Toshiba TDP-P75 Bedienungsanleitung

English

Owner’s Manual

DATA Projector

TDP-P75

SAFETY PRECAUTION2

English

SAFETY PRECAUTION

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence of uninsulated "dangerous voltage"

within the product's enclosure that may be of sufficient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN

THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

WARNING: Handling the cord on this projector, or the cords associated with accessories

sold with this projector, will expose you to lead, a chemical known to the State

of California to cause birth defects or other reproductive harm. Wash hands

after handling.

WARNING: The lamp used in this projector contains mercury. Disposal of mercury may be

regulated due to environmental considerations. For disposal or recycling

information, please contact your local authorities or the Electronic Industries

Alliance: www.eiae.org.

MODEL NAME: TDP-P75

FCC NOTICE: This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. This

equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

TRADE NAME: DATA PROJECTOR MODEL NAME: TDP-P75

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

USA only

SAFETY PRECAUTION 3

English

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

- Consult the dealer or an experienced radio/TV technician for help.

RESPONSIBLE PARTY: TOSHIBA AMERICA INFORMATION SYSTEMS, INC.

9470 Irvine Blvd., Irvine, CA 92618-1697 U.S.A

Phone: (949) 583-3000

WARNING: Changes or modifications made to this equipment, not expressly approved

by Toshiba, or parties authorized by Toshiba, could void the user’s authority

to operate the equipment.

Notice: This Class B digital apparatus complies with Canadian ICES-003. Cet

appareil numérique de la classe B est conforme à la norme NMB-003 du

Canada.

USA only

CANADA only

IMPORTANT SAFETY INSTRUCTIONS4

English

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS

GIVEN IN THIS OWNER'S MANUAL AND THOSE MARKED ON THE UNIT.

RETAIN THIS BOOKLET FOR FUTURE REFERENCE.

This set has been designed and manufactured to ensure personal safety. Improper use

can result in electric shock or fire hazard. The safeguards incorporated in this unit will

protect you if you observe the following procedures for installation, use and servicing. This

unit is fully transistorized and does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER OR YOU MAY BE EXPOSED TO

DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL ONLY.

1. Read owner's manual

After unpacking this product, read the

owner's manual carefully, and follow

all the operating and other

instructions.

2. Power sources

This product should be operated only

from the type of power source

indicated on the marking label. If you

are not sure of the type of power

supply to your home, consult your

product dealer or local power

company. For products intended to

operate from battery power or other

sources, refer to the operating

instructions.

3. Source of light

Do not look into the lens while the

lamp is on. The strong light from the

lamp may cause damage to your eyes

or sight.

4. Heat

The product should be situated away

from heat sources such as radiators,

heat registers, stoves, or other

products (including amplifiers) that

produce heat.

IMPORTANT SAFETY INSTRUCTIONS 5

English

5. Ventilation

Openings in the cabinet are provided

for ventilation to ensure reliable

operation of the product and protect it

from overheating. These openings

must not be blocked or covered. The

openings should never be blocked by

placing the product on a bed, sofa, rug

or other similar surface. This product

should not be placed in a built-in

installation such as a bookcase or

rack unless proper ventilation is

provided or the manufacturer's

instructions have been adhered to.

6. Water and moisture

Do not use this product near water (for

example, near a bath tub, wash bowl,

kitchen sink, or laundry tub; in a wet

basement; or near a swimming pool).

7. Cleaning

Unplug this product from the wall

outlet before cleaning. Do not use

liquid cleaners or aerosol cleaners.

Use a soft cloth for cleaning.

8. Power cord protection

Power-supply cords should be routed

so that they are not likely to be walked

on or pinched by items placed upon or

against them, paying particular

attention to cords at plugs,

convenience receptacles, and the

point where they exit from

the product.

9. Overloading

Do not overload wall outlets; extension

cords, or integral convenience

receptacles as this can result in a risk

of fire or electric shock.

10. Object and liquid entry

Never push objects of any kind into

this product through the openings, as

they may touch dangerous voltage

points or short-out parts that could

result in a fire or electric shock. Never

spill liquid of any kind on the product.

IMPORTANT SAFETY INSTRUCTIONS6

English

11. Lightning storms

For added protection for this product

during a storm, or when it is left

unattended and unused for long

periods of time, unplug it from the

wall outlet. This will prevent damage

to the product due to lightning and

power line surges. However, while it

is thundering or lightning, do not

touch the apparatus and any

connected cable and/or equipment.

This will prevent you from receiving

the electric shock by an electric

surge.

12. Do not place the product

vertically.

Do not use the product in the upright

position to project pictures at the

ceiling, or any other vertical

positions. The product may fall over,

causing personal injury or product

damage.

13. Attachments

Do not use attachments not

recommended by the product

manufacturer, as they may cause

hazards.

14. Do not stack components.

Do not stack other equipment on this

product or stack this product on

other equipment. The top and

bottom surfaces of this product

develop heat and may damage the

other unit.

15. Accessories

Do not place this product on an

unstable cart, stand, tripod, bracket,

or table. The product may fall,

causing serious injury to a child or

adult, and serious damage to the

product. A product and cart

combination should be moved with

care. Quick stops, excessive force,

and uneven surfaces may cause the

product and cart combination to

overturn.

S3125A

IMPORTANT SAFETY INSTRUCTIONS 7

English

16. Damage requiring service

Unplug this product from the wall outlet

and refer servicing to qualified service

personnel under the following

conditions:

a) when the power-supply cord or plug is

damaged;

b) if liquid has been spilled or objects

have fallen into the product;

c) if the product has been exposed to rain

or water;

d) if the product does not operate

normally by following the operating

instructions (adjust only those controls

that are covered by the operating

instructionsasan improperadjustment

of other controls may result in damage

and will often require extensive work

by a qualified technician to restore the

product to its normal operation);

e) if the product has been dropped or

damaged in any way; or

f) when the product exhibits a distinct

change in performance.

17. If glass components,

including the lens and lamp,

should break, contact your

dealer for repair service.

This product incorporates glass

components, including the lens and

lamp. If such parts should break,

please handle with care to avoid injury.

Contact your dealer for repair service.

The broken pieces of glass may cause

injury. In the unlikely event of the lamp

rupturing, thoroughly clean the area

around the projector and discard any

edible items placed in that area.

18. Servicing

Do not attempt to service this

product yourself, as opening or

removing covers may expose you

to dangerous voltage or other

hazards. Refer all servicing to

qualified service personnel.

19. Replacement parts

When replacement parts are

required, be sure the service

technician has used replacement

parts specified by the

manufacturer or that have the

same characteristics as the

original part. Unauthorized

substitutions may result in fire,

electric shock, or other hazards.

(The lamp is the only

user-replaceable part.)

20. Safety check

Upon completion of any service or

repairs to this product, ask the

service technician to perform

safety checks to determine that the

product is in proper operating

condition.

POWER SUPPLY CORD SELECTION8

English

POWER SUPPLY CORD SELECTION

If your line voltage is 220 to 240V, use one of the following types of cable.

21. Do not leave thermal-paper

documents or easily

deformed items on top of the

unit or near the air exhaust

for long periods of time.

The heat from the unit could erase the

information on the thermal paper, or

cause deformation or warping.

22. Do not use the product in a

closed installation state.

Do not place the product in a box or in

any other closed installation state.

Otherwise it may overheat. This could

result in a risk of fire.

Plug

configuration Plug type Line

voltage Plug

configuration Plug type Line

voltage

EURO 220 - 240V Australian

240V

10A

200 - 240V

UK 220 - 240V Switzerland

240V

200 - 240V

Use a 5A fuse approved by ASTA or BSI

to BSI362.

Always replace the fuse cover after

changing the fuse.

North

American

240V

10A

200 - 240V

IMPORTANT PRECAUTIONS 9

English

IMPORTANT PRECAUTIONS

Save Original Packing Materials

The original shipping carton and packing materials will come in handy if you ever

have to ship your projector. For maximum protection, repack the set as it was

originally packed at the factory.

