Toshiba TDP-MT200 Bedienungsanleitung

Others Maintenance Operations Preparations Before Using

English Français Español Deutsch Italiano

Português

Svenska

OWNER’S MANUAL

DLP™ PROJECTOR

TDP-MT200

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended

to alert the user to the presence of uninsulated "dangerous voltage" within the product's

enclosure that may be of sufficient magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the

literature accompanying the appliance.

FCC NOTICE: This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES

ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET.

REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

WARNING: Handling the cord on this product or cords associated with accessories sold with

this product, will expose you to lead, a chemical known to the State of California

to cause birth defects or other reproductive harm.

Wash hands after handling

WARNING: This [product] contains mercury. Disposal of mercury may be regulated due to

environmental considerations. For disposal or recycling information, please

contact your local authorities or the Electronic Industries Alliance: www.eiae.org.

USA only

MODEL NAME: TDP-MT200

TRADE NAME: DLP™ PROJECTOR MODEL NAME: TDP-MT200

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

USA only

SAFETY PRECAUTIONS

Before Using

USA only

Before Using

English Français Español Deutsch Italiano

Português

Svenska

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

- Consult the dealer or an experienced radio/TV technician for help.

RESPONSIBLE PARTY: Toshiba America Consumer Products LLC

82 Totowa Road, Wayne, New Jersey, 07470

Phone: (973)628-8000

WARNING: Changes or modifications made to this equipment, not expressly approved by

Toshiba, or parties authorized by Toshiba, could void the user’s authority to

operate the equipment.

Notice: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil

numérique de la classe B est conforme à la norme NMB-003 du Canada.

CANADA only

USA only

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND

INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE

MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE

REFERENCE.

This set has been designed and manufactured to assure personal safety. Improper use can

result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you

if you observe the following procedures for installation, use and servicing. This unit is fully

transistorized and does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO

DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL ONLY.

1. Read Owner's Manual

After unpacking this product, read

the owner's manual carefully, and

follow all the operating and other

instructions.

2. Power Sources

This product should be operated

only from the type of power source

indicated on the marking label.

If you are not sure of the type of

power supply to your home,

consult your product dealer or

local power company.

For products intended to operate

from battery power, or other

sources, refer to the operating

instructions.

3. Source of Light

Do not look into the lens while the

lamp is on. The strong light from

the lamp may cause damage to

your eyes or sight.

4. Ventilation

Openings in the cabinet are

provided for ventilation and to

ensure reliable operation of the

product and to protect it from

overheating, and these openings

must not be blocked or covered.

The openings should never be

blocked by placing the product on

a bed, sofa, rug or other similar

surface. This product should not

be placed in a built-in installation

such as a bookcase or rack unless

proper ventilation is provided or

the manufacturer's instructions

have been adhered to.

Before Using

English Français Español Deutsch Italiano

Português

Svenska

5. Heat

The product should be situated

away from heat sources such as

radiators, heat registers, stoves, or

other products (including

amplifiers) that produce heat.

6. Water and Moisture

Do not use this product near water.

- for example, near a bath tub,

wash bowl, kitchen sink, or laundry

tub; in a wet basement; or near a

swimming pool and the like.

7. Cleaning

Unplug this product from the wall

outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners.

Use a soft cloth for cleaning.

8. Power-Cord Protection

Power-supply cords should be

routed so that they are not likely to

be walked on or pinched by items

placed upon or against them,

paying particular attention to cords

at plugs, convenience receptacles,

and the point where they exit from

the product.

9. Overloading

Do not overload wall outlets;

extension cords, or integral

convenience receptacles as this

can result in a risk of fire or

electric shock.

IMPORTANT SAFETY INSTRUCTIONS (Continued)

10. Lightning storms

For added protection for this

product during storm, or when it is

left unattended and unused for

long periods of time, unplug it from

the wall outlet. This will prevent

damage to the product due to

lightning and power-line surges.

However, while it is thundering or

lightning, do not touch the

apparatus and any connected

cable and/or equipment.

This will prevent you from

receiving the electric shock by an

electric surge.

11. Object and Liquid Entry

Never push objects of any kind

into this product through openings

as they may touch dangerous

voltage points or short-out parts

that could result in a fire or electric

shock. Never spill liquid of any

kind on the product.

12. Do not place the product

vertically

Do not use the product in the

upright position to project the

pictures at the ceiling, or any other

vertical positions. It may fall down

and dangerous.

13. Stack Inhibited

Do not stack other equipment on

this product or do not place this

product on the other equipment.

Top and bottom plates of this

product develops heat and may

give some undesirable damage to

other unit.

14. Attachments

Do not use attachments not

recommended by the product

manufacturer as they may cause

hazards.

Before Using

English Français Español Deutsch Italiano

Português

Svenska

15. Accessories

Do not place this product on an

unstable cart, stand, tripod,

bracket, or table. The product may

fall, causing serious injury to a

child or adult, and serious damage

to the product. A product and cart

combination should be moved with

care. Quick stops, excessive

force, and uneven surfaces may

cause the product and cart

combination to overturn.

S3125A

16. Damage Requiring Service

Unplug this product from the wall

outlet and refer servicing to

qualified service personnel under

the following conditions:

a) When the power-supply cord or

plug is damaged.

b) If liquid has been spilled, or

objects have fallen into the

product.

c) If the product has been exposed to

rain or water.

d) If the product does not operate

normally by following the operating

instructions. Adjust only those

controls that are covered by the

operating instructions as an

improper adjustment of other

controls may result in damage and

will often require extensive work by

a qualified technician to restore

the product to its normal

operation.

e) If the product has been dropped or

damaged in any way.

f) When the product exhibits a

distinct change in performance -

this indicates a need for service.

17. If glass components,

including lens and lamp,

should break, contact your

dealer for repair service.

This product incorporates glass

components, including a lens and

a lamp. If such parts should

break, please handle with care to

avoid injury and contact your

dealer for repair service. The

broken pieces of glass may cause

to injury. In the unlikely event of

the lamp rupturing, thoroughly

clean the area around the

projector and discard any edible

items placed in that area.

18. Servicing

Do not attempt to service this

product yourself as opening or

removing covers may expose you

to dangerous voltage or other

hazards. Refer all servicing to

qualified service personnel.

19. Replacement Parts

When replacement parts are

required, be sure the service

technician has used replacement

parts specified by the

manufacturer or have the same

characteristics as the original part.

Unauthorized substitutions may

result in fire, electric shock, or

other hazards.

(Replacement of the lamp only

should be made by users.)

20. Safety Check

Upon completion of any service or

repairs to this product, ask the

service technician to perform

safety checks to determine that

the product is in proper operating

condition.

21. Do not leave thermal-paper

documents or easily

deformed items on top of

the unit or near the air

exhaust for long periods of

time.

The heat from the unit could erase

the information on the thermal

paper, or cause deformation or

warping.

IMPORTANT SAFETY INSTRUCTIONS (Continued)

22. Do not use the product in

a closed installation state.

Do not place the product in a box

or in any other closed installation

state. Otherwise it may overheat.

This could result in a risk of fire.

Before Using

English Français Español Deutsch Italiano

Português

Svenska

If your line voltage is 220 to 240V, use one of the following types of cable.

Plug

configuration Plug type

Australian

240V

10A

North American

240V

15A

Switzerland

240V

Line voltage

EURO

220 – 240V

200 – 240V

Plug

configuration Plug type Line voltage

Use a 5A fuse which is approved by ASTA

or BSI to BSI362.

Always replace the fuse cover after

changing the fuse.

IMPORTANT PRECAUTIONS

Save Original Packing Materials

The original shipping carton and packing materials will come in handy if you ever have to

ship your projector. For maximum protection, repack the set as it was originally packed at

the factory.

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm location.

When the unit is exposed to such a change in temperature, moisture may condense on

the crucial internal parts. To prevent the unit from possible damage, do not use the unit for

at least 2 hours when there is an extreme or sudden change in temperature

Place and Manner of Installation

•Do not place in hot locations, such as near heating equipment. Doing so could cause

malfunction, and shorten the life of the projector.

•Avoid locations with oil or cigarette smoke. Doing so will dirty the optical parts,

shortening their lives, and darkening the screen.

•Do not use the product vertically in any upright position or slantwise in an angle of 20

degrees or more.

•Using this instrument near a TV or radio may cause interference to the images or audio

sound. If this happens, move it away from the TV or radio.

•Moving the projector from a low-temperature room to a high-temperature room may

cause condensation on the lens or internal parts in the instrument. If you continue to use

it in that situation, the malfunction may result. Ensure to wait until the condensation

naturally disappears.

•In a high altitude location where air is thin, cooling efficiency is reduced so use it with the

ambient temperature being lowered.

POWER SUPPLY CORD SELECTION

IMPORTANT PRECAUTIONS (Continued)

Avoid Volatile Liquid

Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or

plastic products touching the unit for a long time. They will leave marks on the finish.

If cleaning with a chemically saturated cloth, be sure to follow the product's precautions.

In the spaces provided below, record the Model and Serial No. located at the bottom of your

projector.

Model No. Serial No.

Retain this information for future reference.

EXEMPTION CLAUSES

•Toshiba Corporation bears no responsibility in the case of damages arising from natural

disaster such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation,

operation, theft or mischief by third parties, other accidents, or use under abnormal

conditions including erroneous or improper operation and other problems.

•Toshiba Corporation bears no responsibility for incidental damages (lost profit, work

interruption, corruption or loss of the memory contents, etc.) arising from the use of or the

inability to use this unit.

•Toshiba Corporation accepts no liability whatsoever for any damages arising from not

having followed the descriptions in this Instruction Manual.

•Toshiba Corporation accepts no liability whatsoever for any damages arising from

malfunctions arising from combination with equipment or software that is not related to

Toshiba Corporation.

Andere Handbücher für TDP-MT200

Inhaltsverzeichnis

Andere Toshiba Projektor Handbücher

Toshiba

Toshiba TLP-WX100U - TLP WX100 WXGA LCD Projector Bedienungsanleitung

Toshiba

Toshiba TDP-SP1U - SVGA DLP Projector Bedienungsanleitung

Toshiba

Toshiba TDP-SC35 Bedienungsanleitung

Toshiba

Toshiba TDP-TW350U Montageanleitung

Toshiba

Toshiba TDP-EX20 Bedienungsanleitung

Toshiba

Toshiba TDP-TW420 Bedienungsanleitung

Toshiba

Toshiba TDP-T90 Bedienungsanleitung

Toshiba

Toshiba TDP-T98U Bedienungsanleitung

Toshiba

Toshiba TDP-ET20U Montageanleitung

Toshiba

Toshiba TDP MT700 Bedienungsanleitung

Toshiba

Toshiba TLP510 Bedienungsanleitung

Toshiba

Toshiba TDP-SW20 Bedienungsanleitung

Toshiba

Toshiba TDP-T30 Bedienungsanleitung

Toshiba

Toshiba X100U - TLP XGA LCD Projector Bedienungsanleitung

Toshiba

Toshiba TLP-XE30 Bedienungsanleitung

Toshiba

Toshiba TDP490 Bedienungsanleitung

Toshiba

Toshiba TDP-P6 Kurzanleitung

Toshiba

Toshiba TDP-P75 Bedienungsanleitung

Toshiba

Toshiba TLP-B2U Bedienungsanleitung

Toshiba

Toshiba TLP780E Bedienungsanleitung

Toshiba

Toshiba TLP-S40 Bedienungsanleitung

Toshiba

Toshiba TDP-T90U Bedienungsanleitung

Toshiba

Toshiba TLP780U Bedienungsanleitung

Toshiba

Toshiba TDP-MT200 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung