Toshiba TDP-P6 Bedienungsanleitung

USER’S GUIDE

TDP-P6

For assistance with your Toshiba projector in the

United States, please visit www.projectors.toshiba.com

or contact by phone at 800-829-8318.

For assistance with your Toshiba projector in Europe,

please visit www.toshiba-europe.com or contact your

local Toshiba dealer.

For assistance with your Toshiba projector in

Asia/Japan, please contact your local Toshiba dealer.

TDP-P6

Digital Projector

English Français Deutsch Español Japanese

TDPMT100.qxd 7/25/03 9:03 AM Page 1

English

Declaration of Conformity

Manufacturer: Toshiba Corporation

1-1, Shibaura 1-Chrome, Minato-ku, Tokyo, Japan

We declare under our sole responsibility that the TDP-P6 projector conform to the

following directives and norms:

EMC Directive 89/336/EEC, Amended by 93/68/EEC

EMC: EN 55022

EN 55024

EN 61000-3-2

EN 61000-3-3

Low Voltage Directive 73/23/EEC, Amended by 93/68/EEC

Safety: EN 60950: 2000

August, 2003

Trademarks

Apple, Macintosh, and PowerBook are trademarks or registered trademarks of Apple

Computer, Inc. IBM is a trademark or registered trademark of International Business

Machines, Inc. Microsoft, PowerPoint, and Windows are trademarks or registered

trademarks of Microsoft Corporation.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-

vide reasonable protection against harmful interference when the equipment is oper-

ated in a commercial environment. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instruc-

tion manual, may cause harmful interference to radio communications. Operation of

this equipment in a residential area is likely to cause harmful interference in which

case the user will be required to correct the interference at his own expense.

Agency Approvals

NOM, c-Tick, SJQA, IRAM

Other specific Country Approvals may apply, see please product certification label.

Canada

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

Remote Control Warning

Laser radiation class II product; wavelength 650nm; maximum output 1mW. Remote

control complies with applicable requirements of 21 CFR 1040.10 and 1040.11.

Remote control complies with applicable requirements of EN 60 825-1: 1994 +A11.

Do not look into the laser beam emitted

from the top of the remote control.

Table of Contents

Introduction 5

Connecting a computer 6

Required computer connections 6

Displaying a computer image 7

First-time projector use with Windows 98 8

Adjusting the image 10

Connecting a video device 11

Displaying a video image 12

Shutting down the projector 14

Troubleshooting your setup 14

Using the keypad buttons 22

Using the remote control 23

Using the audio 24

Optimizing computer images 25

Presentation features 25

Optimizing video images 26

Customizing the projector 26

Using the menus 27

Picture menu 28

Settings menu 31

Maintenance 34

Cleaning the lens 34

Replacing the projection lamp 35

Appendix 37

Accessories 37

For assistance with this projector 37

Red LED Behavior and Projector Errors 38

Projected image size 38

If you are experienced in setting up presentation systems, use the Quick Set

Up card that was included in the box. For complete details on connecting

and operating the projector, refer to this User’s Guide.

Important Operating Considerations

Do not place the projector on a tablecloth or other soft covering that may

block the vents. Intake vents are placed along the left, front and back sides

of the projector. Exhaust vents are placed along the right side of the projec-

tor. In the unlikely event that the lamp ruptures, discard any edible items

and thoroughly clean the area along the right side of the projector.

2 ft (.6m)

Do not place objects in the area along the right side of the projector

Introduction

Your new digital projector packs great performance into a shape and size

customized for the mobile professional. It fits comfortably in your laptop

bag then transitions easily into your presentation environment. It is easy to

connect, easy to use, and easy to maintain.

Projector components and features

documentation

remote

computer

cable

projector

power

cable

audio cable adapter

audio cable

S-video cable

S-video to composite adapter

lens cap*

* the lens cap with tether ships in the accessory pouch. Insert the tether into the small

hole under the lens when you unpack your projector.

carry

case

keypad

connectors

elevator foot release

zoom

focus

lens cap

IR receiver

for remote

computer s-video

audio

power cord

Connecting a computer

Required computer connections

Connect the black end of the computer cable to the Computer in connector

on the projector. Connect the blue end to the video (VGA) port on your com-

puter. If you are using a desktop computer with a single VGA port, you first

need to disconnect the monitor from that computer’s video port.

Connect the black power cable to the connector on the side of the projector

and to your electrical outlet.

The Power LED on the projector’s keypad turns solid green and the fans

start to run.

NOTE: Always use the power cable that shipped with the projector.

Optional computer connections

To advance slides in a PowerPoint™ presentation using the remote, plug the

USB connector on the computer cable into the USB mouse connector on

your computer. USB drivers must be installed to use the USB feature. For

more information, see page 9.

To have sound with your presentation, connect the audio cable to your com-

puter and to the computer Audio In connector on the projector.

connect computer cable

connect power cable

connect USB portion of

computer cable

connect audio cable

Displaying a computer image

Remove the lens cap.