Moisture Condensation

Never operate this unit immediately after moving it from a cold location to a warm

location. When the unit is exposed to such a change in temperature, moisture

may condense on the crucial internal parts. To prevent the unit from possible

damage, do not use the unit for at least 2 hours after there is an extreme or

sudden change in temperature.

Location and Installation

• Do not place in hot locations, such as near a heater. Doing so could cause

malfunction and shorten the life of the projector.

• Avoid locations with oil or cigarette smoke, which can affect the quality and

useful life of the product’s optical parts and darken the screen.

• Do not use the product vertically in any upright position or slantwise at an angle

of 20 degrees or more.

• Using this product near a TV or radio may cause interference in the image or

sound. If this happens, move it away from the TV or radio.

• In a high-altitude location where the air is thin, cooling efficiency is reduced;

therefore, use the projector in a cool area.

Avoid Volatile Liquids

Do not use volatile liquids, such as an insect spray, near the unit. Do not leave

rubber or plastic products touching the unit for a long time. They will leave marks

on the finish. If cleaning with a chemically saturated cloth, be sure to follow the

product's precautions.

In the spaces provided below, record the model and serial numbers located at the

bottom of your projector.

Model No. Serial No.

Retain this information for future reference.

EXEMPTION CLAUSES10

English

EXEMPTION CLAUSES

• Toshiba Corporation bears no responsibility in the case of damages arising from

natural disaster such as earthquakes, lightning, etc., fire not liable to Toshiba

Corporation, acts by third parties, other accidents, or use under abnormal

conditions including erroneous or improper operation and other problems.

• Toshiba Corporation bears no responsibility for incidental damages (lost profit,

work interruption, corruption or loss of the memory contents, etc.) arising from

the use of or the inability to use this unit.

• Toshiba Corporation accepts no liability whatsoever for any damages arising

from not having followed the descriptions in this Instruction Manual.

• Toshiba Corporation accepts no liability whatsoever for any damages arising

from malfunctions arising from combination with equipment or software that is

not related to Toshiba Corporation.

Andere Handbücher für TDP-P75

Inhaltsverzeichnis

Andere Toshiba Projektor Handbücher

Toshiba

Toshiba TLP-X3000AU Bedienungsanleitung

Toshiba

Toshiba TDP-MT8U Bedienungsanleitung

Toshiba

Toshiba TLP-T400U Bedienungsanleitung

Toshiba

Toshiba TDP-MT700 Bedienungsanleitung

Toshiba

Toshiba TLP-X4100E Bedienungsanleitung

Toshiba

Toshiba TDP-S1-US Bedienungsanleitung

Toshiba

Toshiba TLP680U - SXGA LCD Projector Referenzhandbuch

Toshiba

Toshiba TDP-P7 Montageanleitung

Toshiba

Toshiba TLP-XD2000 - XGA LCD Projector Bedienungsanleitung

Toshiba

Toshiba TDP-ET20 Bedienungsanleitung

Toshiba

Toshiba TDP-T98U Bedienungsanleitung

Toshiba

Toshiba TDP-T99U Bedienungsanleitung

Toshiba

Toshiba TLP-X2500A Bedienungsanleitung

Toshiba

Toshiba X100U - TLP XGA LCD Projector Bedienungsanleitung

Toshiba

Toshiba TDP-T420 Bedienungsanleitung

Toshiba

Toshiba TDP-S35CC Bedienungsanleitung

Toshiba

Toshiba TLP-MT4 Bedienungsanleitung

Toshiba

Toshiba TDP-B1-US Bedienungsanleitung

Toshiba

Toshiba TDP-SC35U Bedienungsanleitung

Toshiba

Toshiba TLP-XC2000U Bedienungsanleitung

Toshiba

Toshiba TDP-P3-US Bedienungsanleitung

Toshiba

Toshiba TDP-TW100U Bedienungsanleitung

Toshiba

Toshiba MT400 Bedienungsanleitung

Toshiba

Toshiba TLP-MT7E Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung