Toshiba ASD-MTG-KITQ9 Bedienungs- und Wartungshandbuch

Inhaltsverzeichnis

Andere Toshiba Fernbedienung Handbücher

Toshiba

Toshiba RBC-AX22CE2 Bedienungsanleitung

Toshiba

Toshiba RBC-AMT32E Bedienungsanleitung

Toshiba

Toshiba RBC-IR2-PE Bedienungsanleitung

Toshiba

Toshiba RBC-AX32UM(W)-E Bedienungsanleitung

Toshiba

Toshiba TCB-SC640U-E Bedienungsanleitung

Toshiba

Toshiba XV55*D Series Bedienungsanleitung

Toshiba

Toshiba CAMILEO H30 Montage- und Bedienungsanleitung

Toshiba

Toshiba 2358 9721 Bedienungsanleitung

Toshiba

Toshiba RBC-AX32CE2 Bedienungsanleitung

Toshiba

Toshiba RBC-AMT21E Bedienungsanleitung

Toshiba

Toshiba Regza 32WLT68 Bedienungsanleitung

Toshiba

Toshiba RBC-AMS55E-ES Bedienungsanleitung

Toshiba

Toshiba TCB-SC643TLE Bedienungsanleitung

Toshiba

Toshiba CT-8002 Bedienungsanleitung

Toshiba

Toshiba TCB-AX21E Bedienungsanleitung

Toshiba

Toshiba RBP-RC001-E Betriebsanleitung

Toshiba

Toshiba RBC-AX33UYP-E Bedienungsanleitung

Toshiba

Toshiba Carrier RBC-AX22CUL Bedienungsanleitung

Toshiba

Toshiba Carrier TCB-AX21UL Bedienungsanleitung

Toshiba

Toshiba RBC-SRC-PE Bedienungsanleitung

Toshiba

Toshiba RBC-ASC11E Bedienungsanleitung

Toshiba

Toshiba RBC-AS21UL Bedienungsanleitung

Toshiba

Toshiba RBC-AXU33UPB-E Bedienungsanleitung

Toshiba

Toshiba RBC-AX22CE Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung

Document Number: 60910-000 1

ASD-MTG-KITQ9 Installation Procedure

The Q9 ASD may be controlled from a remotely-mounted Electronic Operator Interface (EOI).

The remotely-mounted EOI can operate up to 9 feet away from the ASD.

An EOI extender cable is required for remote mounting and is included with the ASD-MTG-KITQ9.

EOI-to-ASD functionality is the same whether the EOI is mounted to the ASD power unit or mounted

remotely.

Required Remote-mount Hardware

EOI Remote-Mount Assembly

• ASD-MTG-KITQ9 Assy.

Mounting Precautions

• The ambient operating temperature range of the EOI is 14° – 104° F (-10 – 40° C).

• Mount the unit securely in a well ventilated area that is out of direct sunlight.

• Select a mounting location that is easily accessible by the user.

• Avoid installation in areas where vibration, heat, humidity, dust, metal particles, or high levels of

electrical noise (EMI) are present.

• Do not install the EOI where it may be exposed to flammable chemicals or gasses, or any fluids

(i.e., water, solvents, etc.).

Remote EOI Installation

Installation, operation, and maintenance shall be performed by Qualified Personnel Only.

Read and adhere to the Safety Precautions and Warnings of the Installation and

Operation Manual of the ASD.

1. At the Remote EOI mounting location, identify and mark the locations of the 4.56” by 4.44” hole

and the four 7/32” screw holes (see Figure 1).

2. Cut the 4.56” by 4.44” rectangular mounting hole.

3. Drill the four 7/32” screw holes for the four mounting studs of the mounting plate of the Remote

EOI.

4. Attach and secure the Remote EOI to the front side of the mounting location using the four #10 flat

washers, #10 split lock washers, and the 10-32 hex nuts.

5. Remove the front panel assembly of the ASD — Using a flat screwdriver, release the upper

retaining tabs of the EOI panel then pivot the EOI assembly away from the ASD and lift (see

Figure 2).

6. Remove the Display Module from the panel assembly of step 5— discard the panel assembly.

2Document Number: 60910-000

7. Install the Display Module into the Remote EOI assembly.

When installing the Display Module into the housing ensure that the left side of the display is

inserted first with the top and bottom catches securely in place (adjacent to the Phillips screws at

underside of display). This ensures the proper alignment and electrical connection of the CNX

connector of the Display Module PCB. Then gently hold the display in place while securing the

Phillips mounting screw.

8. Reversing the assembly procedure of step 5, install the Front Panel Connector assembly onto the

ASD.

9. Connect the EOI extender cable (P/N 76268) from the Remote EOI assembly to the Front Panel

Connector assembly.

—Turn the power on only after installing all covers and securing the door of the ASD—

Figure 1. Remote EOI Mounting Dimensions (inches/mm).

Figure 2. EOI Removal/Front Panel Installation.