problems

with the Black Listed code, set the interval between redials at one minute or

longer.

Japan’s Telecommunications Business Law permits up to two redials on ana-

logue telephones, but the redials must be made within a total of three minutes.

The internal modem is approved by Japan Approvals Institute for Telecommuni-

cations Equipment.

A02-0604JP

Pursuant to FCC CFR 47, Part 68:

When you are ready to install or use the modem, call your local telephone com-

pany and give them the following information:

❑The telephone number of the line to which you will connect the modem

❑The registration number that is located on the device

The FCC registration number of the modem will be found on either the

device which is to be installed, or, if already installed, on the bottom of the

computer outside of the main system label.

❑The Ringer Equivalence Number (REN) of the modem, which can vary. For

the REN of your modem, refer to your modem’s label.

The modem connects to the telephone line by means of a standard jack called the

USOC RJ11C.

Type of service

Your modem is designed to be used on standard-device telephone lines. Connec-

tion to telephone company-provided coin service (central office implemented

systems) is prohibited. Connection to party lines service is subject to state tariffs.

If you have any questions about your telephone line, such as how many pieces of

equipment you can connect to it, the telephone company will provide this infor-

mation upon request.

Telephone company procedures

The goal of the telephone company is to provide you with the best service it can.

In order to do this, it may occasionally be necessary for them to make changes in

their equipment, operations, or procedures. If these changes might affect your

service or the operation of your equipment, the telephone company will give you

notice in writing to allow you to make any changes necessary to maintain unin-

terrupted service.

If problems arise

If any of your telephone equipment is not operating properly, you should imme-

diately remove it from your telephone line, as it may cause harm to the telephone

network. If the telephone company notes a problem, they may temporarily dis-

continue service. When practical, they will notify you in advance of this discon-

nection. If advance notice is not feasible, you will be notified as soon as possible.

When you are notified, you will be given the opportunity to correct the problem

and informed of your right to file a complaint with the FCC. In the event repairs

are ever needed on your modem, they should be performed by TOSHIBA Corpo-

ration or an authorized representative of TOSHIBA Corporation.

Disconnection

If you should ever decide to permanently disconnect your modem from its

present line, please call the telephone company and let them know of this change.

Fax branding

The Telephone Consumer Protection Act of 1991 makes it unlawful for any per-

son to use a computer or other electronic device to send any message via a tele-

phone fax machine unless such message clearly contains in a margin at the top or

bottom of each transmitted page or on the first page of the transmission, the date

and time it is sent and an identification of the business, other entity or individual

sending the message and the telephone number of the sending machine or such

business, other entity or individual. In order to program this information into

your fax modem, you should complete the setup of your fax software before

sending messages.

Instructions for IC CS-03 certified equipment

1The Industry Canada label identifies certified equipment. This certification

means that the equipment meets certain telecommunications network protec-

tive, operational and safety requirements as prescribed in the appropriate

Terminal Equipment Technical Requirements document(s). The Department

does not guarantee the equipment will operate to the user’s satisfaction.

Before installing this equipment, users should ensure that it is permissible to

be connected to the facilities of the local telecommunications company. The

equipment must also be installed using an acceptable method of connection.

The customer should be aware that compliance with the above conditions

may not prevent degradation of service in some situations. Repairs to certi-

fied equipment should be coordinated by a representative designated by the

supplier. Any repairs or alterations made by the user to this equipment, or

equipment malfunctions, may give the telecommunications company cause

to request the user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground con-

nections of the power utility, telephone lines and internal metallic water pipe

system, if present, are connected together. This precaution may be particu-

larly important in rural areas.

CAUTION: Users should not attempt to make such connections them-

selves, but should contact the appropriate electric inspection authority, or

electrician, as appropriate.

2The user manual of analog equipment must contain the equipment’s Ringer

Equivalence Number (REN) and an explanation notice similar to the follow-

ing:

The Ringer Equivalence Number (REN) of the modem, which can vary. For

the REN of your modem, refer to your modem’s label.

NOTICE: The Ringer Equivalence Number (REN) assigned to each ter-

minal device provides an indication of the maximum number of terminals

allowed to be connected to a telephone interface. The termination on an

interface may consist of any combination of devices subject only to the

requirement that the sum of the Ringer Equivalence Numbers of all the

devices does not exceed 5.

3The standard connecting arrangement (telephone jack type) for this equip-

ment is jack type(s): USOC RJ11C.

The IC registration number of the modem is shown below.

Canada: 1353 11026A

Andere Handbücher für SATELLITE M40 Series

Inhaltsverzeichnis

Andere Toshiba Laptop Handbücher

Toshiba

Toshiba Tecra A6-EZ6411 Montageanleitung

Toshiba

Toshiba A665-S6100X Bedienungsanleitung

Toshiba

Toshiba A215-S7407 - Satellite - Athlon 64 X2 1.8... Bedienungsanleitung

Toshiba

Toshiba A215-S7462 - Satellite - Turion 64 X2 2 GHz Bedienungsanleitung

Toshiba

Toshiba A665-S6056 Bedienungsanleitung

Toshiba

Toshiba L305-SP6986R Bedienungsanleitung

Toshiba

Toshiba L300-EZ1004X - Satellite Pro - Core 2 Duo... Bedienungsanleitung

Toshiba

Toshiba Satellite P505-S8010 Bedienungsanleitung

Toshiba

Toshiba L305-S5933 - Satellite - Pentium Dual Core 2.16... Bedienungsanleitung

Toshiba

Toshiba Satellite P500 Bedienungsanleitung

Toshiba

Toshiba T-Series T4850CT Bedienungsanleitung

Toshiba

Toshiba Satellite Pro A120-106 Bedienungsanleitung

Toshiba

Toshiba L305D-S5897 Benutzerhandbuch

Toshiba

Toshiba Satellite L700 Series Bedienungsanleitung

Toshiba

Toshiba R835-P81 Bedienungsanleitung

Toshiba

Toshiba U405-ST550W Bedienungsanleitung

Toshiba

Toshiba Satellite L505-S5984 Bedienungsanleitung

Toshiba

Toshiba A205-S5813 - Satellite - Pentium 1.6 GHz Bedienungsanleitung

Toshiba

Toshiba PLL3AC-02P014 Bedienungsanleitung

Toshiba

Toshiba A100-ST1041 Bedienungsanleitung

Toshiba

Toshiba Satellite C670 Bedienungsanleitung

Toshiba

Toshiba A105-S4334 - Satellite - Core 2 Duo 1.6 GHz Bedienungsanleitung

Toshiba

Toshiba Satellite A60 Bedienungsanleitung

Toshiba

Toshiba Satellite C655 Bedienungsanleitung

Beliebte Laptop Handbücher anderer Marken

HP ze2401xt - Pavilion Notebook PC Bedienungsanleitung

Velocity

Velocity NoteMagix M10 Bedienungsanleitung

Dell

Dell Alienware 17 R2 Bedienungsanleitung

HP ENVY 17 Handbuch

Winbook

Winbook LM Bedienungsanleitung

Dell

Dell Inspiron 1464 Bedienungsanleitung

Dell

Dell Inspiron 15R 5537 Bedienungsanleitung

HP PROBOOK 4520S Handbuch

Dell

Dell Latitude ATG D620 Bedienungsanleitung

Dell

Dell Latitude 7310 Bedienungsanleitung

Dell

Dell Precision GU806 Bedienungsanleitung

Sony

Sony VAIO PCG-R505JLK Bedienungsanleitung

Lenovo

Lenovo THINKPAD X32 Bedienungsanleitung

HP Compaq tc4200 Kurzanleitung

Sony

Sony VGN-T240P VAIO Bedienungsanleitung

Compaq

Compaq Armada E700 Series Bedienungsanleitung

Fujitsu

Fujitsu Lifebook A6230 Bedienungsanleitung

Acer

Acer Aspire ONE 722 Bedienungsanleitung