Toshiba 50L3400U Bedienungsanleitung

SERVICE MANUAL

LCD Color Television

50L3400U/UM/UCseries

CONTENTS

1. IMPORTANT NOTICE

2. GREEN PRODUCT PROCUREMENT

3. LEAD-FREE SOLDER

4. SAFETY INSTRUCTION

5. FIRMWARE UPDATING

6. INTERCONNECT

7. EXPLODED VIEW

8. FACTORY MODE

IMPORTANT NOTICE

WARNING:

You are requested that you shall not modify or alter the information or data provided

herein without prior written consent by Toshiba. Toshiba shall not be liable to

anybody for any damages, losses, expenses or costs, if any, incurred in connection

with or as a result of such modification or alteration.

THE INFORMATION OR DATA HEREIN SHALL BE PROVIDED "AS IS" WITHOUT ANY

WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED WARRANTY OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Toshiba shall not be liable for any damages, losses, expenses or costs, if any,

incurred in connection with or as a result of use of any information or data provided

herein.

GREEN PRODUCT PROCUREMENT

The EC is actively promoting the WEEE & RoHS Directives that define standards for

recycling and reuse of Waste Electrical and Electronic Equipment and for the Restriction of

the use of certain Hazardous Substances. From July 1, 2006, the RoHS Directive will

prohibit any marketing of new products containing the restricted substances.

Increasing attention is given to issues related to the global environmental. Toshiba

Corporation recognizes environmental protection as a key management tasks, and is doing

its utmost to enhance and improve the quality and scope of its environmental activities. In

line with this, Toshiba proactively promotes Green Procurement, and seeks to purchase

and use products, parts and materials that have low environmental impacts.

Green procurement of parts is not only confined to manufacture. The same green parts

used in manufacture must also be used as replacement parts.

LEAD-FREE SOLDER

This product is manufactured using lead-free solder as a part of a movement within the

consumer products industry at large to be environmentally responsible. Lead-free solder

must be used in the servicing and repair of this product.

WARNING: This product is manufactured using lead free solder.

DO NOT USE LEAD BASED SOLDER TO REPAIR THIS PRODUCT!

The melting temperature of lead-free solder is higher than that of leaded solder by 54ºF to

72ºF (30ºC to 40ºC). Use of a soldering iron designed for lead-based solders to repair

product made with lead-free solder may result in damage to the component and or PCB

being soldered. Great care should be made to ensure high-quality soldering when servicing

this product especially when soldering large components, through-hole pins, and on PCBs

as the level of heat required to melt lead-free solder is high.

(1/3)

SAFETY INSTRUCTION

WARNING: BEFORE SERVICING THIS CHASSIS, READ THE "SAFETY

PRECAUTION" AND "PRODUCT SAFETY NOTICE" INSTRUCTIONS BELOW.

Safety Precaution

WARNING: SERVICING SHOULD NOT BE ATTEMPTED BY ANYONE UNFAMILIAR

WITH THE NECESSARY PRECAUTIONS ON THIS RECEIVER. THE FOLLOWING ARE

THE NECESSARY PRECAUTIONS TO BE OBSERVED BEFORE SERVICING THIS

CHASSIS.

1. An isolation transformer should be connected in the power line between the receiver

and the AC line before any service is performed on the receiver.

2. Always disconnect the power plug before any disassembling of the product. It may

result in electrical shock.

3. When replacing a chassis in the cabinet, always be certain that all the protective

devices are put back in place, such as nonmetallic control knobs, insulating covers,

shields, isolation resistor-capacitor network, etc.

4. Always keep tools, components of the product, etc away from the children, These

items may cause injury to children.

5. Depending on the model, use an isolation transformer or wear suitable gloves when

servicing with the power on, and disconnect the power plug to avoid electrical shock

when replacing parts. In some cases, alternating current is also impressed in the

chassis, so electrical shock is possible if the chassis is contacted with the power on.

6. Always use the replacement parts specified for the particular model when making

repairs. The parts used in products require special safety characteristics such as

inflammability, voltage resistance, etc. therefore, use only replacement parts that

have these same characteristics. Use only the specified parts when the mark is

indicated in the circuit diagram or parts list.

7. Parts mounting and routing dressing of wirings should be the same as that used

originally. For safety purposes, insulating materials such as isolation tube or tape are

sometimes used and printed circuit boards are sometimes mounted floating. Also

make sure that wirings is routed and clamped to avoid parts that generate heat and

(2/3)

which use high voltage. Always follow the manufactured wiring routes / dressings.

8. Always ensure that all internal wirings are in accordance before re-assembling the

external casing after a repairing completed. Do not allow internal wiring to be

pinched by cabinets, panels, etc. Any error in reassembly or wiring can result in

electrical leakage, flame, etc., and may be hazardous.

9. NEVER remodel the product in any way. Remodeling can result in improper

operation, malfunction, or electrical leakage and flame, which may be hazardous.

10. Always perform an AC leakage current checking on the exposed metallic parts of the

cabinet such as antennas, terminals, screw heads, metal overlays, control shafts

and etc. to be sure that the set is safe to operate without any dangerous of electrical

shocks before returning the set to the customer.

11. The leakage current checking. (After completing the work, measure the leakage

current to prevent an electrical shock.)

 Plug the AC line cord directly into a 120V AC outlet. Do not use an isolation

transformer for this check.

 Use an AC voltmeter having 5000 ohms per volt or more sensitivity in the following

manner.

Connect a 1500 ohm 10 watt resistor, paralleled by a 0.15 µF, AC type capacitor, between

a known good earth ground (water pipe, conduit, etc.) and the exposed metallic parts, one

at a time. Measure the AC voltage across the combination of 1500 ohm resistor and 0.15

µF capacitor. Reverse the AC plug at the AC outlet and repeat AC voltage measurements

for each exposed metallic part. Voltage measured must not exceed 0.3 volts rms. This

corresponds to 0.2 milliamp. AC. Any value exceeding this limit constitutes a potential

shock hazard and must be corrected immediately.

(3/3)

Product Safety Notice

Many electrical and mechanical parts in this chassis have special safety-related

characteristics. These characteristics are often passed unnoticed by a visual inspection and

the protection afforded by them cannot necessarily be obtained by using replacement

components rated for higher voltage, wattage, etc. Replacement parts which have these

special safety characteristics are identified in this manual and its supplements; electrical

components having such features are identified by the international hazard symbols on the

schematic diagram and the parts list.

Before replacing any of these components, read the parts list in this manual carefully. The

use of substitute replacement parts which do not have the same safety characteristics as

specified in the parts list may create electrical shock, fire, or other hazards.

FIRMWARE INSTALLATION NOTICE

TOSHIBA LED TV MODELS **L3400U/UM & **L3460U/UM Model Series

The installation process is simple; however, please read all of the following instructions and notices prior to installation. This firmware

update is intended solely for use with the TOSHIBA Models indicated above.

Notice (Read Prior to Beginning the Firmware Upgrade)

The following events may interrupt the upgrade process and result in an inoperative unit.

1) Only unplug the AC Power Cord when instructed during the firmware upgrade procedure.

2) Avoid loss or interruption of power during the firmware upgrade procedure.

3) DO NOT Press the power button on the unit, unless instructed by the firmware upgrade procedure.

If you are experiencing problems or have further questions:

Customers should contact Toshiba Customer Service at 800-631-3811.

Toshiba Authorized Service Providers should contact Toshiba Technical Support Group.

Prior to using this installation procedure, the correct firmware must be provided on a USB drive by Toshiba or

downloaded to a USB drive from an Authorized Toshiba website. Do not alter the file or folder structures.

Download Procedure

1) Use a USB Mass Storage Device (USB Flash Drive) that has been formatted to “FAT32”.

2) Copy the following (2) files to the root directory of the USB Mass Storage Device

•L3400.meta

•L3400_8.2.xx.xx.xx.1.fwu (“8.2.xx.xx.xx.1” is the FW Version)

Update Procedure

NOTE: Some personal settings and preferences may need adjusted upon completion of this upgrade. Please

note any personal settings or preferences prior to proceeding to the firmware upgrade.

1) Power the TV “On”and wait for the TOSHIBA logo to appear as shown in Figure 1. Wait until the picture is

displayed on the screen.

Figure 1

2) Insert the USB Flash Drive into the USB Port 1 of the TV. This port is located on the side of the TV receiver as

shown in Figure 2.

Figure 2

3) After the following message appears, select “Yes” with Left/Right key, and push “OK” key to start FW upgrade.

Shown in Figure 3 below. NOTE: This message may not appear if the TV was using a network function at

the time the USB Flash Drive was connected. In this case, please select the ANT/CABLE input and then

remove and reconnect the USB Flash Drive.

Figure 3

4) Next, the following message appears to enable users to select their preferred behavior after the SW upgrade is

complete. If you want the TV to reboot automatically after FW upgrade, select “Yes”. If you want the TV to go to

standby after the SW update, select “No”. Shown in Figure 4 below.

Figure 4

5) Next, the following message will be displayed as shown in Figure 5.

WARNING: Do not unplug the TV.

Figure 5

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Toshiba LCD-Fernseher Handbücher

Toshiba

Toshiba 52LX177 - 52" LCD TV Bedienungsanleitung

Toshiba

Toshiba 19LV610U - 18.5" LCD TV Bedienungsanleitung

Toshiba

Toshiba TheaterWide 20HL85 Bedienungsanleitung

Toshiba

Toshiba 26AV52U Bedienungsanleitung

Toshiba

Toshiba 48L544 DG Series Einrichtungshandbuch

Toshiba

Toshiba 32HLX84 Bedienungsanleitung

Toshiba

Toshiba 37WL67Z Bedienungsanleitung

Toshiba

Toshiba 19SL400U Bedienungsanleitung

Toshiba

Toshiba Regza 42LX196 Bedienungsanleitung

Toshiba

Toshiba REGZA 26HL47 Bedienungsanleitung

Toshiba

Toshiba Regza 40XF550U Bedienungsanleitung

Toshiba

Toshiba 32RV525RZ Bedienungsanleitung

Toshiba

Toshiba REGZA 26HL67 Bedienungsanleitung

Toshiba

Toshiba 32WL58P Bedienungsanleitung

Toshiba

Toshiba 37XV555D Bedienungsanleitung

Toshiba

Toshiba 32HLX84 Service-Handbuch

Toshiba

Toshiba WL56 Series Bedienungsanleitung

Toshiba

Toshiba 20VL43P Bedienungsanleitung

Toshiba

Toshiba 26EL833G Bedienungsanleitung

Toshiba

Toshiba C/X3000P Series Gebrauchs- und Wartungshandbuch

Toshiba

Toshiba 48L344 DG Einrichtungshandbuch

Toshiba

Toshiba 37HLC56 - 37" LCD Flat Panel Display Bedienungsanleitung

Toshiba

Toshiba 37AV52U - 37" LCD TV Bedienungsanleitung

Toshiba

Toshiba 32AV800AZ Bedienungsanleitung

Beliebte LCD-Fernseher Handbücher anderer Marken

LG 32LC4R* Bedienungsanleitung

Samsung

Samsung LA32E420 Leitfaden

Dell

Dell W1900 19 Gebrauchsanweisung

Samsung

Samsung LN40C670M1F Bedienungsanleitung

Runco

Runco CX-52HD Bedienungsanleitung

Sharp

Sharp LC-32AX3H Bedienungsanleitung

Philips

Philips 47PFL7704D Bedienungsanleitung

Vizio

Vizio VO42LFHDTV10A Bedienungsanleitung

Philips

Philips 42PF7520D/79 Bedienungsanleitung

Insignia

Insignia NS-LCD32-09 Bedienungsanleitung

Sony

Sony WEGA KLV-27HR3 Bedienungsanleitung

Nexus

Nexus NX32031 Bedienungsanleitung

Zenith

Zenith Z32LC2D Bedienungsanleitung

Sony

Sony KDL-32S3000R - 32" Class Bravia S-series Digital Lcd... Bedienungsanleitung

Medion

Medion MEDION LIFE X14330 Bedienungsanleitung

Vizio

Vizio HDTV30A VW32L Bedienungsanleitung

Sharp

Sharp LC-24DV250K Bedienungsanleitung

SOYO

SOYO Dymond DYLT032A Bedienungsanleitung