Toshiba 32W301Ps Bedienungsanleitung

(*1) GREEN PRODUCT PROCUREMENT

The EC is actively promoting the WEEE & RoHS Directives that define standards for recycling

and reuse of Waste Electrical and Electronic Equipment and for the Restriction of the use of

certain Hazardous Substances. From July 1, 2006, the RoHS Directive will prohibit any

marketing of new products containing the restricted substances.

Increasing attention is given to issues related to the global environmental. Toshiba Corporation

recognizes environmental protection as a key management tasks, and is doing its utmost to

enhance and improve the quality and scope of its environmental activities. In line with this,

Toshiba proactively promotes Green Procurement, and seeks to purchase and use products,

parts and materials that have low environmental impacts.

Green procurement of parts is not only confined to manufacture. The same green parts used in

manufacture must also be used as replacement parts.

(*2) LEAD-FREE SOLDER

This product is manufactured using lead-free solder as a part of a movement within the consumer

products industry at large to be environmentally responsible. Lead-free solder must be used in

the servicing and repair of this product.

WARNING

This product is manufactured using lead free solder.

DO NOT USE LEAD BASED SOLDER TO REPAIR THIS PRODUCT !

The melting temperature of lead-free solder is higher than that of leaded solder by 86°F to 104°F

(30°C to 40°C). Use of a soldering iron designed for lead-based solders to repair product made

with lead-free solder may result in damage to the component and or PCB being soldered. Great

care should be made to ensure high-quality soldering when servicing this product especially

when soldering large components, through-hole pins, and on PCBs as the level of heat

required to melt lead-free solder is high.

A1-1

SERVICING NOTICES ON CHECKING

1. KEEP THE NOTICES

As for the places which need special attentions,

they are indicated with the labels or seals on the

cabinet, chassis and parts. Make sure to keep the

indications and notices in the operation manual.

3. USE THE DESIGNATED PARTS

5. TAKE CARE TO DEAL WITH THE

CATHODE-RAY TUBE

Please include the following informations when you order parts. (Particularly the VERSION LETTER.)

1. MODEL NUMBER and VERSION LETTER

The MODEL NUMBER can be found on the back of each product and the VERSION LETTER can be

found at the end of the SERIAL NUMBER.

2. PART NO. and DESCRIPTION

You can find it in your SERVICE MANUAL.

HOW TO ORDER PARTS

When you exchange IC and Transistor with a heat sink, apply silicon grease on the contact section of

the heat sink. Befor applying new silicon grease, remove all the old silicon grease.

(Old grease may cause damages to the IC and Transistor.)

IMPORTANT

2. AVOID AN ELECTRIC SHOCK

There is a high voltage part inside. Avoid an

electric shock while the electric current is

flowing.

The parts in this equipment have the specific

characters of incombustibility and withstand

voltage for safety. Therefore, the part which is

replaced should be used the part which has

the same character.

Especially as to the important parts for safety

which is indicated in the circuit diagram or the

table of parts as a mark, the designated

parts must be used.

4. PUT PARTS AND WIRES IN THE

ORIGINAL POSITION AFTER

ASSEMBLING OR WIRING

There are parts which use the insulation

material such as a tube or tape for safety, or

which are assembled in the condition that

these do not contact with the printed board.

The inside wiring is designed not to get closer

to the pyrogenic parts and high voltage parts.

Therefore, put these parts in the original

positions.

In the condition that an explosion-proof cathode-

ray tube is set in this equipment, safety is

secured against implosion. However, when

removing it or serving from backward, it is

dangerous to give a shock. Take enough care to

deal with it.

PERFORM A SAFETY CHECK AFTER

SERVICING

Confirm that the screws, parts and wiring which

were removed in order to service are put in the

original positions, or whether there are the

portions which are deteriorated around the

serviced places serviced or not. Check the

insulation between the antenna terminal or

external metal and the AC cord plug blades.

And be sure the safety of that.

(INSULATION CHECK PROCEDURE)

Unplug the plug from the AC outlet.

Remove the antenna terminal on TV and turn

on the TV.