Press the Power button on the top of the projector.

The LED flashes green. When the lamp comes on, the startup screen is dis-

played and the LED is steady green. It can take a minute for the image to

achieve full brightness.

? No startup screen? Get help on page 15.

Turn on your computer.

The computer’s image should appear on the projection screen. If it doesn’t,

press the Source button on the projector’s keypad.

Make sure your laptop’s external video port is active.

Many laptops do not automatically turn on their external video port when a

projector is connected. Refer to your computer’s documentation to learn the

activation commands specific for your computer. For example, some lap-

tops use a key combination of FN + F5 to turn the external display on and

off.

? No computer image? Try pressing the Auto Image

button on the keypad. Get help on page 16.

remove lens cap

press Power

turn on computer

source

activate laptop’s external port

First-time projector use with Windows 98

The first time you connect a computer running Windows 98 to the projector,

the computer recognizes the projector as “new hardware” and the Add

New Hardware Wizard appears. Follow these instructions to use the Wiz-

ard to load the correct driver (which was installed with your Windows

operating system).

If you are running Windows 2000, Windows ME, or Windows XP, skip these

steps and go to “Adjusting the image” on page 10.

aClick Next to begin searching for the driver.

bMake sure “Search for the best driver” is selected, then click Next.

cUncheck any checked boxes, then click Next. Windows automatically

locates the driver. If this driver has been removed, reload the driver using

your Windows operating system CD.

dWhen Windows finds the driver, you are ready to install it. Click Next.

Skip this page if you did not connect the USB portion of the computer

cable. The USB connection enables slide advance during presentations

and projector control software.

For Windows 98:

• If you connected the USB cable, the Add New Hardware Wizard

appears again. Drivers must be installed to use the USB functionality.

•The Wizard launches three times.

The first time it detects a USB Composite Device.

The second time a USB Human Interface Device (for the keyboard).

The third time it detects a USB Human Interface Device (for the

mouse).

For Windows 2000, Windows ME, and Windows XP:

• The USB drivers are automatically installed.

Adjusting the image

Adjust the height of the projector, if necessary, by pressing the release but-

ton to extend the elevator foot.

Position the projector the desired distance from the screen at a 90 degree

angle to the screen.

See page 38 for a table listing screen sizes and distances.

Adjust the zoom tab or the focus dial by rotating them until the desired

image size and sharpness are produced.

If the image is not square, adjust the keystone by using the buttons on the

keypad.

Press the upper Keystone button to reduce the upper part of the image, and

press the lower Keystone button to reduce the lower part.

Adjust the Contrast or Brightness in the Picture menu.

See page 27 for help with the menus.

adjust height

release button

adjust distance

adjust zoom and focus

focus

zoom

adjust keystone

adjust Contrast or Brightness

Andere Handbücher für TDP-P6

Inhaltsverzeichnis

Andere Toshiba Projektor Handbücher

Toshiba

Toshiba TLP-X4100U Bedienungsanleitung

Toshiba

Toshiba TLP-T72 Bedienungsanleitung

Toshiba

Toshiba TDP-T40 Bedienungsanleitung

Toshiba

Toshiba TLP680U - SXGA LCD Projector Bedienungsanleitung

Toshiba

Toshiba MT800 Bedienungsanleitung

Toshiba

Toshiba TLP-XC2500AU Bedienungsanleitung

Toshiba

Toshiba TDP-SC25 Bedienungsanleitung

Toshiba

Toshiba TLP X2500 Bedienungsanleitung

Toshiba

Toshiba TDP-S80U Bedienungsanleitung

Toshiba

Toshiba TDP-D1-US Bedienungsanleitung

Toshiba

Toshiba TDP-B1 Bedienungsanleitung

Toshiba

Toshiba TLP-681 Bedienungsanleitung

Toshiba

Toshiba TLP-710U Bedienungsanleitung

Toshiba

Toshiba TDP-D1 Bedienungsanleitung

Toshiba

Toshiba TDP-T45U - XGA DLP Projector Bedienungsanleitung

Toshiba

Toshiba TDP-TW355 Bedienungsanleitung

Toshiba

Toshiba TLP-X4500 Bedienungsanleitung

Toshiba

Toshiba TLP-B2E Bedienungsanleitung

Toshiba

Toshiba TDP-TW350U Montageanleitung

Toshiba

Toshiba TLP-B2E Bedienungsanleitung

Toshiba

Toshiba TLP-T50 Bedienungsanleitung

Toshiba

Toshiba TDP-P5-US Bedienungsanleitung

Toshiba

Toshiba TLP790 Bedienungsanleitung

Toshiba

Toshiba TLP-S10 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Philips

Philips LC1341 Referenzhandbuch

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung

Epson

Epson PowerLite 810p Bedienungsanleitung

BOXLIGHT

BOXLIGHT CP-322i/CP-634i Bedienungsanleitung