Toshiba TLP680U - SXGA LCD Projector Referenzhandbuch
3LCD DATA PROJECTOR
QUICK REFERENCE CARD
“Camera” function is equipped only with the model which has a document imaging camera model.
1
2
Projecting a Picture
• Connect external equipment
such as a computer or
video tape player. (See
above)
• Connect the power cord to
the projector.
Press ON/STANDBY.
Both the ON and LAMP indications light up
in green.
Turn on the connected equipment
and put it in playback mode.
5
Press INPUT to select the
input source.
RGB: RGB input picture
Video: VIDEO input picture
Camera: Camera input picture
Adjust the picture size and
focus.
Zoom ring: Adjust the picture size.
Focus ring: Focus the picture.
4
3
ON/STANDBY
INPUT
Connection with External Equipment
RS-232C
CONTROL RGB AUDIO
MONITOR OUTPUT RGB
S-VIDEO VIDEO
VIDEO INPUT
L - AUDIO -R
AUDIO
RGB INPUT
You can connect an
extra monitor to view
the picture. To MONITOR OUTPUT (AUDIO)
∅3.5mm STEREO mini plug
(Audio output level is constant.)
Audio cable
(not supplied)
Connect a stereo system
for dynamic sound.
To
monitor
port
To
audio
output port
RGB cable (supplied)
PC audio cable (supplied)
To RGB
INPUT
(AUDIO)
To RGB
INPUT (RGB)
To VIDEO
INPUT
(S-VIDEO)
To S-VIDEO output
To Video output
(yellow)
To Audio output
(white)
To Audio output
(red)
Audio/Video cable (supplied)
S-VIDEO cable (not supplied)
To VIDEO INPUT (VIDEO) (yellow)
To VIDEO INPUT (AUDIO L) (white)
To VIDEO INPUT (AUDIO R) (red)
Video tape player
You can connect a computer
to control the projector.
To CR(PR)
output
To CB(PB)
output
To Y output
Audio cable (not supplied)
(not supplied)
To audio output L
(white)
To RGB
INPUT
(AUDIO)
To RGB INPUT (RGB)
To audio output R
(red)
Video player with color difference output
Adapter for Macintosh
computers only (supplied)
Computer
To audio input
For more informations about usage and operations, see the owner’s manual.
4) Open the camera head.
5) Turn the camera head.
6) Pull up the light.
7) Turn the light.
1
Projecting Images with the Document Imaging Camera
3
4
Place a document onto or
around the projector, and turn
the camera head to direction
of the document.
Press CAMERA.
The appeared image is a projected one
through the camera.
Move the camera head to
adjust the size of the picture,
and focus on the picture by
turning the focusing ring on
the camera head.
5
After using, return the arm to the original position in the
reverse order.
1) Raise up the arm.
2) Stretch the arm.
3) Turn the arm.
CAMERA
Press ARM LIGHT.
The light turns on.
ARM LIGHT
2
1
2
Turning Off the Power After Use
Put the connected equipment
in the stop mode.
Press ON/STANDBY.
An instruction message appears.
Press ON/STANDBY again.
(Power turns off and then the lamp goes
off.)
After confirming the exhaust
fan stops, unplug the power
cord.
3
4
ON/STANDBY
ON/STANDBY
document
Up : to reduce.
Down :To enlarge.
Focusing ring
N : Near
F : Far
Adjustment and Function Setting
1Press MENU.
The menu is displayed.
2Press or to select the item.
(Item not marked with ). Press or to adjust the value or select the setting.
5Press MENU.
The menu disappears.
Note: Pressing RESET of the remote control will return the adjustment or setting currently selected to default.
4(Item marked with ). Press ENTER to execute the item.
Auto set... To correct the keystone
distortion automatically
Adjust...... To make the correction of
keystone distortion
Contrast ..................... Contrast
Brightness .................. Brightness
Color .......................... Colordensity
Tint ............................ Tint
Sharpness .................. Sharpness
R-level ....................... Red level
G-level ....................... Green level
B-level ........................ Blue level
Camera gain .............. Sensitivity
Volume .. Toadjustthesoundvolume
Bass ..... To adjust the bass
Treble ... To adjust the treble
Language ........ To select the lan-
guage
Proj. mode....... To set the projecting
orientation
RGB input ....... Tosetthesignaltype
Video signal ..... Tosetthesignaltype
Scrn display ... Touseordisableon-
screen displays
Save data ... To savethe adjustments
and settings on the
menu.
All preset ....To restore the adjust-
ments and settings on
the menu to the factory
set.
Auto sync. .... Toadjusttheimageau-
tomatically
Phase .......... To reduce flickers
H-Position .... Toshiftthe imagehori-
zontally
V-Position ..... To shift the image ver-
tically
Clock ........... To remove vertical
stripes
MENU
MENU
3Press or to select the item.
Auto set
Keystone
Adjust
–+
Auto syn
Image
c.
Phase
–+
H–pos i t ion
V–pos i t ion
Clock
–+
–+
–+
Con t r as t
Picture
–+
Brightness
Color
–+
–+
Tint
Sharpness
–+
–+
R- level
–+
G- level
–+
B- level
–+
Camera gain
–+
Volume
Audio
–+
Bass
Treble
–+
–+
Language
De f au l t
Proj .mode
RGB input
Video s ignal
y
Scrn displa
Eng l i sh
Standard
RGB
Auto
On
ENTER
Save da t
Save
a
Al l preset
Andere Handbücher für TLP680U - SXGA LCD Projector
1
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Toshiba Projektor Handbücher
Toshiba
Toshiba t90 series Bedienungsanleitung
Toshiba
Toshiba TDP-EX21 Bedienungsanleitung
Toshiba
Toshiba TLP-MT7 - LCD Projector - 1000 ANSI Lumens Bedienungsanleitung
Toshiba
Toshiba TDP-T420 Bedienungsanleitung
Toshiba
Toshiba TLP-261 Bedienungsanleitung
Toshiba
Toshiba TDP-S80U Bedienungsanleitung
Toshiba
Toshiba TLP-510U Bedienungsanleitung
Toshiba
Toshiba TLP-MT3E Bedienungsanleitung
Toshiba
Toshiba TXP450 Bedienungsanleitung
Toshiba
Toshiba TLP-450 Referenzhandbuch
Toshiba
Toshiba TLP-B2E Bedienungsanleitung
Toshiba
Toshiba MT800 Bedienungsanleitung
Toshiba
Toshiba TLP-ET1E Bedienungsanleitung
Toshiba
Toshiba TLP-S10U - SVGA LCD Projector Bedienungsanleitung
Toshiba
Toshiba TLP-TW90 Bedienungsanleitung
Toshiba
Toshiba TLP-X150 Bedienungsanleitung
Toshiba
Toshiba Camileo TDP-S20 Bedienungsanleitung
Toshiba
Toshiba TLP710E Installationsanleitung
Toshiba
Toshiba TLP-S10 Bedienungsanleitung
Toshiba
Toshiba TLP-X3000 Bedienungsanleitung