Insulation resistance between the cord plug

terminals and the eternal exposure metal

[Note 2] should be more than 1M ohm by

using the 500V insulation resistance meter

[Note 1].

If the insulation resistance is less than 1M

ohm, the inspection repair should be

required.

[Note 1]

If you have not the 500V insulation

resistance meter, use a Tester.

[Note 2]

External exposure metal:

A1-2

Antenna terminal

Headphone jack

TABLE OF CONTENTS

GREEN PRODUCT PROCUREMENT ........................................................................................

LEAD-FREE SOLDER ................................................................................................................

SERVICING NOTICES ON CHECKING.....................................................................................

HOW TO ORDER PARTS ..........................................................................................................

IMPORTANT ...............................................................................................................................

TABLE OF CONTENTS..............................................................................................................

GENERAL SPECIFICATIONS ...................................................................................................

DISASSEMBLY INSTRUCTIONS ............................................................................................

SERVICE MODE LIST ................................................................................................................

WHEN REPLACING EEPROM (MEMORY) IC ..........................................................................

ELECTRICAL ADJUSTMENTS..................................................................................................

BLOCK DIAGRAMS

MAIN ........................................................................................................................................

POWER ...................................................................................................................................

PRINTED CIRCUIT BOARDS

MAIN ........................................................................................................................................

POWER/OPERATION/REMOCON .........................................................................................

SCHEMATIC DIAGRAMS

21 PIN ......................................................................................................................................

POWER 3 ................................................................................................................................

REGULATOR...........................................................................................................................

AV JACK/SWITCH...................................................................................................................

SOUND AMP/HEADPHONE AMP ..........................................................................................

TUNER.....................................................................................................................................

SCALER...................................................................................................................................

SUB MICON/RS-232C ............................................................................................................

JACK ........................................................................................................................................

PANEL INTERFACE................................................................................................................

INTERFACE_HDMI IC ............................................................................................................

POWER 1 ................................................................................................................................

POWER 2 ................................................................................................................................

OPERATION/REMOCON ........................................................................................................

INTERCONNECTION..................................................................................................................

WAVEFORMS .............................................................................................................................

MECHANICAL EXPLODED VIEWS...........................................................................................

MECHANICAL REPLACEMENT PARTS LIST .........................................................................

ELECTRICAL REPLACEMENT PARTS LIST...........................................................................

A1-1

A1-2

A2-1

A3-1~A3-5

B-1, B-2

C-1

C-2

D-1~D-7

E-1, E-2

E-3, E-4

F-1~F-4

F-5~F-8

G-1, G-2

G-3, G-4

G-5, G-6

G-7, G-8

G-9, G-10

G-11, G-12

G-13, G-14

G-15, G-16

G-17, G-18

G-19, G-20

G-21, G-22

G-23, G-24

G-25, G-26

G-27, G-28

G-29, G-30

H-1, H-2

I-1~I-3

J1-1, J1-2

J2-1~J2-17

A2-1

GENERAL SPECIFICATIONS

G-1 TV LCD LCD Size / Visual Size 31.51 inch / 800.4mmV

System LCD Type Color TFT LCD

Number of Pixels 1366(H) x 768(V)

View Range Left/Right 89/89 degree

Up/Down 89/89 degree

Color System PAL / SECAM

Speaker 2 Speaker

Position Front

Size 2.2 x 5.0 inch

Impedance 4 ohm

Sound Output MAX 10W + 10W

10%(Typical) ---

NTSC3.58+4.43 /PAL60Hz Yes

G-2 Tuning Broadcasting System

System Tuner and System 1Tuner

Receive CH Destination UK, I.R., CCIR Hyper+France CATV

CH Coverage IreE2~E4, X~Z+2, S1~S10, E5~E12,S11~S41,E21~E69

Intermediate

Frequency Picture(FP) 38.9 / 38.9 / 38.9 / 33.9MHz

Sound(FS) 33.4 / 32.9 / 32.4 / 40.4MHz

FP-FS 5.5 / 6.0 / 6.5 / 6.5MHz

Auto Tuning Method ALL Band (Not C.C.I.R. CH Plan)

Preset CH 99

Stereo/Dual TV Sound Nicam/A2 Dual

Tuner Sound Muting Yes

G-3 Power Power Source AC 220-240V AC 50Hz/60Hz

DC ---

Power Consumption at AC 150 W at AC 230 V 50 Hz

at DC --

Stand by (at AC) 1 W at 230V 50Hz

Per Year -- kWh/Year

Protector Power Fuse Yes

G-4 Regulation Safety CE(EN60065:2002)

Radiation CE

X-Radiation ---

G-5 Temperature Operation +

~ +4

Storage -2

~ +

G-6 Operating Humidity Less than 80% RH

G-7 OSD Language English, Spanish, German, French, Italian,

Swedish, Dutch, Russian, Portuguese,

Turkish, Greek, Finnish, Polish

G-8 Clock and Sleep Timer Max Time 120 Min

Timer Step 10 Min

On/Off Timer Program(On Timer / Off Timer) -- Program

Wake Up Timer No

Timer Back-up (at Power Off Mode) more than -- Min Sec

U.K., I.R., CCIR, FRENCH System

B/G, D/K, I/I, L

BG / II / DK, L / L' (SECAM VL)

A3-1

GENERAL SPECIFICATIONS

G-9 Remote Unit RC-NZ

Control Glow in Dark Remocon Yes

Remocon Format TOSHIBA

Format NEC

Custom Code 40-BF h

Power Source Voltage(D.C) 3V

UM size x pcs UM-3 x 2 pcs

Total Keys 33 Keys

Keys Power (Stand By) Yes

Display / (Status) Yes

Input Select Yes

Picture Size Yes

1 Yes

2 Yes

3 Yes

4 Yes

5 Yes

6 Yes

7 Yes

8 Yes

9 Yes

0 Yes

Sleep Yes

Mute Yes

Volume Up / Right Yes

Volume Down / Left Yes

CH Down No

CH Up No

Menu Yes

Up No

Down No

Left No

Right No

Enter Yes

Exit Yes

Freeze frame No

T'TEXT Keys TEXT / TAP / TV Yes

Reveal / Skip No

Reveal Yes

Display Cancel No

HOLD / Freeze Yes

Red Yes

Green Yes

Yellow Yes

Cyan Yes

Normal No

F/T/B(Expand) Yes

F/T/B(Expand) / Normal No

Quick View No

Sub Page / Quick View Yes

Up/CH Up No

Up / CH Up / Page Up Yes

Down / CH Down No

Down / CH Down / Page Down Yes

Reset No

Audio 1/2 Yes

Reset / Audio 1/2 No

A3-2

GENERAL SPECIFICATIONS

G-10 Features Power On Memory Yes

Auto Shut Off Yes

Just Clock Function No

Game Position No

DNR Yes

Comb Filter Yes

Auto Set Up (Fast installation) Auto tuning (Analog tuner) Yes

CH sort Yes

ATS Yes

Auto clock (Analog tuner) No

Plug in start Yes

Picture Setting(TV) Picture Preference Yes

Brightness , Contrast , Color Yes

Tint Yes

Sharpness Yes

DNR Yes

Color Temperature Yes

Blue Back Yes

Backlight Control Yes

Film Mode No

Picture Setting(PC) BRIGHTNESS , CONTRAST Yes

HOR POSITION , VER POSITION Yes

PHASE , CLOCK Yes

AUTO ADJUST No

RED , GREEN , BLUE Yes

Backlight Yes

WXGA INPUT Yes

WVGA INPUT No

Audio Nicam Yes

Tone Control (Bass/Treble/Balance) Yes

Surround Yes

BBE No

SRS WOW (SRS 3D/Focus/Tru Bass) No

Variable Audio Out Yes

Tuning Auto Tuning Yes

Manual Tuning Yes

CH Allocation Yes

Lock (Analog) Panel Lock No

Channel Lock No

Hotel Lock No

Screen Saver Inversion No

Full White No

Screen Saver No

Static Image No

Black Side Panel No

CH Label Yes

T'Text Yes

Text type Fastext / Toptext

Text Language English , French, Swedish, Hungarian

Turkish, German, Portuguese, Spanish,

Italian, Greek, Slovakian, Russian, Polish,

Czech, Rumanian, Estonian, Lettish,

Lithuanian, Ukrainian, Croatian, Slovenian,

Latvian

Wide Mode (AUTO/4:3/FULL SCREEN/16:9/CINEMA/14:9) Yes

HD Zoom No

Picture Scroll (Vertical Position) Yes

PFC(Power Factor circuit) Yes

Freeze frame Yes (w/o720p, 1080i)

HD-Ready Yes

Plug and Play No

Reset TV Setting Yes

Scart Spec Scart1 AV in Yes

AV out Yes (Tuner)

S-Video in Yes

RGB in Yes

Scart2 AV in Yes

AV out Yes (Monitor)

S-Video in Yes

RGB in Yes

A3-3

GENERAL SPECIFICATIONS

PC Monitor Input Yes

VGA (640x480) Yes (60Hz)

VGA (720x400) Yes (70Hz)

WVGA (848x480) No

SVGA (800x600) Yes (60Hz)

XGA (1024x768) Yes (60Hz)

WXGA (1280x768) Yes (60Hz)

WXGA (1280x720) Yes (60Hz)

WXGA (1360x768) Yes (60Hz)

SXGA (1280x1024) No

HDMI Input Yes (Ver. 1.2)

VGA (640x480) Yes (60Hz)

720x480i (4:3) Yes (60Hz)

720x480i (16:9) Yes (60Hz)

720x480p (4:3) Yes (60Hz)

720x480p (16:9) Yes (60Hz)

720x576i (4:3) Yes (50Hz)

720x576i (16:9) Yes (50Hz)

720x576p (4:3) Yes (50Hz)

720x576p (16:9) Yes (50Hz)

1280x720p Yes (50/60Hz)

1920x1080i Yes (50/60Hz)

Component Input Yes

720x480i (4:3) Yes (60Hz)

720x480i (16:9) Yes (60Hz)

720x480p (4:3) Yes (60Hz)

720x480p (16:9) Yes (60Hz)

720x576i (4:3) Yes (50Hz)

720x576i (16:9) Yes (50Hz)

720x576p (4:3) Yes (50Hz)

720x576p (16:9) Yes (50Hz)

1280x720p Yes (50/60Hz)

1920x1080i Yes (50/60Hz)

G-11 Accessories Owner's Manual Language English/French/Italy/Spanish/German/

Polish/Turkish/Greek/Dutch

w/Guarantee Card No

Remote Control Unit Yes

Rod Antenna No

Poles -

Terminal -

Loop Antenna (W/ Antenna Change Plug) No

Terminal -

U/V Mixer No

DC Car Cord (Center+) No

Guarantee Card No

Warning Sheet No

Circuit Diagram No

Antenna Change Plug No

Service Facility List No

Important Safeguard No

Quick Set-up Sheet No

Battery Yes

UM size x pcs UM-3 x 2 pcs

OEM Brand No

AC Adapter No

AC Cord (for AC Adapter) No

AC Cord Yes

AV Cord (2Pin-1Pin) No

HDMI-DVI Cable No

Registration Card No

300 ohm to 75 ohm Antenna Adapter No

A3-4

GENERAL SPECIFICATIONS

G-12 Interface Switch Power (Tact) Yes

System Select No

Main Power SW No

Channel Up/Menu Up Yes

Channel Down/Menu Down Yes

Volume Up/Menu > Yes

Volume Down/Menu < Yes

Input Select/Enter Yes

Menu Yes

Indicator Power/Stand-by Yes(GREEN / RED)

On Timer No

Terminals Side Video Input 1 RCA x 1

Audio Input 1 RCA x 2(L/MONO, R)

S- Input 1 Yes

Video Input 2 No

Audio Input 2 No

S- Input 2 No

Video Output No

Audio Output RCA x 2(Variable) (L, R)

Other Terminal No

Euro Scart (21Pin) 2Scart

Component In Yes

Audio Input (Component In use) RCA x 2(L/MONO, R)

PC Monitor Input (D-Sub) Yes

Audio Input Mini Pin Jack

(

o3.5

STEREO

HDMI Input 1 Yes

Audio Input (HDMI/DVI In use) PC Monitor Audio Input Alternative

HDMI Input 2 Yes

Audio Input (HDMI/DVI In use) Mini Pin Jack

(

o3.5

STEREO

Sub Woofer Output No

Diversity No

Ext Speaker No

DC Jack 12V(Center +) No

VHF/UHF Antenna Input DIN Type

AC Inlet Yes

Other Terminal Headphone

G-13 Set Size Approx. W x D x H (mm) 822 x 332.5 x 604

w/o Stand,Handle Approx. W x D x H (mm) 822 x 129 x 556.5

G-14 Weight Net Approx. 18.5kg (40.8 lbs)

Net w/o Stand,Handle Approx. 16.0kg (35.3 lbs)

Gross Approx. 22.5kg (49.6 lbs)

G-15 Carton Master Carton 3

Content ---- Sets

Material -- /--

Dimensions W x D x H(mm) -- x -- x --

Description of Origin No

Gift Box Yes

Material Double/Brown

Dimensions W x D x H(mm) 917 x 441 x 720

Design As per Buyer's

Description of Origin Yes

Drop Test Natural Dropping At 2 Corner / 2 Edges / 1 Surfaces

Height (cm) 50

Container Stuffing 201 Sets/40' container

G-16 Material Cabinet Cabinet Front PS 94V0 NON-DECABROM

Cabinet Rear PS 94V0 NON-DECABROM

PCB Non-Halogen No

Eyelet Yes

G-17 Environment Environmental standard requirement Green procurement of TOSHIBA

Pb- Free Phase3(PHASE3A)

Measures for Whisker Yes

WEEE Yes

A3-5

B-1

Masking Tape

(Cotton Tape)

DISASSEMBLY INSTRUCTIONS

REMOVAL

Put Masking Tape (cotton tape) around the Flat Pack-

age IC to protect other parts from any damage.

(Refer to Fig. 1-1.)

Fig. 1-1

NOTE

REMOVAL AND INSTALLATION OF

FLAT PACKAGE IC

Some ICs on the PCB are affixed with glue, so be

careful not to break or damage the foil of each IC

leads or solder lands under the IC when removing it.

NOTE

Masking is carried out on all the parts located within

10 mm distance from IC leads.

Blower type IC

desoldering machine

Heat the IC leads using a blower type IC desoldering

machine. (Refer to Fig. 1-2.)

Fig. 1-2

NOTE

Do not rotate or move the IC back and forth until IC

can move back and forth easily after desoldering the

leads completely.

When IC starts moving back and forth easily after

desoldering completely, pickup the corner of the IC using

a tweezers and remove the IC by moving with the IC

desoldering machine. (Refer to Fig. 1-3.)

Blower type IC

desoldering

machine

IC Fig. 1-3

Tweezers

Peel off the Masking Tape.4.

Absorb the solder left on the pattern using the Braided

Shield Wire. (Refer to Fig. 1-4.)

NOTE

Do not move the Braided Shield Wire in the vertical

direction towards the IC pattern.

Braided Shield Wire

Soldering Iron

Fig. 1-4

IC pattern

B-2

DISASSEMBLY INSTRUCTIONS

Supply soldering

from upper position

to lower position

Supply the solder from the upper position of IC leads

sliding to the lower position of the IC leads.

(Refer to Fig. 1-6.)

Fig. 1-6

Soldering IronSolder

Absorb the solder left on the lead using the Braided

Shield Wire. (Refer to Fig. 1-7.)

Fig. 1-7

Soldering Iron

Braided Shield Wire

NOTE

Do not absorb the solder to excess.

When bridge-soldering between terminals and/or the

soldering amount are not enough, resolder using a Thin-

tip Soldering Iron. (Refer to Fig. 1-8.)

Fig. 1-8

Thin-tip Soldering Iron

NOTE

When the IC leads are bent during soldering and/or

repairing, do not repair the bending of leads. If the

bending of leads are repaired, the pattern may be

damaged. So, be always sure to replace the IC in this

case.

Finally, confirm the soldering status on four sides of the

IC using a magnifying glass.

Confirm that no abnormality is found on the soldering

position and installation position of the parts around the

IC. If some abnormality is found, correct by resoldering.

Solder temporarily

Soldering Iron

INSTALLATION

Take care of the polarity of new IC and then install the

new IC fitting on the printed circuit pattern. Then solder

each lead on the diagonal positions of IC temporarily.

(Refer to Fig. 1-5.)

Fig. 1-5

Solder temporarily

Inhaltsverzeichnis

Andere Toshiba LCD-Fernseher Handbücher

Toshiba

Toshiba Regza 42WLG66 Bedienungsanleitung

Toshiba

Toshiba 32WLT58 Series Bedienungsanleitung

Toshiba

Toshiba 26AV502U - 26" LCD TV Bedienungsanleitung

Toshiba

Toshiba 23HLV87 - 23" LCD TV Bedienungsanleitung

Toshiba

Toshiba 32AV500U - 32" LCD TV Bedienungsanleitung

Toshiba

Toshiba Regza 42HL167 Bedienungsanleitung

Toshiba

Toshiba 32W1333B Bedienungsanleitung

Toshiba

Toshiba 37AV50U Bedienungsanleitung

Toshiba

Toshiba W43 Digital Series Bedienungsanleitung

Toshiba

Toshiba REGZA 32RV530U Bedienungsanleitung

Toshiba

Toshiba 24PB1E Bedienungsanleitung

Toshiba

Toshiba REGZA 37HL66 Bedienungsanleitung

Toshiba

Toshiba Regza 52XF550U Bedienungsanleitung

Toshiba

Toshiba 42HL167 - 42" LCD TV Bedienungsanleitung

Toshiba

Toshiba WL66/67 Bedienungsanleitung

Toshiba

Toshiba 32 WL2C Series Bedienungsanleitung

Toshiba

Toshiba 42LX177 - 42" LCD TV Bedienungsanleitung

Toshiba

Toshiba 37XV500A Bedienungsanleitung

Toshiba

Toshiba 32W1333DB Bedienungsanleitung

Toshiba

Toshiba REGZA 46RV535U Bedienungsanleitung

Toshiba

Toshiba 32C110U Bedienungsanleitung

Toshiba

Toshiba 32AV607PG Bedienungsanleitung

Toshiba

Toshiba 37WL68P Bedienungsanleitung

Toshiba

Toshiba 32W134*DG Einrichtungshandbuch

Beliebte LCD-Fernseher Handbücher anderer Marken

LG 32LC4R* Bedienungsanleitung

Samsung

Samsung LA32E420 Leitfaden

Dell

Dell W1900 19 Gebrauchsanweisung

Samsung

Samsung LN40C670M1F Bedienungsanleitung

Runco

Runco CX-52HD Bedienungsanleitung

Sharp

Sharp LC-32AX3H Bedienungsanleitung

Philips

Philips 47PFL7704D Bedienungsanleitung

Vizio

Vizio VO42LFHDTV10A Bedienungsanleitung

Philips

Philips 42PF7520D/79 Bedienungsanleitung

Insignia

Insignia NS-LCD32-09 Bedienungsanleitung

Sony

Sony WEGA KLV-27HR3 Bedienungsanleitung

Nexus

Nexus NX32031 Bedienungsanleitung

Zenith

Zenith Z32LC2D Bedienungsanleitung

Sony

Sony KDL-32S3000R - 32" Class Bravia S-series Digital Lcd... Bedienungsanleitung

Medion

Medion MEDION LIFE X14330 Bedienungsanleitung

Vizio

Vizio HDTV30A VW32L Bedienungsanleitung

Sharp

Sharp LC-24DV250K Bedienungsanleitung

SOYO

SOYO Dymond DYLT032A Bedienungsanleitung